Jo-Philipp Wich 23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. ... [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. SVN-Revision: 20722		2010-04-05 23:03:16 +00:00
..
adm6996.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
adm6996.h	Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a	2008-04-20 02:53:04 +00:00
ar8216.c	Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.	2010-04-05 23:03:16 +00:00
ar8216.h	Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.	2010-04-05 23:03:16 +00:00
ip175c.c	enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733)	2010-03-28 18:57:42 +00:00
mvswitch.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
mvswitch.h	add missing defines for mvswitch	2008-07-21 18:12:38 +00:00
rtl8306.c	rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly	2009-12-09 03:25:33 +00:00
rtl8366_smi.c	rtl8366_smi: sanitize gpio values to a 0/1 boolean	2010-01-30 15:25:12 +00:00
rtl8366_smi.h	rtl8366: make it available on all platforms	2010-01-25 15:13:38 +00:00
rtl8366rb.c	kernel: add driver for the RTL8366RB switch	2010-02-24 13:39:02 +00:00
rtl8366s.c	rtl8366s: reset the chip early, this allows ethernet to work as soon as possible	2010-01-27 21:01:48 +00:00
swconfig.c	swconfig: add a generic switch reset call	2009-04-28 19:16:17 +00:00