| .. |
|
020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
021-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch
|
bcm53xx: use backported BCM5301X patches from stblinux soc/next
|
2015-12-03 10:18:57 +00:00 |
|
022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
030-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
|
bcm53xx: use backported BCM5301X patches from stblinux devicetree/next
|
2015-12-03 10:19:16 +00:00 |
|
031-ARM-dts-enable-clock-support-for-BCM5301X.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
032-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
|
bcm53xx: move BCM5301X patches to use 08x prefix
|
2015-12-03 11:03:07 +00:00 |
|
033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
|
bcm53xx: backport BCM5301X earlycon and USB VCC patches
|
2016-04-14 05:54:20 +00:00 |
|
035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch
|
bcm53xx: backport BCM5301X earlycon and USB VCC patches
|
2016-04-14 05:54:20 +00:00 |
|
036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch
|
bcm53xx: backport BCM5301X earlycon and USB VCC patches
|
2016-04-14 05:54:20 +00:00 |
|
037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch
|
bcm53xx: backport BCM5301X patches for SRAB
|
2016-06-20 23:07:31 +02:00 |
|
037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch
|
bcm53xx: backport BCM5301X patches for SRAB
|
2016-06-20 23:07:31 +02:00 |
|
038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch
|
bcm53xx: backport BCM5301X patches for SRAB
|
2016-06-20 23:07:31 +02:00 |
|
038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch
|
bcm53xx: backport BCM5301X patches for SRAB
|
2016-06-20 23:07:31 +02:00 |
|
038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch
|
bcm53xx: backport BCM5301X patches for SRAB
|
2016-06-20 23:07:31 +02:00 |
|
039-ARM-dts-BCM5301x-Add-RNG-Device-Tree-node.patch
|
bcm53xx: backport BCM5301x patches from 2016-07-06
|
2016-07-07 13:54:55 +02:00 |
|
040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch
|
bcm53xx: backport BCM5301x patches from 2016-07-06
|
2016-07-07 13:54:55 +02:00 |
|
041-0001-ARM-BCM5301X-Specify-NAND-chip-select-and-ECC-in-sep.patch
|
bcm53xx: backport BCM5301x patches from 2016-07-06
|
2016-07-07 13:54:55 +02:00 |
|
041-0002-ARM-BCM5301X-Fix-NAND-ECC-parameters-for-D-Link-DIR-.patch
|
bcm53xx: backport BCM5301x patches from 2016-07-06
|
2016-07-07 13:54:55 +02:00 |
|
042-ARM-BCM5301X-Specify-PHY-of-USB-2.0-in-DT.patch
|
bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9
|
2016-07-28 12:59:23 +02:00 |
|
043-0001-ARM-BCM53573-Initial-support-for-Broadcom-BCM53573-S.patch
|
bcm53xx: backport patch adding ARCH_BCM_53573 symbol
|
2016-08-23 07:13:07 +02:00 |
|
044-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
|
bcm53xx: use upstream queued patches for R8500 and AC9
|
2016-09-08 22:53:37 +02:00 |
|
044-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch
|
bcm53xx: use upstream queued patches for R8500 and AC9
|
2016-09-08 22:53:37 +02:00 |
|
044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
|
bcm53xx: backport BCM5301X patches from 2019-09-30
|
2016-09-30 23:39:28 +02:00 |
|
044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
|
bcm53xx: backport BCM5301X patches from 2019-09-30
|
2016-09-30 23:39:28 +02:00 |
|
044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
|
bcm53xx: backport BCM5301X patches from 2019-09-30
|
2016-09-30 23:39:28 +02:00 |
|
044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
|
bcm53xx: backport BCM5301X patches from 2019-09-30
|
2016-09-30 23:39:28 +02:00 |
|
044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
|
bcm53xx: backport BCM5301X patches from 2019-09-30
|
2016-09-30 23:39:28 +02:00 |
|
044-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch
|
bcm53xx: backport missed BCM53573 ILP patch from 4.10
|
2016-12-13 09:26:27 +01:00 |
|
044-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch
|
bcm53xx: backport missed BCM53573 ILP patch from 4.10
|
2016-12-13 09:26:27 +01:00 |
|
