5e35b4562f
Previously, wifi detect simply dumped its generated wireless
configuration to STDOUT. A second step was needed to append
the configuration to /etc/config/wireless (or create it, if
it didn't exist).
With this patch, The wifi detection script will now use uci
to update the wireless configuration directly.
This patch also makes the initially created wifi-iface a
named section ('default_radio$X' for mac80211 and
'default_wl$X' for broadcom). With this change, uci will
not print the cfgHASH to STDOUT (which would now corrupt
the wireless configuration). It will also prevent adding
duplicated wifi interface configurations, if the wifi
configuration is run concurrently.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
477 lines
11 KiB
Bash
477 lines
11 KiB
Bash
append DRIVERS "broadcom"
|
|
|
|
scan_broadcom() {
|
|
local device="$1"
|
|
local vif vifs wds
|
|
local adhoc sta apmode mon disabled
|
|
local adhoc_if sta_if ap_if mon_if
|
|
|
|
config_get vifs "$device" vifs
|
|
for vif in $vifs; do
|
|
config_get_bool disabled "$vif" disabled 0
|
|
[ $disabled -eq 0 ] || continue
|
|
|
|
local mode
|
|
config_get mode "$vif" mode
|
|
case "$mode" in
|
|
adhoc)
|
|
adhoc=1
|
|
adhoc_if="$vif"
|
|
;;
|
|
sta)
|
|
sta=1
|
|
sta_if="$vif"
|
|
;;
|
|
ap)
|
|
apmode=1
|
|
ap_if="${ap_if:+$ap_if }$vif"
|
|
;;
|
|
wds)
|
|
local addr
|
|
config_get addr "$vif" bssid
|
|
[ -z "$addr" ] || {
|
|
addr=$(echo "$addr" | tr 'A-F' 'a-f')
|
|
append wds "$addr"
|
|
}
|
|
;;
|
|
monitor)
|
|
mon=1
|
|
mon_if="$vif"
|
|
;;
|
|
*) echo "$device($vif): Invalid mode";;
|
|
esac
|
|
done
|
|
config_set "$device" wds "$wds"
|
|
|
|
local _c=
|
|
for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
|
|
config_set "$vif" ifname "${device}${_c:+-$_c}"
|
|
_c=$((${_c:-0} + 1))
|
|
done
|
|
config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
|
|
|
|
ap=1
|
|
infra=1
|
|
if [ "$_c" -gt 1 ]; then
|
|
mssid=1
|
|
else
|
|
mssid=
|
|
fi
|
|
apsta=0
|
|
radio=1
|
|
monitor=0
|
|
case "$adhoc:$sta:$apmode:$mon" in
|
|
1*)
|
|
ap=0
|
|
mssid=
|
|
infra=0
|
|
;;
|
|
:1:1:)
|
|
apsta=1
|
|
wet=1
|
|
;;
|
|
:1::)
|
|
wet=1
|
|
ap=0
|
|
mssid=
|
|
;;
|
|
:::1)
|
|
wet=1
|
|
ap=0
|
|
mssid=
|
|
monitor=1
|
|
;;
|
|
::)
|
|
radio=0
|
|
;;
|
|
esac
|
|
}
|
|
|
|
disable_broadcom() {
|
|
local device="$1"
|
|
set_wifi_down "$device"
|
|
(
|
|
include /lib/network
|
|
|
|
local pid_file=/var/run/nas.$device.pid
|
|
[ -e $pid_file ] && start-stop-daemon -K -q -s SIGKILL -p $pid_file && rm $pid_file
|
|
|
|
# make sure the interfaces are down and removed from all bridges
|
|
local dev ifname
|
|
for dev in /sys/class/net/wds${device##wl}-* /sys/class/net/${device}-* /sys/class/net/${device}; do
|
|
if [ -e "$dev" ]; then
|
|
ifname=${dev##/sys/class/net/}
|
|
ip link set dev "$ifname" down
|
|
unbridge "$ifname"
|
|
fi
|
|
done
|
|
|
|
# make sure all of the devices are disabled in the driver
|
|
local ifdown=
|
|
local bssmax=$(wlc ifname "$device" bssmax)
|
|
local vif=$((${bssmax:-4} - 1))
|
|
append ifdown "down" "$N"
|
|
append ifdown "wds none" "$N"
|
|
while [ $vif -ge 0 ]; do
|
|
append ifdown "vif $vif" "$N"
|
|
append ifdown "enabled 0" "$N"
|
|
vif=$(($vif - 1))
|
|
done
|
|
|
|
