openwrtv4/target/linux/brcm2708/patches-4.4/0486-Overlay-for-Microchip-MCP23S08-17-SPI-gpio-expanders.patch
Álvaro Fernández Rojas 2b1c6b21b5 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-10 14:54:26 +02:00

791 lines
26 KiB
Diff

From bd7c2eac2ada8f60058768b00935cdfe010720a5 Mon Sep 17 00:00:00 2001
From: wavelet2 <a3d35232@btinternet.com>
Date: Fri, 19 Aug 2016 09:32:53 +0100
Subject: [PATCH] Overlay for Microchip MCP23S08/17 SPI gpio expanders (#1566)
Added Overlay for Microchip MCP23S08/17 SPI gpio expanders
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 24 +
arch/arm/boot/dts/overlays/mcp23s17-overlay.dts | 732 ++++++++++++++++++++++++
3 files changed, 757 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/mcp23s17-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -49,6 +49,7 @@ dtbo-$(RPI_DT_OVERLAYS) += justboom-dac.
dtbo-$(RPI_DT_OVERLAYS) += justboom-digi.dtbo
dtbo-$(RPI_DT_OVERLAYS) += lirc-rpi.dtbo
dtbo-$(RPI_DT_OVERLAYS) += mcp23017.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += mcp23s17.dtbo
dtbo-$(RPI_DT_OVERLAYS) += mcp2515-can0.dtbo
dtbo-$(RPI_DT_OVERLAYS) += mcp2515-can1.dtbo
dtbo-$(RPI_DT_OVERLAYS) += mmc.dtbo
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -628,6 +628,30 @@ Params: gpiopin Gpio pin
addr I2C address of the MCP23017 (default: 0x20)
+Name: mcp23s17
+Info: Configures the MCP23S08/17 SPI GPIO expanders.
+ If devices are present on SPI1 or SPI2, those interfaces must be enabled
+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
+ If interrupts are enabled for a device on a given CS# on a SPI bus, that
+ device must be the only one present on that SPI bus/CS#.
+Load: dtoverlay=mcp23s17,<param>=<val>
+Params: s08-spi<n>-<m>-present 4-bit integer, bitmap indicating MCP23S08
+ devices present on SPI<n>, CS#<m>
+
+ s17-spi<n>-<m>-present 8-bit integer, bitmap indicating MCP23S17
+ devices present on SPI<n>, CS#<m>
+
+ s08-spi<n>-<m>-int-gpio integer, enables interrupts on a single
+ MCP23S08 device on SPI<n>, CS#<m>, specifies
+ the GPIO pin to which INT output of MCP23S08
+ is connected.
+
+ s17-spi<n>-<m>-int-gpio integer, enables mirrored interrupts on a
+ single MCP23S17 device on SPI<n>, CS#<m>,
+ specifies the GPIO pin to which either INTA
+ or INTB output of MCP23S17 is connected.
+
+
Name: mcp2515-can0
Info: Configures the MCP2515 CAN controller on spi0.0
Load: dtoverlay=mcp2515-can0,<param>=<val>
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts
@@ -0,0 +1,732 @@
+// Overlay for MCP23S08/17 GPIO Extenders from Microchip Semiconductor
+
+// dtparams:
+// s08-spi<n>-<m>-present - 4-bit integer, bitmap indicating MCP23S08 devices present on SPI<n>, CS#<m>.
+// s17-spi<n>-<m>-present - 8-bit integer, bitmap indicating MCP23S17 devices present on SPI<n>, CS#<m>.
+// s08-spi<n>-<m>-int-gpio - integer, enables interrupts on a single MCP23S08 device on SPI<n>, CS#<m>, specifies the GPIO pin to which INT output is connected.
+// s17-spi<n>-<m>-int-gpio - integer, enables mirrored interrupts on a single MCP23S17 device on SPI<n>, CS#<m>, specifies the GPIO pin to which either INTA or INTB output is connected.
+//
+// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
+// If interrupts are enabled for a device on a given CS# on a SPI bus, that device must be the only one present on that SPI bus/CS#.
