openwrtv4/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts
Mathias Kresin c9e9a78734 lantiq: add support for upgrade led
Indicate a (sys)upgrade via leds as well. It brings the lantiq diag.sh
script en par with the other implementations using devicetree aliases
to define multiple leds for boot status indication.

By default, use the boot finished led to indicate an upgrade for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-16 21:20:57 +02:00

263 lines
5 KiB
Text

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_orange;
led-failsafe = &power_red;
led-running = &power_blue;
led-upgrade = &power_blue;
led-dsl = &broadband_blue;
led-wifi = &wireless_blue;
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
reg = <0x0 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
findhandset {
label = "findhandset";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
wps {
label = "wps";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
upgrading-orange {
label = "bthomehubv2b:orange:upgrading";
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
phone-orange {
label = "bthomehubv2b:orange:phone";
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
phone-blue {
label = "bthomehubv2b:blue:phone";
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
wireless-orange {
label = "bthomehubv2b:orange:wireless";
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
wireless_blue: wireless-blue {
label = "bthomehubv2b:blue:wireless";
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
broadband-red {
label = "bthomehubv2b:red:broadband";
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
broadband-orange {
label = "bthomehubv2b:orange:broadband";
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
broadband_blue: broadband-blue {
label = "bthomehubv2b:blue:broadband";
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
power_red: power-red {
label = "bthomehubv2b:red:power";
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
power_orange: power-orange {
label = "bthomehubv2b:orange:power";
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv2b:blue:power";
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
};
btn_in {
lantiq,pins = "io2", "io15", "io22";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
};
};
&gpios {
status = "okay";
};
&gsw {
phy-mode = "rmii";
};
&localbus {
nor@0 { /* NOR Flash: Spansion S29AL004D 512KB */
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
lantiq,cs = <0>;
bank-width = <2>;
reg = <0 0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>; /* 256KB */
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>; /* 64KB */
};
partition@50000 {
label = "rg_conf_1";
reg = <0x50000 0x10000>;
};
partition@60000 {
label = "rg_conf_2";
reg = <0x60000 0x10000>;
};
partition@70000 {
label = "rg_conf_factory";
reg = <0x70000 0x10000>;
};
};
};
nand@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
#address-cells = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ath9k_cal: partition@0 {
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
reg = <0x00000 0x4000>;
read-only;
};
partition@4000 {
label = "kernel";
reg = <0x4000 0x200000>;
};
partition@164000 {
label = "ubi";
reg = <0x204000 0x1DFC000>;
};
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0027 {
compatible = "pci168c,0027";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};
&vmmc {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};