wlc ifname "$device" stdin <<EOF
|
|
$ifdown
|
|
leddc 0xffff
|
|
EOF
|
|
)
|
|
true
|
|
}
|
|
|
|
enable_broadcom() {
|
|
local device="$1"
|
|
local channel country maxassoc wds vifs distance slottime rxantenna txantenna
|
|
local frameburst macfilter maclist macaddr txpower frag rts hwmode htmode
|
|
config_get channel "$device" channel
|
|
config_get country "$device" country
|
|
config_get maxassoc "$device" maxassoc
|
|
config_get wds "$device" wds
|
|
config_get vifs "$device" vifs
|
|
config_get distance "$device" distance
|
|
config_get slottime "$device" slottime
|
|
config_get rxantenna "$device" rxantenna
|
|
config_get txantenna "$device" txantenna
|
|
config_get_bool frameburst "$device" frameburst
|
|
config_get macfilter "$device" macfilter
|
|
config_get maclist "$device" maclist
|
|
config_get macaddr "$device" macaddr $(wlc ifname "$device" default_bssid)
|
|
config_get txpower "$device" txpower
|
|
config_get frag "$device" frag
|
|
config_get rts "$device" rts
|
|
config_get hwmode "$device" hwmode
|
|
config_get htmode "$device" htmode
|
|
local doth=0
|
|
local wmm=1
|
|
|
|
[ -z "$slottime" ] && {
|
|
[ -n "$distance" ] && {
|
|
# slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0)
|
|
slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))"
|
|
}
|
|
} || {
|
|
slottime="${slottime:--1}"
|
|
}
|
|
|
|
case "$macfilter" in
|
|
allow|2)
|
|
macfilter=2;
|
|
;;
|
|
deny|1)
|
|
macfilter=1;
|
|
;;
|
|
disable|none|0)
|
|
macfilter=0;
|
|
;;
|
|
esac
|
|
|
|
local gmode=2 nmode=0 nreqd=
|
|
case "$hwmode" in
|
|
*a) gmode=;;
|
|
*b) gmode=0;;
|
|
*bg) gmode=1;;
|
|
*g) gmode=2;;
|
|
*gst) gmode=4;;
|
|
*lrs) gmode=5;;
|
|
*) nmode=1; nreqd=0;;
|
|
esac
|
|
|
|
case "$hwmode" in
|
|
n|11n) nmode=1; nreqd=1;;
|
|
*n*) nmode=1; nreqd=0;;
|
|
esac
|
|
|
|
# Use 'nmode' for N-Phy only
|
|
[ "$(wlc ifname "$device" phytype)" = 4 ] || nmode=
|
|
|
|
local band chanspec
|
|
[ ${channel:-0} -ge 1 -a ${channel:-0} -le 14 ] && band=2
|
|
[ ${channel:-0} -ge 36 ] && {
|
|
band=1
|
|
gmode=
|
|
}
|
|
|
|
# Use 'chanspec' instead of 'channel' for 'N' modes (See bcmwifi.h)
|
|
[ -n "$nmode" -a -n "$band" -a -n "$channel" ] && {
|
|
case "$htmode" in
|
|
HT40)
|
|
if [ -n "$gmode" ]; then
|
|
[ $channel -lt 7 ] && htmode="HT40+" || htmode="HT40-"
|
|
else
|
|
[ $(( ($channel / 4) % 2 )) -eq 1 ] && htmode="HT40+" || htmode="HT40-"
|
|
fi
|
|
;;
|
|
esac
|
|
case "$htmode" in
|
|
HT40-) chanspec=$(printf 0x%x%x%02x $band 0xe $(($channel - 2))); nmode=1; channel=;;
|
|
HT40+) chanspec=$(printf 0x%x%x%02x $band 0xd $(($channel + 2))); nmode=1; channel=;;
|
|
HT20) chanspec=$(printf 0x%x%x%02x $band 0xb $channel); nmode=1; channel=;;
|
|
*) ;;
|
|
esac
|
|
}
|
|
|
|
local leddc=$(wlc ifname "$device" leddc)
|
|
[ $((leddc)) -eq $((0xffff)) ] && {
|
|
leddc=0x005a000a;
|
|
}
|
|
|
|
local _c=0
|
|
local nas="$(which nas)"
|
|
local if_pre_up if_up nas_cmd
|
|
local vif vif_pre_up vif_post_up vif_do_up vif_txpower
|
|
local bssmax=$(wlc ifname "$device" bssmax)
|
|
bssmax=${bssmax:-4}
|
|
|
|
for vif in $vifs; do
|
|
[ $_c -ge $bssmax ] && break
|
|
|
|
config_get vif_txpower "$vif" txpower
|
|
|
|
local mode
|
|
config_get mode "$vif" mode
|
|
append vif_pre_up "vif $_c" "$N"