+//
+// Example 1: A single MCP23S17 device on SPI0, CS#0 with its SPI addr set to 0 and INTA output connected to GPIO25:
+// dtoverlay=mcp23s17:s17-spi0-0-present=1,s17-spi0-0-int-gpio=25
+//
+// Example 2: Two MCP23S08 devices on SPI1, CS#0 with their addrs set to 2 and 3. Three MCP23S17 devices on SPI1, CS#1 with their addrs set to 0, 1 and 7:
+// dtoverlay=spi1-2cs
+// dtoverlay=mcp23s17:s08-spi1-0-present=12,s17-spi1-1-present=131
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ // disable spi-dev on spi0.0
+ fragment@0 {
+ target = <&spidev0>;
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi0.1
+ fragment@1 {
+ target = <&spidev1>;
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi1.0
+ fragment@2 {
+ target-path = "spi1/spidev@0";
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi1.1
+ fragment@3 {
+ target-path = "spi1/spidev@1";
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi1.2
+ fragment@4 {
+ target-path = "spi1/spidev@2";
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi2.0
+ fragment@5 {
+ target-path = "spi2/spidev@0";
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi2.1
+ fragment@6 {
+ target-path = "spi2/spidev@1";
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // disable spi-dev on spi2.2
+ fragment@7 {
+ target-path = "spi2/spidev@2";
+ __dormant__ {
+ status = "disabled";
+ };
+ };
+
+ // enable one or more mcp23s08s on spi0.0
+ fragment@8 {
+ target = <&spi0>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_00: mcp23s08@0 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-0-present parameter */
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-0-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi0.1
+ fragment@9 {
+ target = <&spi0>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_01: mcp23s08@1 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-1-present parameter */
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-1-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi1.0
+ fragment@10 {
+ target = <&spi1>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_10: mcp23s08@0 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-0-present parameter */
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-0-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi1.1
+ fragment@11 {
+ target = <&spi1>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_11: mcp23s08@1 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-1-present parameter */
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-1-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi1.2
+ fragment@12 {
+ target = <&spi1>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_12: mcp23s08@2 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-2-present parameter */
+ reg = <2>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-2-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi2.0
+ fragment@13 {
+ target = <&spi2>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_20: mcp23s08@0 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-0-present parameter */
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-0-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi2.1
+ fragment@14 {
+ target = <&spi2>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_21: mcp23s08@1 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-1-present parameter */
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-1-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s08s on spi2.2
+ fragment@15 {
+ target = <&spi2>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s08_22: mcp23s08@2 {
+ compatible = "microchip,mcp23s08";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-2-present parameter */
+ reg = <2>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-2-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi0.0
+ fragment@16 {
+ target = <&spi0>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_00: mcp23s17@0 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-0-present parameter */
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-0-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi0.1
+ fragment@17 {
+ target = <&spi0>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_01: mcp23s17@1 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-1-present parameter */
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-1-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi1.0
+ fragment@18 {
+ target = <&spi1>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_10: mcp23s17@0 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-0-present parameter */
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-0-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi1.1
+ fragment@19 {
+ target = <&spi1>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_11: mcp23s17@1 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-1-present parameter */
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-1-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi1.2
+ fragment@20 {
+ target = <&spi1>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_12: mcp23s17@2 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-2-present parameter */
+ reg = <2>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-2-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi2.0
+ fragment@21 {
+ target = <&spi2>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_20: mcp23s17@0 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-0-present parameter */
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-0-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi2.1
+ fragment@22 {
+ target = <&spi2>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_21: mcp23s17@1 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-1-present parameter */
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-1-int-gpio parameter */
+ };
+ };
+ };
+
+ // enable one or more mcp23s17s on spi2.2
+ fragment@23 {
+ target = <&spi2>;
+ __dormant__ {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mcp23s17_22: mcp23s17@2 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-2-present parameter */
+ reg = <2>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ #interrupt-cells=<2>;
+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-2-int-gpio parameter */
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.0 as a input with no pull-up/down
+ fragment@24 {
+ target = <&gpio>;
+ __dormant__ {
+ spi0_0_int_pins: spi0_0_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-0-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.1 as a input with no pull-up/down
+ fragment@25 {
+ target = <&gpio>;
+ __dormant__ {
+ spi0_1_int_pins: spi0_1_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-1-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.0 as a input with no pull-up/down
+ fragment@26 {
+ target = <&gpio>;
+ __dormant__ {
+ spi1_0_int_pins: spi1_0_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-0-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.1 as a input with no pull-up/down
+ fragment@27 {
+ target = <&gpio>;
+ __dormant__ {
+ spi1_1_int_pins: spi1_1_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-1-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.2 as a input with no pull-up/down
+ fragment@28 {
+ target = <&gpio>;
+ __dormant__ {
+ spi1_2_int_pins: spi1_2_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-2-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.0 as a input with no pull-up/down
+ fragment@29 {
+ target = <&gpio>;
+ __dormant__ {
+ spi2_0_int_pins: spi2_0_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-0-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.1 as a input with no pull-up/down
+ fragment@30 {
+ target = <&gpio>;
+ __dormant__ {
+ spi2_1_int_pins: spi2_1_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-1-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.2 as a input with no pull-up/down
+ fragment@31 {
+ target = <&gpio>;
+ __dormant__ {
+ spi2_2_int_pins: spi2_2_int_pins {
+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-2-int-gpio parameter */
+ brcm,function = <0>;
+ brcm,pull = <0>;
+ };
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi0.0.
+ // Use default active low interrupt signalling.
+ fragment@32 {
+ target = <&mcp23s08_00>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi0.1.
+ // Use default active low interrupt signalling.
+ fragment@33 {
+ target = <&mcp23s08_01>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi1.0.
+ // Use default active low interrupt signalling.
+ fragment@34 {
+ target = <&mcp23s08_10>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi1.1.
+ // Use default active low interrupt signalling.
+ fragment@35 {
+ target = <&mcp23s08_11>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi1.2.
+ // Use default active low interrupt signalling.
