openwrtv4/target/linux/ramips/base-files/etc/board.d/01_leds
Thibaut VARENE 1780d40f2b ramips: cleanup EX2700 and WN3000RPv3 LEDs
This patch cleans up the WN3000RPv3 and EX2700 setup, bringing it in line
with other similar devices:

The power led is a bicolor one. The bootloader brings the red side on at
powerup.

Instead of blinking the red side in diag.sh and need to forcefully turn it off
in 01_leds, this patch simplifies the setup by relying on the default off state
of the gpio-led driver for the red side and blinking the green side as with
other devices.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-08-03 00:11:25 +02:00

445 lines
12 KiB
Bash

#!/bin/sh
. /lib/functions/uci-defaults.sh
set_usb_led() {
ucidef_set_led_usbdev "usb" "USB" "${1}" "${2:-1-1}"
}
set_wifi_led() {
ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
}
board=$(board_name)
board_config_update
case $board in
11acnas|\
all0239-3g|\
ew1200|\
hw550-3g|\
mofi3500-3gn|\
sap-g3200u3|\
sk-wb8|\
w2914nsv2|\
wf-2881)
set_usb_led "$board:green:usb"
;;
3g150b|\
3g300m)
set_usb_led "$board:blue:3g"
;;
3g-6200n)
set_wifi_led "$board:amber:wlan"
set_usb_led "$board:blue:3g"
;;
3g-6200nl|\
wnce2001)
set_wifi_led "$board:green:wlan"
;;
br-6475nd|\
mzk-w300nh2)
set_wifi_led "$board:amber:wlan"
;;
a5-v11|\
cs-qr10)
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
;;
ai-br100)
ucidef_set_led_netdev "wan" "wan" "$board:blue:wan" "eth0.2"
set_wifi_led "$board:blue:wlan"
;;
air3gii)
set_wifi_led "$board:green:wlan"
set_usb_led "$board:green:mobile"
;;
all0256n-4M|\
all0256n-8M)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
set_wifi_led "rt2800pci-phy0::radio"
;;
ar670w|\
ar725w|\
awapn2403)
set_wifi_led "rt2800soc-phy0::radio"
;;
asl26555-8M|\
asl26555-16M)
ucidef_set_led_default "power" "POWER" "asl26555:green:power" "1"
ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
set_wifi_led "asl26555:green:wlan"
set_usb_led "asl26555:green:3g"
;;
bc2)
set_usb_led "$board:blue:usb"
;;
broadway)
set_usb_led "$board:red:diskmounted"
set_wifi_led "$board:red:wps_active"
;;
c20i)
ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
set_usb_led "$board:blue:usb" "2-1"
ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
;;
c50)
ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
set_usb_led "$board:green:usb"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1
set_wifi_led "$board:green:wlan5g"
;;
cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1
set_wifi_led "$board:white:wifi"
;;
cy-swr1100)
ucidef_set_led_default "wps" "WPS" "$board:blue:wps" "0"
set_usb_led "$board:blue:usb"
;;
d105)
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
set_usb_led "$board:green:usb"
;;
d240)
set_wifi_led "$board:blue:wifi"
set_usb_led "$board:blue:usb"
;;
db-wrt01)
ucidef_set_led_default "power" "power" "$board:orange:power" "1"
;;
dch-m225)
ucidef_set_led_default "power" "POWER" "$board:geeen:power" "1"
ucidef_set_led_default "status" "STATUS" "$board:red:status" "0"
;;
dcs-930l-b1)
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps"
;;
dir-300-b1|\
dir-600-b1|\
dir-620-a1)
ucidef_set_led_default "wan" "WAN LED (amber)" "$board:amber:wan" "1"
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-300-b7|\
dir-320-b1|\
dir-610-a1|\
esr-9753|\
hlk-rm04|\
sl-r7205|\
v11st-fe|\
w306r-v20|\
wt1520-4M|\
wt1520-8M)
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-615-d|\
dir-615-h1)
ucidef_set_led_default "status" "Status LED (amber)" "$board:amber:status" "0"
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-620-d1|\
mzk-ex300np)
set_wifi_led "$board:green:wifi"
;;
dir-810l|\
mzk-750dhp|\
mzk-dp150n|\