|
|
append vif_post_up "vif $_c" "$N"
|
|
append vif_do_up "vif $_c" "$N"
|
|
|
|
config_get_bool wmm "$vif" wmm "$wmm"
|
|
config_get_bool doth "$vif" doth "$doth"
|
|
|
|
[ "$mode" = "sta" ] || {
|
|
local hidden isolate
|
|
config_get_bool hidden "$vif" hidden 0
|
|
append vif_pre_up "closed $hidden" "$N"
|
|
config_get_bool isolate "$vif" isolate 0
|
|
append vif_pre_up "ap_isolate $isolate" "$N"
|
|
}
|
|
|
|
local wsec_r=0
|
|
local eap_r=0
|
|
local wsec=0
|
|
local auth=0
|
|
local nasopts=
|
|
local enc key rekey
|
|
|
|
config_get enc "$vif" encryption
|
|
case "$enc" in
|
|
*wep*)
|
|
local def defkey k knr
|
|
wsec_r=1
|
|
wsec=1
|
|
defkey=1
|
|
config_get key "$vif" key
|
|
case "$enc" in
|
|
*shared*) append vif_do_up "wepauth 1" "$N";;
|
|
*) append vif_do_up "wepauth 0" "$N";;
|
|
esac
|
|
case "$key" in
|
|
[1234])
|
|
defkey="$key"
|
|
for knr in 1 2 3 4; do
|
|
config_get k "$vif" key$knr
|
|
[ -n "$k" ] || continue
|
|
[ "$defkey" = "$knr" ] && def="=" || def=""
|
|
append vif_do_up "wepkey $def$knr,$k" "$N"
|
|
done
|
|
;;
|
|
"");;
|
|
*) append vif_do_up "wepkey =1,$key" "$N";;
|
|
esac
|
|
;;
|
|
*psk*)
|
|
wsec_r=1
|
|
config_get key "$vif" key
|
|
|
|
# psk version + default cipher
|
|
case "$enc" in
|
|
*mixed*|*psk+psk2*) auth=132; wsec=6;;
|
|
*psk2*) auth=128; wsec=4;;
|
|
*) auth=4; wsec=2;;
|
|
esac
|
|
|
|
# cipher override
|
|
case "$enc" in
|
|
*tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
|
|
*aes*|*ccmp*) wsec=4;;
|
|
*tkip*) wsec=2;;
|
|
esac
|
|
|
|
# group rekey interval
|
|
config_get rekey "$vif" wpa_group_rekey
|
|
|
|
eval "${vif}_key=\"\$key\""
|
|
nasopts="-k \"\$${vif}_key\"${rekey:+ -g $rekey}"
|
|
;;
|
|
*wpa*)
|
|
local auth_port auth_secret auth_server
|
|
wsec_r=1
|
|
eap_r=1
|
|
config_get auth_server "$vif" auth_server
|
|
[ -z "$auth_server" ] && config_get auth_server "$vif" server
|
|
config_get auth_port "$vif" auth_port
|
|
[ -z "$auth_port" ] && config_get auth_port "$vif" port
|
|
config_get auth_secret "$vif" auth_secret
|
|
[ -z "$auth_secret" ] && config_get auth_secret "$vif" key
|
|
|
|
# wpa version + default cipher
|
|
case "$enc" in
|
|
*mixed*|*wpa+wpa2*) auth=66; wsec=6;;
|
|
*wpa2*) auth=64; wsec=4;;
|
|
*) auth=2; wsec=2;;
|
|
esac
|
|
|
|
# cipher override
|
|
case "$enc" in
|
|
*tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
|
|
*aes*|*ccmp*) wsec=4;;
|
|
*tkip*) wsec=2;;
|
|
esac
|
|
|
|
# group rekey interval
|
|
config_get rekey "$vif" wpa_group_rekey
|
|
|
|
eval "${vif}_key=\"\$auth_secret\""
|
|
nasopts="-r \"\$${vif}_key\" -h $auth_server -p ${auth_port:-1812}${rekey:+ -g $rekey}"
|
|
;;
|
|
esac
|
|
append vif_do_up "wsec $wsec" "$N"
|
|
append vif_do_up "wpa_auth $auth" "$N"
|
|
append vif_do_up "wsec_restrict $wsec_r" "$N"
|
|
append vif_do_up "eap_restrict $eap_r" "$N"
|
|
|
|
local ssid
|
|
config_get ssid "$vif" ssid
|
|
append vif_post_up "vlan_mode 0" "$N"
|
|
append vif_pre_up "ssid $ssid" "$N"
|
|
|
|
[ "$mode" = "monitor" ] && {
|
|
append vif_post_up "monitor $monitor" "$N"
|
|
}
|
|
|
|
[ "$mode" = "adhoc" ] && {
|
|
local bssid
|
|
config_get bssid "$vif" bssid
|
|
[ -n "$bssid" ] && {
|
|
append vif_pre_up "bssid $bssid" "$N"
|
|
append vif_pre_up "ibss_merge 0" "$N"