+ fragment@36 {
+ target = <&mcp23s08_12>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi2.0.
+ // Use default active low interrupt signalling.
+ fragment@37 {
+ target = <&mcp23s08_20>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi2.1.
+ // Use default active low interrupt signalling.
+ fragment@38 {
+ target = <&mcp23s08_21>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s08 on spi2.2.
+ // Use default active low interrupt signalling.
+ fragment@39 {
+ target = <&mcp23s08_22>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi0.0.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Use default active low interrupt signalling.
+ fragment@40 {
+ target = <&mcp23s17_00>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi0.1.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@41 {
+ target = <&mcp23s17_01>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi1.0.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@42 {
+ target = <&mcp23s17_10>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi1.1.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@43 {
+ target = <&mcp23s17_11>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi1.2.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@44 {
+ target = <&mcp23s17_12>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi2.0.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@45 {
+ target = <&mcp23s17_20>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi2.1.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@46 {
+ target = <&mcp23s17_21>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ // Enable interrupts for a mcp23s17 on spi2.2.
+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin.
+ // Configure INTA/B outputs of mcp23s08/17 as active low.
+ fragment@47 {
+ target = <&mcp23s17_22>;
+ __dormant__ {
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ microchip,irq-mirror;
+ };
+ };
+
+ __overrides__ {
+ s08-spi0-0-present = <0>,"+0+8", <&mcp23s08_00>,"microchip,spi-present-mask:0";
+ s08-spi0-1-present = <0>,"+1+9", <&mcp23s08_01>,"microchip,spi-present-mask:0";
+ s08-spi1-0-present = <0>,"+2+10", <&mcp23s08_10>,"microchip,spi-present-mask:0";
+ s08-spi1-1-present = <0>,"+3+11", <&mcp23s08_11>,"microchip,spi-present-mask:0";
+ s08-spi1-2-present = <0>,"+4+12", <&mcp23s08_12>,"microchip,spi-present-mask:0";
+ s08-spi2-0-present = <0>,"+5+13", <&mcp23s08_20>,"microchip,spi-present-mask:0";
+ s08-spi2-1-present = <0>,"+6+14", <&mcp23s08_21>,"microchip,spi-present-mask:0";
+ s08-spi2-2-present = <0>,"+7+15", <&mcp23s08_22>,"microchip,spi-present-mask:0";
+ s17-spi0-0-present = <0>,"+0+16", <&mcp23s17_00>,"microchip,spi-present-mask:0";
+ s17-spi0-1-present = <0>,"+1+17", <&mcp23s17_01>,"microchip,spi-present-mask:0";
+ s17-spi1-0-present = <0>,"+2+18", <&mcp23s17_10>,"microchip,spi-present-mask:0";
+ s17-spi1-1-present = <0>,"+3+19", <&mcp23s17_11>,"microchip,spi-present-mask:0";
+ s17-spi1-2-present = <0>,"+4+20", <&mcp23s17_12>,"microchip,spi-present-mask:0";
+ s17-spi2-0-present = <0>,"+5+21", <&mcp23s17_20>,"microchip,spi-present-mask:0";
+ s17-spi2-1-present = <0>,"+6+22", <&mcp23s17_21>,"microchip,spi-present-mask:0";
+ s17-spi2-2-present = <0>,"+7+23", <&mcp23s17_22>,"microchip,spi-present-mask:0";
+ s08-spi0-0-int-gpio = <0>,"+24+32", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s08_00>,"interrupts:0";
+ s08-spi0-1-int-gpio = <0>,"+25+33", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s08_01>,"interrupts:0";
+ s08-spi1-0-int-gpio = <0>,"+26+34", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s08_10>,"interrupts:0";
+ s08-spi1-1-int-gpio = <0>,"+27+35", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s08_11>,"interrupts:0";
+ s08-spi1-2-int-gpio = <0>,"+28+36", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s08_12>,"interrupts:0";
+ s08-spi2-0-int-gpio = <0>,"+29+37", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s08_20>,"interrupts:0";
+ s08-spi2-1-int-gpio = <0>,"+30+38", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s08_21>,"interrupts:0";
+ s08-spi2-2-int-gpio = <0>,"+31+39", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s08_22>,"interrupts:0";
+ s17-spi0-0-int-gpio = <0>,"+24+40", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s17_00>,"interrupts:0";
+ s17-spi0-1-int-gpio = <0>,"+25+41", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s17_01>,"interrupts:0";
+ s17-spi1-0-int-gpio = <0>,"+26+42", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s17_10>,"interrupts:0";
+ s17-spi1-1-int-gpio = <0>,"+27+43", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s17_11>,"interrupts:0";
+ s17-spi1-2-int-gpio = <0>,"+28+44", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s17_12>,"interrupts:0";
+ s17-spi2-0-int-gpio = <0>,"+29+45", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s17_20>,"interrupts:0";
+ s17-spi2-1-int-gpio = <0>,"+30+46", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s17_21>,"interrupts:0";
+ s17-spi2-2-int-gpio = <0>,"+31+47", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s17_22>,"interrupts:0";
+ };
+};
+