KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/lantiq/image/Makefile
Mathias Kresin 17094e9e64 lantiq: rework VG3503J image 
Use the new image build code and remove the lzma loader. The lzma
loader was used to cheat the signature validation of the bootloader and
I found another way to do this.

To migrate boards already using LEDE/OpenWrt to the new image the
following steps need to be done once:

  VR9 # run reset_uboot_config
  VR9 # reset
  VR9 # setenv ethaddr AA:BB:CC:DD:EE:FF
  VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000
  VR9 # saveenv
  VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin
  VR9 # erase 0xb0020000 $(filesize)
  VR9 # cp.b 0x81000000 0xb0020000 $(filesize)

The mac address is printed on the label at the bottom of the case.

The following steps are need to be done during first install:

  VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000
  VR9 # saveenv
  VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin
  VR9 # erase 0xb0020000 $(filesize)
  VR9 # cp.b 0x81000000 0xb0020000 $(filesize)

The image uses the uImage firmware splitter now instead of hardcoded
kernel and rootfs partitions. The firmware partition size was extended
to use flash space that was reserved for partitions required only by
the ECI firmware.

Due to the changes an upgrade to a later LEDE revision from a running
LEDE is supported now.

A default switch config was added and the device uses the same MAC
addresses as the ECI firmware now instead of the same for all VG3503J.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:06:15 +02:00