045-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
|
bcm53xx: use upstream accepted fix for ARM core aborts
|
2016-11-28 13:14:14 +01:00 |
|
046-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch
|
bcm53xx: backport DTS patches accepted for 4.11
|
2016-12-13 07:52:57 +01:00 |
|
046-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch
|
bcm53xx: backport DTS patches accepted for 4.11
|
2016-12-13 07:52:57 +01:00 |
|
046-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch
|
bcm53xx: backport DTS patches accepted for 4.11
|
2016-12-13 07:52:57 +01:00 |
|
046-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch
|
bcm53xx: backport DTS patches accepted for 4.11
|
2016-12-13 07:52:57 +01:00 |
|
046-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch
|
bcm53xx: backport DTS patches accepted for 4.11
|
2016-12-13 07:52:57 +01:00 |
|
046-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch
|
bcm53xx: backport DTS patches accepted for 4.11
|
2016-12-13 07:52:57 +01:00 |
|
046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
|
bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
|
2017-01-18 07:49:52 +01:00 |
|
046-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch
|
bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
|
2017-01-18 07:49:52 +01:00 |
|
046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
|
bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
|
2017-01-18 07:49:52 +01:00 |
|
047-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch
|
bcm53xx: backport accepted BCM5301X and BCM53573 patches
|
2017-02-28 22:52:46 +01:00 |
|
047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch
|
bcm53xx: backport DT patches for serial, thermal and MDIO
|
2017-04-20 22:45:05 +02:00 |
|
047-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch
|
bcm53xx: backport DT patches for serial, thermal and MDIO
|
2017-04-20 22:45:05 +02:00 |
|
047-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch
|
bcm53xx: backport DT patches for serial, thermal and MDIO
|
2017-04-20 22:45:05 +02:00 |
|
047-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch
|
bcm53xx: backport DT patches for serial, thermal and MDIO
|
2017-04-20 22:45:05 +02:00 |
|
060-0001-net-phy-Initialize-mdio-clock-at-probe-function.patch
|
bcm53xx: backport MDIO bus clock initialization fix
|
2017-05-11 16:04:23 +02:00 |
|
070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch
|
bcm53xx: rename PHY patches to use 07* prefix
|
2016-08-14 11:22:58 +02:00 |
|
070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch
|
bcm53xx: rename PHY patches to use 07* prefix
|
2016-08-14 11:22:58 +02:00 |
|
071-0001-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch
|
bcm53xx: backport USB 3.0 PHY patch cleaning all writes
|
2017-05-11 16:04:23 +02:00 |
|
071-0002-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch
|
bcm53xx: backport USB 3.0 PHY patch cleaning all writes
|
2017-05-11 16:04:23 +02:00 |
|
080-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch
|
kernel: refresh patches for kernel 4.4
|
2016-01-12 20:50:41 +00:00 |
|
081-0001-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
|
bcm53xx: use two upstream USB bcma patches
|
2016-01-28 07:01:09 +00:00 |
|
081-0002-USB-bcma-separate-code-initializing-USB-2.0-core.patch
|
bcm53xx: use two upstream USB bcma patches
|
2016-01-28 07:01:09 +00:00 |
|
081-0003-USB-bcma-use-simpler-devm-helper-for-getting-vcc-GPI.patch
|
bcm53xx: use upstream fix simplifying USB power GPIO usage
|
2016-07-07 15:07:02 +02:00 |
|
082-0001-USB-bcma-initialize-Northstar-USB-3.0-controller.patch
|
bcm53xx: backport USB 3.0 controller init patch
|
2016-08-14 12:41:32 +02:00 |
|
082-0002-USB-bcma-support-old-USB-2.0-controller-on-Northstar.patch
|
bcm53xx: move BCM53573 USB 2.0 patch to use backports prefix
|
2016-09-21 14:20:20 +02:00 |
|
082-0003-USB-bcma-drop-Northstar-PHY-2.0-initialization-code.patch
|
bcm53xx: switch to standalone USB 2.0 PHY driver
|
2016-10-01 16:52:08 +02:00 |
|
