openwrtv4/target/linux/ramips/image/mt7621.mk
Felix Fietkau 201dbb9fe8 ramips: fix build error in ubnt-erx initramfs factory image
Build initramfs kernel image, but skip factory image if initramfs size
is too big.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-06 10:12:37 +02:00

182 lines
5.3 KiB
Makefile

#
# MT7621 Profiles
#
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
mv $@.seama $@
endef
define Build/seama-seal
$(call Build/seama,-s $@.seama $(1))
endef
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:6' > $(1).compat; \
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
\
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
md5sum --binary $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) | awk '{print $$1}'> $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
\
echo "dummy" > $(1).rootfs; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
\
md5sum --binary $(1).rootfs | awk '{print $$1}'> $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
\
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
\
$(CP) $(1) $(BIN_DIR)/; \
else \
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
fi
endef
define Device/mt7621
DTS := MT7621
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := MediaTek MT7621 EVB
endef
TARGET_DEVICES += mt7621
define Device/wsr-600
DTS := WSR-600
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Buffalo WSR-600
endef
TARGET_DEVICES += wsr-600
define Device/re6500
DTS := RE6500
DEVICE_TITLE := Linksys RE6500
endef
TARGET_DEVICES += re6500
define Device/wsr-1166
DTS := WSR-1166
IMAGE/sysupgrade.bin := trx | pad-rootfs
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Buffalo WSR-1166
endef
TARGET_DEVICES += wsr-1166
define Device/dir-860l-b1
DTS := DIR-860L-B1
IMAGES += factory.bin
KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGE/sysupgrade.bin := \
append-kernel | pad-offset 65536 64 | append-rootfs | \
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := \
append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
check-size $$$$(IMAGE_SIZE)
DEVICE_TITLE := D-Link DIR-860L B1
endef
TARGET_DEVICES += dir-860l-b1
define Device/firewrt
DTS := FIREWRT
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Firefly FireWRT
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev
endef
TARGET_DEVICES += firewrt
define Device/pbr-m1
DTS := PBR-M1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := PBR-M1
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
kmod-rtc-pcf8563 kmod-i2c-mt7621
endef
TARGET_DEVICES += pbr-m1
define Device/sap-g3200u3
DTS := SAP-G3200U3
DEVICE_TITLE := STORYLiNK SAP-G3200U3
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev
endef
TARGET_DEVICES += sap-g3200u3
define Device/witi
DTS := WITI
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := MQmaker WiTi
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
kmod-rtc-pcf8563 kmod-i2c-mt7621
endef
TARGET_DEVICES += witi
define Device/wndr3700v5
DTS := WNDR3700V5
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Netgear WNDR3700v5
DEVICE_PACKAGES := kmod-usb3
endef
TARGET_DEVICES += wndr3700v5
define Device/zbt-wg2626
DTS := ZBT-WG2626
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := ZBT WG2626
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
endef
TARGET_DEVICES += zbt-wg2626
define Device/zbt-wg3526
DTS := ZBT-WG3526
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := ZBT WG3526
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
endef
TARGET_DEVICES += zbt-wg3526
define Device/wf-2881
DTS := WF-2881
BLOCKSIZE := 128KiB
PAGESIZE := 2048
FILESYSTEMS := squashfs
IMAGE_SIZE := 132382720
KERNEL := $(KERNEL_DTB) | pad-offset 131072 64 | uImage lzma
IMAGE/sysupgrade.bin := append-kernel | append-ubi | check-size $$$$(IMAGE_SIZE)
DEVICE_TITLE := NETIS WF-2881
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev
endef
TARGET_DEVICES += wf-2881
define Device/ubnt-erx
DTS := UBNT-ERX
FILESYSTEMS := squashfs
KERNEL_SIZE := 3145728
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGES := sysupgrade.tar
KERNEL_INITRAMFS := $$(KERNEL) | ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
IMAGE/sysupgrade.tar := sysupgrade-nand
DEVICE_TITLE := Ubiquiti EdgeRouter X
DEVICE_PACKAGES := -kmod-mt76 -kmod-rt2800-pci -kmod-cfg80211 -wpad-mini -iwinfo
endef
TARGET_DEVICES += ubnt-erx
define Device/sk-wb8
DTS := SK-WB8
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := SamKnows Whitebox 8
DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev uboot-envtools
endef
TARGET_DEVICES += sk-wb8
# FIXME: is this still needed?
define Image/Prepare
#define Build/Compile
rm -rf $(KDIR)/relocate
$(CP) ../../generic/image/relocate $(KDIR)
$(MAKE) -C $(KDIR)/relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
$(CP) $(KDIR)/relocate/loader.bin $(KDIR)/loader.bin
endef