openwrtv4/target/linux/generic/files/drivers/net/phy
Mirko Parthey 1dace8cbe0 brcm47xx: resolve GPIO conflict for WRT54GSv1
On the Linksys WRT54GSv1, the adm6996 switch driver and the
gpio_button_hotplug module both claim GPIO 6, which is connected to the
Reset button.  When the switch driver's request wins, the Reset button
cannot work. This makes it impossible to enter failsafe mode without a
serial console.

Stop requesting the "adm_rc" GPIO in the switch driver, since it is not
used anywhere.

Fixes FS#792.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
2017-07-02 22:44:06 +02:00
..
b53 b53: allow configuration through device tree 2017-06-10 12:40:38 +02:00
adm6996.c brcm47xx: resolve GPIO conflict for WRT54GSv1 2017-07-02 22:44:06 +02:00
adm6996.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
ar8216.c ar8216: flush ARL table during reset after init_globals 2017-02-16 17:17:05 +01:00
ar8216.h net: ar8327: modify some configuration of switch 2016-12-01 15:47:43 +01:00
ar8327.c ar8327: Add workarounds for AR8337 switch. 2017-03-30 09:48:52 +02:00
ar8327.h ar8327: Add workarounds for AR8337 switch. 2017-03-30 09:48:52 +02:00
ip17xx.c ip17xx: correct aneg_done return value 2017-06-07 11:06:29 +02:00
mvsw61xx.c mvsw61xx: add support for MV88E6352 2017-01-13 17:12:40 +01:00
mvsw61xx.h mvsw61xx: add support for MV88E6352 2017-01-13 17:12:40 +01:00
mvswitch.c mvswitch: fix autonegotiation issue 2017-06-07 11:06:12 +02:00
mvswitch.h treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
psb6970.c kernel: update phy drivers for 4.9 2017-02-03 12:35:44 +01:00
rtl8306.c kernel: update phy drivers for 4.9 2017-02-03 12:35:44 +01:00
rtl8366_smi.c rtl8366_smi: add linux 4.4 compatibility 2017-02-01 17:49:54 +01:00
rtl8366_smi.h linux: generic: rtl836*: fix compilation with !CONFIG_OF 2012-12-15 13:32:02 +00:00
rtl8366rb.c generic: rtl8366rb: add support for initvals from DTS 2017-04-25 19:29:59 +02:00
rtl8366s.c generic: rtl836x: add support for Green Feature 2017-01-27 11:10:10 +01:00
rtl8367.c kernel: rtl8367(b): fix build error 2016-11-19 17:57:04 +01:00
rtl8367b.c kernel: rtl8367(b): fix build error 2016-11-19 17:57:04 +01:00
swconfig.c linux/swconfig_get_attr: fix leak of msg in case of error 2017-06-11 14:22:44 +02:00
swconfig_leds.c switch: allow Ethernet port LEDs to show specific port speeds only 2016-02-25 13:31:26 +00:00