|
|
} || {
|
|
append vif_pre_up "ibss_merge 1" "$N"
|
|
}
|
|
}
|
|
|
|
append vif_post_up "enabled 1" "$N"
|
|
|
|
local ifname
|
|
config_get ifname "$vif" ifname
|
|
local if_cmd="if_pre_up"
|
|
[ "$ifname" != "${ifname##${device}-}" ] && if_cmd="if_up"
|
|
append $if_cmd "macaddr=\$(wlc ifname '$ifname' cur_etheraddr)" ";$N"
|
|
append $if_cmd "ip link set dev '$ifname' address \$macaddr" ";$N"
|
|
append if_up "ip link set dev '$ifname' up" ";$N"
|
|
|
|
local net_cfg="$(find_net_config "$vif")"
|
|
[ -z "$net_cfg" ] || {
|
|
ubus -t 30 wait_for network.interface."$net_cfg"
|
|
append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
|
|
append if_up "start_net '$ifname' '$net_cfg'" ";$N"
|
|
}
|
|
[ -z "$nas" -o -z "$nasopts" ] || {
|
|
eval "${vif}_ssid=\"\$ssid\""
|
|
local nas_mode="-A"
|
|
[ "$mode" = "sta" ] && nas_mode="-S"
|
|
[ -z "$nas_cmd" ] && {
|
|
local pid_file=/var/run/nas.$device.pid
|
|
nas_cmd="start-stop-daemon -S -b -p $pid_file -x $nas -- -P $pid_file -H 34954"
|
|
}
|
|
append nas_cmd "-i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 -F $nasopts"
|
|
}
|
|
_c=$(($_c + 1))
|
|
done
|
|
wlc ifname "$device" stdin <<EOF
|
|
${macaddr:+bssid $macaddr}
|
|
${macaddr:+cur_etheraddr $macaddr}
|
|
band ${band:-0}
|
|
${nmode:+nmode $nmode}
|
|
${nmode:+${nreqd:+nreqd $nreqd}}
|
|
${gmode:+gmode $gmode}
|
|
leddc $leddc
|
|
apsta $apsta
|
|
ap $ap
|
|
${mssid:+mssid $mssid}
|
|
infra $infra
|
|
${wet:+wet 1}
|
|
802.11d 0
|
|
802.11h ${doth:-0}
|
|
wme ${wmm:-1}
|
|
rxant ${rxantenna:-3}
|
|
txant ${txantenna:-3}
|
|
fragthresh ${frag:-2346}
|
|
rtsthresh ${rts:-2347}
|
|
monitor ${monitor:-0}
|
|
|
|
radio ${radio:-1}
|
|
macfilter ${macfilter:-0}
|
|
maclist ${maclist:-none}
|
|
${wds:+wds $wds}
|
|
country ${country:-US}
|
|
${channel:+channel $channel}
|
|
${chanspec:+chanspec $chanspec}
|
|
maxassoc ${maxassoc:-128}
|
|
slottime ${slottime:--1}
|
|
${frameburst:+frameburst $frameburst}
|
|
|
|
$vif_pre_up
|
|
EOF
|
|
eval "$if_pre_up"
|
|
wlc ifname "$device" stdin <<EOF
|
|
up
|
|
$vif_post_up
|
|
EOF
|
|
eval "$if_up"
|
|
wlc ifname "$device" stdin <<EOF
|
|
$vif_do_up
|
|
EOF
|
|
|
|
# use vif_txpower (from last wifi-iface) instead of txpower (from
|
|
# wifi-device) if the latter does not exist
|
|
txpower=${txpower:-$vif_txpower}
|
|
[ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
|
|
|
|
eval "$nas_cmd"
|
|
}
|
|
|
|
|
|
detect_broadcom() {
|
|
local i=-1
|
|
|
|
while grep -qs "^ *wl$((++i)):" /proc/net/dev; do
|
|
local channel type
|
|
|
|
config_get type wl${i} type
|
|
[ "$type" = broadcom ] && continue
|
|
channel=`wlc ifname wl${i} channel`
|
|
|
|
uci -q batch <<-EOF
|
|
set wireless.wl${i}=wifi-device
|
|
set wireless.wl${i}.type=broadcom
|
|
set wireless.wl${i}.channel=${channel:-11}
|
|
set wireless.wl${i}.txantenna=3
|
|
set wireless.wl${i}.rxantenna=3
|
|
set wireless.wl${i}.disabled=1
|
|
|
|
set wireless.default_wl${i}=wifi-iface
|
|
set wireless.default_wl${i}.device=wl${i}
|
|
set wireless.default_wl${i}.network=lan
|
|
set wireless.default_wl${i}.mode=ap
|
|
set wireless.default_wl${i}.ssid=Lede${i#0}
|
|
set wireless.default_wl${i}.encryption=none
|
|
EOF
|
|
uci -q commit wireless
|
|
done
|
|
}
|