648 lines
19 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2010-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# boards missing since devicetree update
#EASY50712 ARV3527P
JFFS2_BLOCKSIZE = 64k 128k 256k
KERNEL_LOADADDR = 0x80002000
KERNEL_ENTRY = 0x80002000
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
ifeq ($(SUBTARGET),xway)
UBIFS_OPTS := -m 512 -e 15872 -c 1959
else
UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
endif
define Build/eva-image
lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
( dd if=$@.new bs=64k conv=sync; cat ./eva.dummy.squashfs; ) > $@
endef
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) $(2)
endef
define PatchKernelLzma
cp $(KDIR)/vmlinux$(2) $(KDIR)/vmlinux$(2)-$(1)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(1).dtb ../dts/$(1).dts
cat $(KDIR)/vmlinux$(2)-$(1) $(KDIR)/$(1).dtb > $(KDIR)/vmlinux$(2)-$(1).tmp
$(call CompressLzma,$(KDIR)/vmlinux$(2)-$(1).tmp,$(KDIR)/vmlinux$(2)-$(1).lzma)
endef
define MkImageLzma
mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma \
-e 0x80002000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(KDIR)/vmlinux$(2)-$(1).lzma $(KDIR)/uImage-$(1)$(2)
endef
define Image/Build/squashfs
cat $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image)
endef
DGN3500_SKERNEL=0x50000
DGN3500_SKERNEL_DECIMAL=327680
define Image/BuildDGN3500/squashfs
dd if=/dev/zero of=$(BIN_DIR)/$(IMG_PREFIX)-pad bs=$(DGN3500_SKERNEL_DECIMAL) count=1
cat $(BIN_DIR)/$(IMG_PREFIX)-pad $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img
rm -r $(BIN_DIR)/$(IMG_PREFIX)-pad
dd if=/dev/zero ibs=16M count=1 | tr "\000" "\377" > $(BIN_DIR)/$(IMG_PREFIX)-pwf
cp $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadNA.img
dgn3500sum $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadNA.img $(DGN3500_SKERNEL) NA
$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadNA.img)
cp $(BIN_DIR)/$(IMG_PREFIX)-pwf $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-NA.img
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadNA.img of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-NA.img conv=notrunc
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadNA.img of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade-NA.image bs=$(DGN3500_SKERNEL_DECIMAL) skip=1
rm -r $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadNA.img
mv $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadWW.img
dgn3500sum $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadWW.img $(DGN3500_SKERNEL) WW
$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadWW.img)
mv $(BIN_DIR)/$(IMG_PREFIX)-pwf $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-WW.img
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadWW.img of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-WW.img conv=notrunc
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadWW.img of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade-WW.image bs=$(DGN3500_SKERNEL_DECIMAL) skip=1
rm -r $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepadWW.img
endef
define Image/BuildDGN3500B/squashfs
dd if=/dev/zero of=$(BIN_DIR)/$(IMG_PREFIX)-pad bs=327680 count=1
cat $(BIN_DIR)/$(IMG_PREFIX)-pad $(KDIR)/uImage-$(2) $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img
rm -r $(BIN_DIR)/$(IMG_PREFIX)-pad
dd if=/dev/zero ibs=16M count=1 | tr "\000" "\377" > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.img
dgn3500sum $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img $(DGN3500_SKERNEL) DE
$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img)
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.img conv=notrunc
dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.image bs=$(DGN3500_SKERNEL_DECIMAL) skip=1
rm -r $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory-prepad.img
dgn3500sum $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.image $(DGN3500_SKERNEL) DE
endef
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
define Image/BuildKernel/InitramfsTemplate
$(call PatchKernelLzma,$(1),-initramfs)
$(call MkImageLzma,$(1),-initramfs)
$(CP) $(KDIR)/uImage-$(1)-initramfs $(BIN_DIR)/$(IMG_PREFIX)-$(1)-uImage-initramfs
endef
endif
define Image/BuildKernel/Template
$(call PatchKernelLzma,$(1))
$(call MkImageLzma,$(1))
$(CP) $(KDIR)/uImage-$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1)-uImage
$(Image/BuildKernel/InitramfsTemplate)
endef
### Kernel scripts ###
define Build/mkbrncmdline
mkbrncmdline -i $@ -o $@.new BRN-BOOT
mv $@.new $@
endef
define Build/mkbrnimg
mkbrnimg -s $(SIGNATURE) -m $(MAGIC) -p $(CRC32_POLY) -o $@ $(IMAGE_KERNEL) $(IMAGE_ROOTFS)
endef
define Build/fullimage
mkimage -A mips -O linux -C lzma -T filesystem -a 0x00 \
-e 0x00 -n 'LEDE RootFS' \
-d $(IMAGE_ROOTFS) $(IMAGE_ROOTFS).new
cat $(IMAGE_KERNEL) $(IMAGE_ROOTFS).new > $@.tmp
mkimage -A mips -O linux -T multi -a 0x00 -C none \
-e 0x00 -n 'OpenWrt fullimage' \
-d $@.tmp $@
rm $(IMAGE_ROOTFS).new
rm $@.tmp
endef
# Shared device definition: applies to every defined device
define Device/Default
PROFILES = Default
