openwrtv4/target/linux/ath79/image/tiny.mk
INAGAKI Hiroshi 9e6f22e309 ath79: add support for Buffalo WHR-G301N
Buffalo WHR-G301N is a 2.4 GHz 11n router, based on Atheros AR7240.
Ported from ar71xx target.

Specification:

- Atheros AR7240
- 32 MB of RAM
- 4 MB of Flash
- 2.4 GHz 2T2R wifi
- 5x 10/100 Mbps Ethernet
- 9x LEDs, 4x keys
  - LED: 8x gpio-leds, 1x ath9k-leds
  - key: 2x buttons, 1x slide switch
- UART header on PCB
  - Vcc, GND, TX, RX from LEDs side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port of WHR-G301N
2. Connect power cable to WHR-G301N and turn on it
3. Access to "http://192.168.11.1/" and open firmware update page
("ファーム更新")
4. Select the OpenWrt factory image and click execute ("実行") button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[fix the SUPPORTED_DEVICES to be compatible with the ar71xx image]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-16 21:20:57 +02:00

49 lines
1.5 KiB
Makefile

DEVICE_VARS += ROOTFS_SIZE
define Build/buffalo-tftp-header
( \
echo -n -e "# Airstation Public Fmt1" | dd bs=32 count=1 conv=sync; \
dd if=$@; \
) > $@.new
mv $@.new $@
endef
define Build/buffalo-tag
$(eval product=$(word 1,$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-tag \
-c 0x80041000 -d 0x801e8000 -w 3 \
-a ath -v 1.99 -m 1.01 -f 1 \
-b $(product) -p $(product) \
-r M_ -l mlang8 \
-i $@ -o $@.new
mv $@.new $@
endef
define Device/buffalo_bhr-4grv2
ATH_SOC := qca9558
DEVICE_TITLE := Buffalo BHR-4GRV2
BOARDNAME := BHR-4GRV2
ROOTFS_SIZE := 14528k
KERNEL_SIZE := 1472k
IMAGE_SIZE := 16000k
IMAGES += factory.bin
IMAGE/sysupgrade.bin := \
append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | \
append-kernel | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-kernel | \
pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
SUPPORTED_DEVICES += bhr-4grv2
endef
TARGET_DEVICES += buffalo_bhr-4grv2
define Device/buffalo_whr-g301n
ATH_SOC := ar7240
DEVICE_TITLE := Buffalo WHR-G301N
IMAGE_SIZE := 3712k
IMAGES += factory.bin tftp.bin
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WHR-G301N 1.99 | buffalo-tag WHR-G301N
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += whr-g301n
endef
TARGET_DEVICES += buffalo_whr-g301n