083-0001-spi-bcm-qspi-Add-Broadcom-MSPI-driver.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0002-spi-brcmstb-qspi-Broadcom-settop-platform-driver.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0003-spi-bcm-qspi-Add-BSPI-spi-nor-flash-controller-drive.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0004-spi-bcm-qspi-don-t-include-linux-mtd-cfi.h.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0005-spi-bcm-qspi-fix-suspend-resume-ifdef.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0006-spi-bcm-qspi-Fix-return-value-check-in-bcm_qspi_prob.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0007-spi-bcm-qspi-Fix-error-return-code-in-bcm_qspi_probe.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
083-0008-spi-iproc-qspi-Add-Broadcom-iProc-SoCs-support.patch
|
bcm53xx: backport Broadcom's iProc QSPI driver
|
2017-03-01 07:02:17 +01:00 |
|
084-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch
|
bcm53xx: backport upstream bcm53xx spi driver changes
|
2017-01-11 15:33:47 +01:00 |
|
084-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch
|
bcm53xx: backport upstream bcm53xx spi driver changes
|
2017-01-11 15:33:47 +01:00 |
|
085-PCI-iproc-Hide-CONFIG_PCIE_IPROC.patch
|
bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
|
2016-01-19 21:53:23 +00:00 |
|
086-PCI-iproc-Do-not-use-0x-in-front-of-pap.patch
|
bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
|
2016-01-19 21:53:23 +00:00 |
|
087-0001-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch
|
bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
|
2016-01-19 21:53:23 +00:00 |
|
087-0002-PCI-iproc-Add-PAXC-interface-support.patch
|
bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
|
2016-01-19 21:53:23 +00:00 |
|
087-0003-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch
|
bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
|
2016-01-19 21:53:23 +00:00 |
|
087-0004-PCI-iproc-Add-iProc-PCIe-MSI-support.patch
|
bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
|
2016-01-19 21:53:23 +00:00 |
|
088-PCI-iproc-Allow-multiple-devices-except-on-PAXC.patch
|
kernel: update kernel 4.4 to version 4.4.7
|
2016-04-16 21:05:48 +00:00 |
|
089-clk-bcm-Add-driver-for-BCM53573-ILP-clock.patch
|
bcm53xx: use upstream accepted ILP clk driver for BCM53573
|
2016-09-17 21:43:29 +02:00 |
|
101-use-part-parser.patch
|
bcm53xx: backport BCM5301x patches from 2016-07-06
|
2016-07-07 13:54:55 +02:00 |
|
112-bcm53xx-sprom-add-sprom-driver.patch
|
bcm53xx: use SPROM driver queued for 4.6
|
2016-03-06 18:08:03 +00:00 |
|
140-mtd-brcmnand-set-initial-ECC-params-based-on-info-fr.patch
|
kernel: update kernel 4.4 to version 4.4.9
|
2016-05-10 10:43:17 +02:00 |
|
180-usb-xhci-add-support-for-performing-fake-doorbell.patch
|
kernel: update 4.4 kernel to 4.4.42
|
2017-01-13 23:05:36 +01:00 |
|
300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
|
bcm53xx: update copy of ASM entry flushing whole D-cache
|
2016-08-19 12:47:58 +02:00 |
|
301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
|
bcm53xx: backport BCM5301X patches
|
2017-03-18 18:32:53 +01:00 |
|
400-mtd-brcmnand-stop-special-treating-ECC-strength-1-as.patch
|
kernel: update kernel 4.4 to version 4.4.9
|
2016-05-10 10:43:17 +02:00 |
|
405-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
|
generic: mtd: backport SPI_NOR_HAS_LOCK
|
2017-01-03 19:58:00 +01:00 |
|
406-mtd-m25p80-use-single-SPI-message-for-writing-data.patch
|
bcm53xx: fix warning caused by m25p80 patch
|
2016-08-16 17:14:14 +02:00 |
|
500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
|
kernel: update kernel 4.4 to version 4.4.12
|
2016-06-02 15:34:34 +02:00 |
|
710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
|
bcm53xx: enable switch port 5 on Tenda AC9
|
2016-09-08 23:24:43 +02:00 |
|
901-mtd-bcm47xxpart-add-device-specific-workarounds.patch
|
kernel: update bcm47xxpart failsafe partition patches
|
2017-01-11 09:54:47 +01:00 |
|
905-BCM53573-minor-hacks.patch
|
bcm53xx: backport DT patches for serial, thermal and MDIO
|
2017-04-20 22:45:05 +02:00 |
