openwrtv4/target/linux/ramips/base-files/etc/diag.sh
Lazar Demin ab90f15c89 ramips: Added Onion Omega2 and Omega2+
This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io)

Specifications:
- SoC: MediaTek MT7688AN (580MHz, ramips)
- Omega2
  - RAM: 64MB DDR
  - Storage: 16MB NOR SPI flash onboard
- Omega2+
  - RAM: 128MB DDR
  - Storage: 32MB NOR SPI flash onboard + microSD slot
- Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter
- Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port
- Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock)
  - All Docks Provide:
    - Micro-USB port to provide power to the Omega
      - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial
    - USB 2.0 socket connected to Omega
  - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide:
    - Omega GPIO breakout
    - Allows for connection of Omega Expansions:
      - Ethernet Expansion
      - Relay Expansion
      - PWM Expansion
      - OLED Expansion
      - Ethernet Expansion
      - Proto Expansion
      - Cellular Expansion

Signed-off-by: Lazar Demin <lazar@onion.io>
2017-01-15 17:43:14 +01:00

269 lines
3.7 KiB
Bash

#!/bin/sh
# Copyright (C) 2010-2013 OpenWrt.org
. /lib/functions/leds.sh
. /lib/ramips.sh
get_status_led() {
board=$(ramips_board_name)
case $board in
3g150b|\
3g300m|\
w150m)
status_led="$board:blue:ap"
;;
3g-6200n|\
ar670w|\
ar725w|\
asl26555|\
br-6425|\
br-6475nd|\
c50|\
dch-m225|\
dir-860l-b1|\
e1700|\
fonera20n|\
kn_rc|\
kn_rf|\
kng_rc|\
mzk-750dhp|\
mzk-dp150n|\
mzk-w300nh2|\
nbg-419n|\
nbg-419n2|\
pwh2004|\
vr500|\
wnce2001|\
wndr3700v5|\
x5|\
x8|\
xdxrn502j)
status_led="$board:green:power"
;;
3g-6200nl)
status_led="$board:green:internet"
;;
a5-v11|\
cs-qr10|\
d105|\
dcs-930l-b1|\
ex2700|\
hlk-rm04|\
jhr-n825r|\
mpr-a1|\
mpr-a2|\
mzk-ex750np)
status_led="$board:red:power"
;;
ac1200pro|\
all0239-3g|\
dcs-930|\
dir-300-b1|\
dir-300-b7|\
dir-320-b1|\
dir-600-b1|\
dir-610-a1|\
dir-615-d|\
dir-615-h1|\
dir-620-a1|\
dir-620-d1|\
dwr-512-b|\
hpm|\
hw550-3g|\
mac1200rv2|\
miniembwifi|\
mofi3500-3gn|\
rut5xx|\
v11st-fe|\
vocore|\
wmr-300|\
zbt-wg2626|\
zbt-wg3526)
status_led="$board:green:status"
;;
ai-br100|\
ht-tm02)
status_led="$board:blue:wlan"
;;
atp-52b|\
ip2202)
status_led="$board:green:run"
;;
awapn2403|\
dir-645|\
sk-wb8|\
wrh-300cr)
status_led="$board:green:wps"
;;
cf-wr800n|\
psg1208)
status_led="$board:white:wps"
;;
psg1218)
status_led="$board:yellow:status"
;;
cy-swr1100|\
w502u)
status_led="$board:blue:wps"
;;
dap-1350|\
na930|\
pbr-m1|\
rt-n13u|\
rt-n14u|\
rt-n15|\
rt-n56u|\
wl-330n|\
wl-330n3g|\
wli-tx4-ag300n|\
wt3020|\
y1|\
y1s)
status_led="$board:blue:power"
;;
db-wrt01|\
esr-9753|\
pbr-d1)
status_led="$board:orange:power"
;;
f5d8235-v1)
status_led="$board:blue:wired"
;;
f5d8235-v2)
status_led="$board:blue:router"
;;
f7c027|\
timecloud)
status_led="$board:orange:status"
;;
hc5*61|\
jhr-n805r|\
jhr-n926r|\
mlw221|\
mlwg2)
status_led="$board:blue:system"
;;
linkits7688| \
linkits7688d)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
;;
m2m)
status_led="$board:blue:wifi"
;;
m3|\
m4|\
miwifi-nano)
status_led="$board:blue:status"
;;
miwifi-mini|\
zte-q7)
status_led="$board:red:status"
;;
mr-102n)
status_led="$board:amber:status"
;;
mr200)
status_led="$board:white:power"
;;
nw718)
status_led="$board:amber:cpu"
;;
newifi-d1)
status_led="$board:blue:status"
;;
omega2| \
omega2p)
status_led="$board:amber:system"
;;
oy-0001|\
sl-r7205|\
zbt-we826)
status_led="$board:green:wifi"
;;
psr-680w)
status_led="$board:red:wan"
;;
px-4885|\
re6500|\
whr-1166d|\
whr-600d|\
widora-neo)
status_led="$board:orange:wifi"
;;
mzk-ex300np|\
rt-n10-plus|\
tew-691gr|\
tew-692gr|\
ur-326n4g|\
ur-336un|\
wf-2881|\
wr512-3gn)
status_led="$board:green:wps"
;;
rb750gr3)
status_led="$board:blue:pwr"
;;
sap-g3200u3)
status_led="$board:green:usb"
;;
v22rw-2x2)
status_led="$board:green:security"
;;
vocore2)
status_led="$board:fuchsia:status"
;;
w306r-v20|\
witi|\
zbt-wr8305rt)
status_led="$board:green:sys"
;;
wcr-150gn|\
wl-351)
status_led="$board:amber:power"
;;
whr-g300n|\
wlr-6000)
status_led="$board:red:power"
;;
wzr-agl300nh)
status_led="$board:green:router"
;;
wizfi630a)
status_led="$board::run"
;;
whr-300hp2|\
wsr-1166|\
wsr-600)
status_led="$board:green:power"
;;
wrtnode2r | \
wrtnode2p | \
wrtnode)
status_led="wrtnode:blue:indicator"
;;
zbt-cpe102)
status_led="$board:green:4g-0"
;;
esac
}
set_state() {
get_status_led $1
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
upgrade | \
preinit_regular)
status_led_blink_preinit_regular
;;
done)
status_led_on
;;
esac
}