KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ath79/dts
History
David Bauer 6476148034 ath79: add support for OCEDO Raccoon 
This commit adds support for the OCEDO Raccoon

SOC:	Atheros AR9344
RAM:    128MB
FLASH:  16MiB
WLAN1:  AR9344 2.4 GHz 802.11bgn 2x2
WLAN2:  AR9382 5 GHz 802.11an 2x2
INPUT:  RESET button
LED:    Power, LAN, WiFi 2.4, WiFi 5
Serial: Header Next to Black metal shield
        Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

	NOTE: The U-Boot won't boot with the serial attached.
	Boot the device without serial attached and attach it
	after 3 seconds.

Tested and working:
 - Ethernet
 - 2.4 GHz WiFi
 - 5 GHz WiFi
 - TFTP boot from ramdisk image
 - Installation via ramdisk image
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Installation seems to be possible only through booting an OpenWRT
ramdisk image.

Hold down the reset button while powering on the device. It will load a
ramdisk image named 'raccoon-uImage-initramfs-lzma.bin' from 192.168.100.8.

Note: depending on the present software, the device might also try to
pull a file called 'raccoon-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.

Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.

Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with

 > fw_setenv bootcmd run bootcmd_1

Afterwards you can reboot the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-07-08 00:04:27 +02:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar7100.dtsi
ar7161_netgear_wndr3800.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7240.dtsi ath79: add AR7240 dtsi 2018-06-01 08:22:50 +02:00
ar7240_netgear_wnr612-v2.dts ath79: add Netgear WNR612 v2 2018-06-26 07:05:30 +02:00
ar7240_netgear_wnr612-v2.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7240_on_n150r.dts ath79: add support for ON Networks N150R 2018-06-26 07:05:44 +02:00
ar7240_tl-wr740n-v2.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7241.dtsi
ar7241_tl-mr3x20.dtsi ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-mr3220-v1.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-mr3420-v1.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-wr841-v7.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tp-link.dtsi ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_ubnt_bullet-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_nano-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_rocket-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_unifi.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7241_ubnt_xm.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242.dtsi
ar7242_avm_fritz300e.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242_tl-wr2543-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9132.dtsi ath79: correct wmac names in dts 2018-06-01 08:23:47 +02:00
ar9132_tl-wr1043nd-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9330.dtsi ath79: add pinmux to ar9330 2018-07-02 07:00:20 +02:00
ar9330_glinet_ar150.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9331_dpt_module.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_dragino_ms14.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_embeddedwireless_dorin.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_etactica-eg200.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_omega.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-mr10u.dts ath79: fixup TL-WR703N/TL-MR10U split 2018-06-16 10:08:51 +02:00
ar9331_tl-mr3020-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-wr703n.dts ath79: fixup TL-WR703N/TL-MR10U split 2018-06-16 10:08:51 +02:00
ar9331_tl-wr703n_tl-mr10u.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-wr740nd-v4.dts ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9331_tl-wr741nd-v4.dts ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9331_tl-wr741nd-v4.dtsi ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9341.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar9344.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar9344_ocedo_raccoon.dts ath79: add support for OCEDO Raccoon 2018-07-08 00:04:27 +02:00
ar9344_tl-wdr3600.dts ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) 2018-05-22 20:53:15 +02:00
ar9344_tl-wdr4300.dts ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) 2018-05-22 20:53:15 +02:00
ar9344_tl-wdr4300.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ath79.dtsi ath79: mdio: add address-cells and size-cells defaults 2018-06-08 09:56:27 +02:00
qca956x.dtsi ath79: qca95xx: add new intc2, correct intc3 and add second pcie on qca9557 2018-06-20 11:12:00 +02:00
qca9533.dtsi ath79: initial gl-ar300m support 2018-06-18 20:29:38 +02:00
qca9533_glinet_ar300m.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9533_glinet_ar300m_nand.dts ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
qca9533_glinet_ar300m_nor.dts ath79: initial gl-ar300m support 2018-06-18 20:29:38 +02:00
qca9557.dtsi ath79: qca95xx: add new intc2, correct intc3 and add second pcie on qca9557 2018-06-20 11:12:00 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9558_tl-archer-c7-v2.dts ath79: add support for TP-Link Archer c7 v2 2018-06-26 08:57:26 +02:00
qca9558_tl-archer-c7.dtsi ath79: swap TP-Link Archer C7 v2 USB port LED and GPIO names 2018-07-04 01:20:03 +02:00
qca9558_tl-wr1043nd-v2.dts ath79: add support for tl-wr1043nd v2/v3 2018-06-18 20:29:38 +02:00
qca9558_tl-wr1043nd-v3.dts ath79: add support for tl-wr1043nd v2/v3 2018-06-18 20:29:38 +02:00
qca9558_tl-wr1043nd.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9563_phicomm-k2t.dts ath79: add support for Phicomm K2T 2018-06-18 18:21:16 +02:00
qca9563_tl-re450-v2.dts ath79: add support for TP-Link RE450 v2 2018-07-02 07:05:33 +02:00
qca9563_tl-wr1043n.dtsi ath79: small wr1043nd-v4 fixes 2018-06-28 20:31:03 +02:00
qca9563_tl-wr1043nd-v4.dts ath79: small wr1043nd-v4 fixes 2018-06-28 20:31:03 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: remove bs-partition ro-flag for UniFi AC devices 2018-07-04 01:20:03 +02:00