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
FILESYSTEMS := squashfs
DEVICE_DTS := $(1)
DEVICE_DTS_DIR := ../dts
IMAGE_SIZE :=
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += IMAGE_SIZE
define Device/NAND/xway
BLOCKSIZE := 16k
PAGESIZE := 512
SUBPAGESIZE := 256
FILESYSTEMS += ubifs
endef
define Device/NAND/xrx200
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
FILESYSTEMS += ubifs
endef
define Device/NAND
$(Device/NAND/$(SUBTARGET))
IMAGE/sysupgrade.bin := sysupgrade-tar
endef
define Device/lantiqBrnImage
KERNEL := kernel-bin | append-dtb | mkbrncmdline | lzma-no-dict
IMAGES := factory.bin
IMAGE/factory.bin := mkbrnimg | check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
define Device/lantiqFullImage
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-offset 4 0
IMAGES := sysupgrade.bin fullimage.img
IMAGE/fullimage.img := fullimage | check-size $$$$(IMAGE_SIZE)
endef
define Device/AVM
KERNEL := kernel-bin | append-dtb | lzma | eva-image
endef
ifeq ($(SUBTARGET),xway_legacy)
define Device/ARV4520PW
IMAGE_SIZE := 3648k
DEVICE_TITLE := Easybox 800, WAV-281 - ARV4520PW
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt61-pci wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV4520PW
define Device/ARV4525PW
IMAGE_SIZE := 3776k
DEVICE_TITLE := Speedport W502V Typ A - ARV4525PW
DEVICE_PACKAGES := kmod-ath5k wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa
endef
TARGET_DEVICES += ARV4525PW
define Device/ARV452CQW
IMAGE_SIZE := 3776k
DEVICE_TITLE := Easybox 801 - ARV452CQW
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ath5k wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
swconfig
endef
TARGET_DEVICES += ARV452CQW
define Device/ARV4518PWR01
IMAGE_SIZE := 3776k
DEVICE_TITLE := ARV4518PWR01
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath5k wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV4518PWR01
define Device/ARV4518PWR01A
IMAGE_SIZE := 3776k
DEVICE_TITLE := ARV4518PWR01A
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath5k wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV4518PWR01A
endif
ifeq ($(SUBTARGET),xway)
# Danube
define Device/BTHOMEHUBV2B
$(Device/NAND)
DEVICE_TITLE := BT Home Hub 2B
DEVICE_PACKAGES := kmod-ltq-hcd-danube \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
kmod-ltq-deu-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini \
swconfig
endef
TARGET_DEVICES += BTHOMEHUBV2B
define Device/EASY50712
IMAGE_SIZE := 3776k
DEVICE_TITLE := Lantiq Danube - EASY50712
endef
TARGET_DEVICES += EASY50712
define Device/ACMP252
IMAGE_SIZE := 14848k
DEVICE_TITLE := AudioCodes MediaPack MP-252
DEVICE_PACKAGES := kmod-rt2x00-pci wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-ptm-danube \
ltq-adsl-app
endef
TARGET_DEVICES += ACMP252
define Device/ARV4510PW
IMAGE_SIZE := 15616k
DEVICE_TITLE := Wippies, Elisa - ARV4510PW
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport kmod-usb2-pci kmod-usb-uhci \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci kmod-ath5k wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV4510PW
define Device/ARV7525PW
IMAGE_SIZE := 3776k
DEVICE_TITLE := Speedport W303V Typ A - ARV7525PW
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa
endef
TARGET_DEVICES += ARV7525PW
define Device/ARV4519PW
IMAGE_SIZE := 3776k
DEVICE_TITLE := Vodafone, Pirelli - ARV4519PW
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
swconfig
endef
TARGET_DEVICES += ARV4519PW
define Device/ARV7506PW11
IMAGE_SIZE := 7808k
DEVICE_TITLE := Alice/O2 IAD 4421 - ARV7506PW11
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt2800-pci wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV7506PW11
define Device/ARV7510PW22
IMAGE_SIZE := 31232k
DEVICE_TITLE := Astoria - ARV7510PW22
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci wpad-mini \
kmod-usb-uhci kmod-usb2 kmod-usb2-pci \
swconfig
endef
TARGET_DEVICES += ARV7510PW22
define Device/ARV7518PW
IMAGE_SIZE := 7872k
DEVICE_TITLE := Astoria - ARV7518PW
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV7518PW
define Device/ARV7519PW
IMAGE_SIZE := 15488k
DEVICE_TITLE := Astoria - ARV7519PW
DEVICE_PACKAGES := kmod-ltq-hcd-danube \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt2800-pci wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV7519PW
define Device/ARV752DPW
IMAGE_SIZE := 7872k
DEVICE_TITLE := Easybox 802 - ARV752DPW
DEVICE_PACKAGES := kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV752DPW
define Device/ARV752DPW22
IMAGE_SIZE := 7616k
DEVICE_TITLE := Easybox 803 - ARV752DPW22
DEVICE_PACKAGES := kmod-usb2-pci kmod-usb-uhci kmod-ltq-hcd-danube kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV752DPW22
define Device/ARV8539PW22
IMAGE_SIZE := 7616k
DEVICE_TITLE := Speedport W504V Typ A - ARV8539PW22
DEVICE_PACKAGES := kmod-ltq-hcd-danube \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini \
swconfig
endef
TARGET_DEVICES += ARV8539PW22
define Device/GIGASX76X
IMAGE_SIZE := 7680k
DEVICE_TITLE := Gigaset sx76x
DEVICE_PACKAGES := kmod-ltq-hcd-danube \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoe \
kmod-ath5k wpad-mini \
swconfig
endef
TARGET_DEVICES += GIGASX76X
# AR9
define Device/BTHOMEHUBV3A
$(Device/NAND)
DEVICE_TITLE := BT Home Hub 3A
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
kmod-ltq-deu-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini \
swconfig uboot-envtools
endef
TARGET_DEVICES += BTHOMEHUBV3A
Image/BuildKernel/Profile/DGN3500=$(call Image/BuildKernel/Template,DGN3500)
Image/Build/Profile/DGN3500=$(call Image/BuildDGN3500/$(1),$(1),DGN3500)
define LegacyDevice/DGN3500
DEVICE_TITLE := Netgear DGN3500
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath9k wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9 swconfig
endef
LEGACY_DEVICES += DGN3500
Image/BuildKernel/Profile/DGN3500B=$(call Image/BuildKernel/Template,DGN3500B)
Image/Build/Profile/DGN3500B=$(call Image/BuildDGN3500B/$(1),$(1),DGN3500B)
define LegacyDevice/DGN3500B
DEVICE_TITLE := Netgear DGN3500B
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath9k wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9 swconfig
endef
LEGACY_DEVICES += DGN3500B
define Device/WBMRA
IMAGE_SIZE := 31488k
DEVICE_DTS := WBMR
DEVICE_TITLE := Buffalo WBMR-HP-G300H (A) - WBMR
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini swconfig
endef
TARGET_DEVICES += WBMRA
define Device/WBMRB
IMAGE_SIZE := 31488k
DEVICE_DTS := WBMR
DEVICE_TITLE := Buffalo WBMR-HP-G300H (B) - WBMR
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini swconfig
endef
TARGET_DEVICES += WBMRB
define Device/FRITZ7320
$(Device/AVM)
IMAGE_SIZE := 15744k
DEVICE_TITLE := 1&1 HomeServer - FRITZ7320
DEVICE_PACKAGES := kmod-ath9k wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9 kmod-usb-dwc2 \
kmod-ath9k wpad-mini
endef
TARGET_DEVICES += FRITZ7320
define Device/H201L
IMAGE_SIZE := 7808k
DEVICE_TITLE := ZTE H201L - H201L
DEVICE_PACKAGES := kmod-ath9k-htc wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoe \
kmod-ltq-deu-ar9 kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-tapi kmod-ltq-vmmc \
swconfig
endef
TARGET_DEVICES += H201L
define Device/P2601HNFX
IMAGE_SIZE := 15616k
DEVICE_TITLE := ZyXEL P-2601HN-Fx
DEVICE_PACKAGES := kmod-rt2800-usb wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoe \
kmod-ltq-deu-ar9 kmod-usb-dwc2 \
swconfig
endef
TARGET_DEVICES += P2601HNFX
endif
ifeq ($(SUBTARGET),xrx200)
# VR9
define Device/P2812HNUF1
$(Device/NAND)
DEVICE_TITLE := ZyXEL P-2812HNU-F1
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += P2812HNUF1
define Device/P2812HNUF3
$(Device/NAND)
DEVICE_TITLE := ZyXEL P-2812HNU-F3
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += P2812HNUF3
define Device/ARV7519RW22
IMAGE_SIZE := 31232k
DEVICE_TITLE := Livebox Astoria ARV7519RW22
DEVICE_PACKAGES := kmod-usb-dwc2
endef
TARGET_DEVICES += ARV7519RW22
define Device/BTHOMEHUBV5A
$(Device/NAND)
DEVICE_TITLE := BT Home Hub 5A
DEVICE_PACKAGES := kmod-ath9k kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += BTHOMEHUBV5A
define Device/EASY80920NAND
$(Device/lantiqFullImage)
IMAGE_SIZE := 64512k
DEVICE_TITLE := Lantiq VR9 - EASY80920NAND
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += EASY80920NAND
define Device/EASY80920NOR
IMAGE_SIZE := 7936k
DEVICE_TITLE := Lantiq VR9 - EASY80920NOR
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += EASY80920NOR
define Device/FRITZ3370
$(Device/AVM)
$(Device/NAND)
DEVICE_TITLE := Fritz!Box WLan - FRITZ3370
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += FRITZ3370
define Device/FRITZ7360SL
$(Device/AVM)
IMAGE_SIZE := 15744k
DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += FRITZ7360SL
define Device/VG3503J
IMAGE_SIZE := 8000k
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem
endef
TARGET_DEVICES += VG3503J
include tp-link.mk
define Device/WBMR300
IMAGE_SIZE := 15616k
DEVICE_TITLE := Buffalo WBMR-300HPD
DEVICE_PACKAGES := kmod-mt76 wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += WBMR300
define Device/VGV7510KW22NOR
IMAGE_SIZE := 15232k
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (NOR)
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += VGV7510KW22NOR
define Device/VGV7510KW22BRN
$(Device/lantiqBrnImage)
IMAGE_SIZE := 7168k
SIGNATURE := 5D00008000
MAGIC := 0x12345678
CRC32_POLY := 0x2083b8ed
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (BRN)
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += VGV7510KW22BRN
define Device/VGV7519NOR
IMAGE_SIZE := 15360k
DEVICE_TITLE := Experiabox 8 VGV7519
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += VGV7519NOR
define Device/VGV7519BRN
$(Device/lantiqBrnImage)
IMAGE_SIZE := 7168k
SIGNATURE := 5D00008000
MAGIC := 0x12345678
CRC32_POLY := 0x2083b8ed
DEVICE_TITLE := Experiabox 8 VGV7519 (BRN)
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += VGV7519BRN
endif
define Image/Prepare/Profile
$(call Image/Prepare/Profile/$(1))
endef
define Image/BuildKernel/Profile
$(call Image/BuildKernel/Profile/$(1))
endef
define Image/Build/Profile
$(call Image/Build/Profile/$(1),$(2))
endef
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink