openwrtv4/package/firmware
Steven Lin 2b4ac79a79 ipq40xx: add support for EnGenius EAP1300
SOC:    IPQ4018 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB
NOR:    32 MiB
ETH:    Qualcomm Atheros QCA8072
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:  RESET Button
LEDS:   Power, LAN, MESH, WLAN 2.4GHz, WLAN 5GHz

1. Load Ramdisk via U-Boot

To set up the flash memory environment, do the following:
a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters:
   * 115200bps
   * 8N1
b. Confirm that the PC is connected to the board using one of the Ethernet ports. Set a static ip 192.168.99.8 for Ethernet that connects to board. The PC must have a TFTP server launched and listening on the interface to which the board is connected. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown.

U-BOOT> set serverip 192.168.99.8 && set ipaddr 192.168.99.9 && tftpboot 0x84000000 openwrt.itb && bootm

2. Load image via GUI

a. Upgrade EAP1300 to FW v3.5.3.2
In the GUI, System Manager > Firmware > Firmware Upgrade, to do upgrade.
b. Transfer to OpenWrt from EnGenius.
In Firmware Upgrade page, to upgrade yours openwrt-ipq40xx-engenius_eap1300-squashfs-sysupgrade.bin.

3. Revert to EnGenius EAP1300
To flash openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin by using sysupgrade command and "DO NOT" keep configuration.
$ sysupgrade –n openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin

Signed-off-by: Steven Lin <steven.lin@senao.com>
2018-12-05 09:40:32 +01:00
..
am33x-cm3 treewide: clean up and unify PKG_VERSION for git based downloads 2016-12-22 16:42:21 +01:00
amd64-microcode Revert "amd64-microcode: create early load microcode image" 2018-11-27 18:58:33 +01:00
ath10k-firmware ath10k-firmware: update board-2.bin for community firmwares 2018-11-01 17:16:52 +01:00
b43legacy-firmware treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
brcmfmac-board-rpi brcm2708: move wifi calibration EEPROMs out of base-files 2018-06-14 18:15:33 +02:00
intel-microcode Revert "intel-microcode: create early load microcode image" 2018-11-27 18:58:37 +01:00
ipq-wifi ipq40xx: add support for EnGenius EAP1300 2018-12-05 09:40:32 +01:00
ixp4xx-microcode treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
lantiq/dsl-vrx200-firmware-xdsl treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
layerscape layerscape: build ls-dpl package with linux dtc tool 2018-09-22 21:20:58 +02:00
linux-firmware linux-firmware: intel: Add iwl 9000 and 9260 firmware 2018-10-20 16:24:29 +02:00
prism54-firmware treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
vsc73x5-ucode treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
wireless-regdb wireless-regdb: fix PKG_MIRROR_HASH 2017-11-22 13:07:48 +01:00