No description
Find a file
Mirko Vogt 1f489e4084 re-enable shallow git clones ('--depth 1')
SVN-Revision: 31469
2012-04-24 18:19:16 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include enable verbose output of kernel build if V=99 is passed 2012-04-24 12:42:57 +00:00
package kernel: add some more missing kernel config symbols 2012-04-24 09:25:32 +00:00
scripts re-enable shallow git clones ('--depth 1') 2012-04-24 18:19:16 +00:00
target bcm63xx: drop linux 3.2 support 2012-04-24 11:49:27 +00:00
toolchain remove screwed up patch for gcc 4.7-linaro which got committed by accident 2012-04-21 10:23:49 +00:00
tools tools: add xz dependency to automake 2012-04-21 16:09:04 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make xz ramdisk images also available for 2.6.39+ 2012-04-18 15:14:05 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk Use build suffix on build_dir paths 2012-04-10 10:55:55 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org