1f4124ceb0
Based on the ltq-hcd driver the AR9 USB can be initialized the same way as the VR9 platform. Use the same initialization bits for both platforms. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> SVN-Revision: 46913
97 lines
2.8 KiB
Diff
97 lines
2.8 KiB
Diff
--- a/arch/mips/lantiq/xway/reset.c
|
|
+++ b/arch/mips/lantiq/xway/reset.c
|
|
@@ -44,6 +44,37 @@
|
|
#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7)
|
|
#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10))
|
|
|
|
+/* dwc2 USB configuration registers */
|
|
+#define RCU_USB1CFG 0x0018
|
|
+#define RCU_USB2CFG 0x0034
|
|
+
|
|
+/* USB DMA endianness bits */
|
|
+#define RCU_USBCFG_HDSEL_BIT BIT(11)
|
|
+#define RCU_USBCFG_HOST_END_BIT BIT(10)
|
|
+#define RCU_USBCFG_SLV_END_BIT BIT(9)
|
|
+
|
|
+/* USB reset bits */
|
|
+#define RCU_USBRESET 0x0010
|
|
+
|
|
+#define USBRESET_BIT BIT(4)
|
|
+
|
|
+#define RCU_USBRESET2 0x0048
|
|
+
|
|
+#define USB1RESET_BIT BIT(4)
|
|
+#define USB2RESET_BIT BIT(5)
|
|
+
|
|
+#define RCU_CFG1A 0x0038
|
|
+#define RCU_CFG1B 0x003C
|
|
+
|
|
+/* USB PMU devices */
|
|
+#define PMU_AHBM BIT(15)
|
|
+#define PMU_USB0 BIT(6)
|
|
+#define PMU_USB1 BIT(27)
|
|
+
|
|
+/* USB PHY PMU devices */
|
|
+#define PMU_USB0_P BIT(0)
|
|
+#define PMU_USB1_P BIT(26)
|
|
+
|
|
/* remapped base addr of the reset control unit */
|
|
static void __iomem *ltq_rcu_membase;
|
|
static struct device_node *ltq_rcu_np;
|
|
@@ -200,6 +231,45 @@ static void ltq_machine_power_off(void)
|
|
unreachable();
|
|
}
|
|
|
|
+static void ltq_usb_init(void)
|
|
+{
|
|
+ /* Power for USB cores 1 & 2 */
|
|
+ ltq_pmu_enable(PMU_AHBM);
|
|
+ ltq_pmu_enable(PMU_USB0);
|
|
+ ltq_pmu_enable(PMU_USB1);
|
|
+
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
|
|
+
|
|
+ /* Enable USB PHY power for cores 1 & 2 */
|
|
+ ltq_pmu_enable(PMU_USB0_P);
|
|
+ ltq_pmu_enable(PMU_USB1_P);
|
|
+
|
|
+ /* Configure cores to host mode */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB1CFG);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB2CFG);
|
|
+
|
|
+ /* Select DMA endianness (Host-endian: big-endian) */
|
|
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
|
|
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
|
|
+
|
|
+ /* Hard reset USB state machines */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
|
|
+ udelay(50 * 1000);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
|
|
+
|
|
+ /* Soft reset USB state machines */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
|
|
+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
|
|
+ udelay(50 * 1000);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
|
|
+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
|
|
+}
|
|
+
|
|
static int __init mips_reboot_setup(void)
|
|
{
|
|
struct resource res;
|
|
@@ -223,6 +293,10 @@ static int __init mips_reboot_setup(void
|
|
if (!ltq_rcu_membase)
|
|
panic("Failed to remap core memory");
|
|
|
|
+ if (of_machine_is_compatible("lantiq,ar9") ||
|
|
+ of_machine_is_compatible("lantiq,vr9"))
|
|
+ ltq_usb_init();
|
|
+
|
|
_machine_restart = ltq_machine_restart;
|
|
_machine_halt = ltq_machine_halt;
|
|
pm_power_off = ltq_machine_power_off;
|