openwrtv4/target/linux/ramips/dts/NA930.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

174 lines
2.4 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Sercomm NA930";
chosen {
bootargs = "console=ttyS1,57600";
};
nand {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mtk,mt7620-nand";
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@200000 {
label = "factory";
reg = <0x200000 0x40000>;
read-only;
};
partition@240000 {
label = "Config";
reg = <0x240000 0x400000>;
read-only;
};
partition@640000 {
label = "firmware";
reg = <0x640000 0x1400000>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 11 1>;
linux,code = <KEY_RESTART>;
};
zwave {
label = "zwave";
gpios = <&gpio0 12 1>;
linux,code = <BTN_0>;
};
wps {
label = "wps";
gpios = <&gpio0 14 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
zwave {
label = "na930:blue:zwave";
gpios = <&gpio2 0 1>;
};
status {
label = "na930:blue:status";
gpios = <&gpio2 26 1>;
};
service {
label = "na930:blue:service";
gpios = <&gpio2 28 1>;
};
power {
label = "na930:blue:power";
gpios = <&gpio2 29 1>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
telit {
gpio-export,name = "telit";
gpio-export,output = <1>;
gpios = <&gpio0 13 0>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "rgmii2", "spi", "ephy";
ralink,function = "gpio";
};
uartf_gpio {
ralink,group = "uartf";
ralink,function = "gpio uartf";
};
};
};
&uart {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&ethernet {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
mediatek,portmap = "llllw";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4 = "gmac";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};