KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
Hauke Mehrtens 5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
2011-12-19 23:39:13 +00:00

291 lines
7.1 KiB
Diff
Raw Blame History

From b39adeae5b06e40699c174ed78ca7c45b8d7976f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 26 Nov 2011 21:20:54 +0100
Subject: [PATCH 17/21] USB: OHCI: Add a generic platform device driver
This adds a generic driver for platform devices. It works like the PCI
driver and is based on it. This is for devices which do not have an own
bus but their OHCI controller works like a PCI controller. It will be
used for the Broadcom bcma and ssb USB OHCI controller.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/usb/host/Kconfig | 10 ++
drivers/usb/host/ohci-hcd.c | 21 ++++-
drivers/usb/host/ohci-platform.c | 197 ++++++++++++++++++++++++++++++++++++++
3 files changed, 227 insertions(+), 1 deletions(-)
create mode 100644 drivers/usb/host/ohci-platform.c
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
Enable support for the CNS3XXX SOC's on-chip OHCI controller.
It is needed for low-speed USB 1.0 device support.
+config USB_OHCI_HCD_PLATFORM
+ bool "OHCI driver for a platform device"
+ depends on USB_OHCI_HCD && EXPERIMENTAL
+ default n
+ ---help---
+ Adds an OHCI host driver for a generic platform device, which
+ provieds a memory space and an irq.
+
+ If unsure, say N.
+
config USB_OHCI_BIG_ENDIAN_DESC
bool
depends on USB_OHCI_HCD
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_ath79_driver
#endif
+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
+#include "ohci-platform.c"
+#define PLATFORM_OHCI_DRIVER ohci_platform_driver
+#endif
+
#if !defined(PCI_DRIVER) && \
!defined(PLATFORM_DRIVER) && \
!defined(OMAP1_PLATFORM_DRIVER) && \
@@ -1123,7 +1128,8 @@ MODULE_LICENSE ("GPL");
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(SM501_OHCI_DRIVER) && \
!defined(TMIO_OHCI_DRIVER) && \
- !defined(SSB_OHCI_DRIVER)
+ !defined(SSB_OHCI_DRIVER) && \
+ !defined(PLATFORM_OHCI_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
@@ -1207,9 +1213,19 @@ static int __init ohci_hcd_mod_init(void
goto error_tmio;
#endif
+#ifdef PLATFORM_OHCI_DRIVER
+ retval = platform_driver_register(&PLATFORM_OHCI_DRIVER);
+ if (retval)
+ goto error_platform;
+#endif
+
return retval;
/* Error path */
+#ifdef PLATFORM_OHCI_DRIVER
+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
+ error_platform:
+#endif
#ifdef TMIO_OHCI_DRIVER
platform_driver_unregister(&TMIO_OHCI_DRIVER);
error_tmio:
@@ -1263,6 +1279,9 @@ module_init(ohci_hcd_mod_init);
static void __exit ohci_hcd_mod_exit(void)
{
+#ifdef PLATFORM_OHCI_DRIVER
+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
+#endif
#ifdef TMIO_OHCI_DRIVER
platform_driver_unregister(&TMIO_OHCI_DRIVER);
#endif
--- /dev/null
+++ b/drivers/usb/host/ohci-platform.c
@@ -0,0 +1,197 @@
+/*
+ * Generic platform ohci driver
+ *
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/platform_device.h>
+
+static int ohci_platform_reset(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int err;
+
+ ohci_hcd_init(ohci);
+ err = ohci_init(ohci);
+
+ return err;
+}
+
+static int ohci_platform_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int err;
+
+ err = ohci_run(ohci);
+ if (err < 0) {
+ ohci_err(ohci, "can't start\n");
+ ohci_stop(hcd);
+ }
+
+ return err;
+}
+
+static const struct hc_driver ohci_platform_hc_driver = {
+ .description = "platform-usb-ohci",
+ .product_desc = "Generic Platform OHCI Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+
+ .reset = ohci_platform_reset,
+ .start = ohci_platform_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ .get_frame_number = ohci_get_frame,
+
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int ohci_platform_attach(struct platform_device *dev)
+{
+ struct usb_hcd *hcd;
+ struct resource *res_irq, *res_mem;
+ int err = -ENOMEM;
+
+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+ dev_name(&dev->dev));
+ if (!hcd)
+ goto err_return;
+
+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+ if (!res_irq) {
+ err = -ENXIO;
+ goto err_return;
+ }
+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res_mem) {
+ err = -ENXIO;
+ goto err_return;
+ }
+ hcd->rsrc_start = res_mem->start;
+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
+
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs)
+ goto err_put_hcd;
+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
+ if (err)
+ goto err_iounmap;
+
+ platform_set_drvdata(dev, hcd);
+
+ return err;
+
+err_iounmap:
+ iounmap(hcd->regs);
+err_put_hcd:
+ usb_put_hcd(hcd);
+err_return:
+ return err;
+}
+
+static int ohci_platform_probe(struct platform_device *dev)
+{
+ int err;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ /* We currently always attach BCMA_DEV_USB11_HOSTDEV
+ * as HOST OHCI. If we want to attach it as Client device,
+ * we must branch here and call into the (yet to
+ * be written) Client mode driver. Same for remove(). */
+
+ err = ohci_platform_attach(dev);
+
+ return err;
+}
+
+static int ohci_platform_remove(struct platform_device *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = platform_get_drvdata(dev);
+ if (!hcd)
+ return -ENODEV;
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+static void ohci_platform_shutdown(struct platform_device *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = platform_get_drvdata(dev);
+ if (!hcd)
+ return;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+
+#ifdef CONFIG_PM
+
+static int ohci_platform_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+
+ return 0;
+}
+
+static int ohci_platform_resume(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+ ohci_finish_controller_resume(hcd);
+ return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ohci_platform_suspend NULL
+#define ohci_platform_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct platform_device_id ohci_platform_table[] = {
+ { "ohci-platform", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, ohci_platform_table);
+
+static struct platform_driver ohci_platform_driver = {
+ .id_table = ohci_platform_table,
+ .probe = ohci_platform_probe,
+ .remove = ohci_platform_remove,
+ .shutdown = ohci_platform_shutdown,
+ .suspend = ohci_platform_suspend,
+ .resume = ohci_platform_resume,
+ .driver = {
+ .name = "ohci-platform",
+ }
+};
Reference in a new issue View git blame Copy permalink