openwrtv4/target/linux/kirkwood/image/Makefile
Luka Perkov 0c25f159fd kirkwood: update support for iconnect
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39591
2014-02-15 23:53:08 +00:00

144 lines
4.7 KiB
Makefile

#
# Copyright (C) 2009-2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
NAND_BLOCKSIZE := 2048:128k
define sanitize_profile_name
$(shell echo $(PROFILE) | tr '[:upper:]' '[:lower:]')
endef
define Image/BuildKernel/Template
$(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
echo -ne '\x00\x00\x00\x00' >> $(BIN_DIR)/$(IMG_PREFIX)-zImage
$(call Image/BuildKernel/MkuImage, \
none, 0x8000, 0x8000, \
$(BIN_DIR)/$(IMG_PREFIX)-zImage, \
$(BIN_DIR)/$(IMG_PREFIX)-uImage \
)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
echo -ne '\x00\x00\x00\x00' >> $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
$(call Image/BuildKernel/MkuImage, \
none, 0x8000, 0x8000, \
$(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs, \
$(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs \
)
endif
ifneq ($(1),)
$(CP) $(LINUX_DIR)/arch/arm/boot/dts/kirkwood-$(1).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb
$(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage
cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb >> $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage
$(call Image/BuildKernel/MkuImage, \
none, 0x8000, 0x8000, \
$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage, \
$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-uImage \
)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs
cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb >> $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs
$(call Image/BuildKernel/MkuImage, \
none, 0x8000, 0x8000, \
$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs, \
$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-uImage-initramfs \
)
endif
endif
endef
define Image/InstallKernel/Template
ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),)
$(INSTALL_DIR) $(TARGET_DIR)/boot
ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_UIMAGE),)
$(CP) $(BIN_DIR)/$(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/
ln -sf $(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/uImage
endif
ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_ZIMAGE),)
$(CP) $(BIN_DIR)/$(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/
ln -sf $(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/zImage
endif
endif
ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_DTB),)
$(INSTALL_DIR) $(TARGET_DIR)/boot
ifneq ($(1),)
$(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/
ln -sf $(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/$(1).dtb
endif
endif
endef
define Image/Build/jffs2-nand-2048-128k
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
bs=2048 conv=sync
endef
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
( \
dd if=$(KDIR)/zImage bs=4096k conv=sync; \
dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
) > $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img
endef
define Image/mkfs/targz
$(TAR) -czpf $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.tar.gz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
endef
define Image/Build/ubifs
ifneq ($($(PROFILE)_UBIFS_OPTS),)
$(CP) $(KDIR)/root.ubifs $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.ubifs
endif
endef
define Image/Build/ubi
ifneq ($($(PROFILE)_UBI_OPTS),)
$(CP) $(KDIR)/root.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.ubi
endif
endef
Image/BuildKernel/Template/Generic=$(call Image/BuildKernel/Template)
Image/InstallKernel/Template/Generic=$(call Image/InstallKernel/Template)
Image/BuildKernel/Template/DOCKSTAR=$(call Image/BuildKernel/Template,dockstar)
Image/InstallKernel/Template/DOCKSTAR=$(call Image/InstallKernel/Template,dockstar)
Image/BuildKernel/Template/IB62X0=$(call Image/BuildKernel/Template,ib62x0)
Image/InstallKernel/Template/IB62X0=$(call Image/InstallKernel/Template,ib62x0)
Image/BuildKernel/Template/ICONNECT=$(call Image/BuildKernel/Template,iconnect)
Image/InstallKernel/Template/ICONNECT=$(call Image/InstallKernel/Template,iconnect)
Image/BuildKernel/Template/POGOE02=$(call Image/BuildKernel/Template,pogo_e02)
Image/InstallKernel/Template/POGOE02=$(call Image/InstallKernel/Template,pogo_e02)
define Image/BuildKernel
$(call Image/BuildKernel/Template/$(PROFILE))
endef
define Image/InstallKernel
$(call Image/InstallKernel/Template/$(PROFILE))
endef
define Image/Build
$(if $(Image/Build/$(1)), \
$(call Image/Build/$(1),$(1)), \
$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
)
endef
$(eval $(call BuildImage))