vr500)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
;;
dir-860l-b1)
ucidef_set_led_netdev "wan" "wan" "$board:green:net" "eth0.2"
;;
ex2700|\
wn3000rpv3)
set_wifi_led "$board:green:router"
;;
ex3700)
ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$board:green:router" "wlan0"
ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$board:green:device" "wlan1"
;;
f5d8235-v1)
ucidef_set_led_default "lan" "lan" "$board:blue:wired" "0"
set_usb_led "$board:blue:storage"
set_wifi_led "$board:blue:wireless"
;;
f5d8235-v2)
set_usb_led "$board:blue:storage"
;;
fonera20n)
set_usb_led "$board:orange:usb"
set_wifi_led "$board:orange:wifi"
;;
gb-pc1)
ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10"
;;
gl-mt300a|\
gl-mt300n|\
gl-mt750)
set_wifi_led "$board:wlan"
;;
gl-mt300n-v2)
set_wifi_led "$board:red:wlan"
;;
hc5661|\
hc5661a)
ucidef_set_led_default "system" "system" "$board:blue:system" "1"
ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
set_wifi_led "$board:blue:wlan2g"
;;
hc5761)
ucidef_set_led_default "system" "system" "$board:blue:system" "1"
ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
set_wifi_led "$board:blue:wlan2g"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
;;
hc5861)
ucidef_set_led_default "system" "system" "$board:blue:system" "1"
ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
set_wifi_led "$board:blue:wlan2g"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
ucidef_set_led_default "turbo" "turbo" "$board:blue:turbo" "0"
;;
hg255d)
set_wifi_led "$board:green:wlan"
set_usb_led "$board:green:usb"
ucidef_set_led_netdev "internet" "internet" "$board:green:internet" "eth0.2"
;;
hpm)
ucidef_set_led_default "power" "POWER" "$board:orange:power" "1"
ucidef_set_led_netdev "eth" "ETH" "$board:green:eth" "eth0"
set_wifi_led "$board:green:wifi"
;;
ht-tm02)
ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
set_wifi_led "$board:blue:wlan"
;;
kn|\
nbg-419n2)
set_usb_led "$board:green:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
kn_rc|\
kn_rf|\
kng_rc)
set_usb_led "$board:green:usb"
set_wifi_led "$board:green:wifi"
;;
m2m)
set_wifi_led "$board:blue:wifi"
ucidef_set_led_netdev "eth" "Ethernet" "$board:green:wan" "eth0"
;;
miniembplug)
set_wifi_led "$board:red:wlan"
set_usb_led "$board:green:mobile"
;;
miwifi-mini)
ucidef_set_led_default "power" "power" "$board:red:status" "1"
;;
mlw221|\
mlwg2)
set_wifi_led "$board:blue:wifi"
ucidef_set_led_default "system" "system" "$board:blue:system" "1"
;;
mpr-a1|\
mpr-a2)
set_wifi_led "$board:blue:system"
;;
mr-102n)
set_wifi_led "$board:green:wlan"
set_usb_led "$board:green:usb"
;;
mr200)
ucidef_set_led_default "power" "power" "$board:white:power" "1"
ucidef_set_led_netdev "lan" "lan" "$board:white:lan" "eth0.1"
ucidef_set_led_netdev "wan" "wan" "$board:white:wan" "usb0"
set_wifi_led "$board:white:wlan"
;;
mzk-ex750np)
ucidef_set_led_default "power" "power" "$board:red:power" "1"
set_wifi_led "$board:red:wifi"
;;
na930)
set_usb_led "$board:blue:status"
;;
newifi-d1)
set_usb_led "$board:red:status"
;;
nw718)
set_usb_led "$board:amber:usb"
;;
oy-0001)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
set_wifi_led "$board:green:wifi"
;;
pbr-d1)
set_usb_led "$board:orange:usb"
;;
pbr-m1)
ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
;;
psg1208)
set_wifi_led "$board:white:wlan2g"
;;
psg1218a|\
psg1218b)
ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
;;
px-4885-4M|\
px-4885-8M)
set_wifi_led "px-4885:orange:wifi"
set_usb_led "px-4885:blue:storage"
;;
r6220)
ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
set_wifi_led "$board:green:wifi"
set_usb_led "$board:green:usb"
;;
re350-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$board:blue:wifi2G" "wlan0"
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$board:blue:wifi5G" "wlan1"
ucidef_set_led_netdev "eth_act" "LAN act" "$board:green:eth_act" "eth0" "tx rx"
ucidef_set_led_switch "eth_link" "LAN link" "$board:green:eth_link" "switch0" "0x01"
;;
re6500)
ucidef_set_led_default "power" "power" "$board:white:power" "1"
ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
;;
rp-n53)
ucidef_set_led_netdev "eth" "Network" "$board:white:back" "eth0"
set_wifi_led "$board:blue:wifi"
;;
rt-ac51u)
set_wifi_led "$board:blue:wifi"
set_usb_led "$board:blue:usb" "1-1"
;;
rt-n14u)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1
ucidef_set_led_netdev "wan" "wan" "$board:blue:wan" eth0.2
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
tew-714tru)
set_usb_led "$board:red:usb"
set_wifi_led "$board:green:wifi"
;;
tiny-ac)
set_wifi_led "$board:orange:wifi"
set_usb_led "$board:green:usb"
;;
tl-wr840n-v4)
set_wifi_led "$board:green:wlan"
ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
;;
tl-wr841n-v13)
set_wifi_led "$board:green:wlan"
ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x2"
ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x4"
ucidef_set_led_switch "lan3" "lan3" "$board:green:lan3" "switch0" "0x8"
ucidef_set_led_switch "lan4" "lan4" "$board:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
;;
vocore-8M|\
vocore-16M)
ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
set_wifi_led "vocore:green:status"
;;
vocore2)
set_wifi_led "$board:fuchsia:status"
;;
w502u)
set_usb_led "$board:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
wcr-150gn)
set_usb_led "$board:amber:user"
;;
whr-1166d|\
whr-300hp2|\
whr-600d)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
ucidef_set_led_default "router" "router" "$board:green:router" "1"
;;
wl-wn575a3)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49"
ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84"
ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100"
;;
wrh-300cr)
set_wifi_led "$board:green:wlan"
ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"
;;
wndr3700v5)
ucidef_set_led_default "power" "POWER" "$board:green:power" "0"
;;
wt3020-4M|\
wt3020-8M)
ucidef_set_led_default "power" "power" "wt3020:blue:power" "0"
;;
y1)
set_usb_led "$board:blue:usb"
ucidef_set_led_netdev "wifi" "WIFI" "$board:blue:wifi" "wlan1"
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi5g" "wlan0"
ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0.1" "tx rx"
ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
;;
y1s)
set_usb_led "$board:blue:usb"
ucidef_set_led_netdev "wifi" "WIFI" "$board:yellow:wifi" "wlan1"
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi" "wlan0"
ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
;;
zbt-ape522ii)
ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"
ucidef_set_led_netdev "sys1" "wlan1" "$board:green:sys1" "wlan1" "tx rx"
ucidef_set_led_netdev "sys2" "wlan0" "$board:green:sys2" "wlan0" "tx rx"
;;
zbt-cpe102)
ucidef_set_led_default "power" "power" "$board:green:4g-0" "0"
;;
zbt-wa05)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
zbt-we2026)
set_wifi_led "$board:green:wlan"
;;
zbt-we826-16M|\
zbt-we826-32M)
set_wifi_led "zbt-we826:green:wifi"
set_usb_led "zbt-we826:green:usb"
;;
zbt-wr8305rt)
ucidef_set_led_default "power" "power" "$board:green:sys" "1"
set_usb_led "$board:green:usb"
set_wifi_led "$board:green:wifi"
;;
zte-q7)
set_wifi_led "$board:blue:status"
;;
youku-yk1)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
esac
board_config_flush
exit 0