openwrtv4/target/linux/generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch
Hauke Mehrtens b3f95490b9 kernel: generic: Add kernel 4.14 support
This adds initial support for kernel 4.14 based on the patches for
kernel 4.9.

In the configuration I deactivated some of the new possible security
features like:
CONFIG_REFCOUNT_FULL
CONFIG_SLAB_FREELIST_HARDENED
CONFIG_SOFTLOCKUP_DETECTOR
CONFIG_WARN_ALL_UNSEEDED_RANDOM

And these overlay FS options are also deactivated:
CONFIG_OVERLAY_FS_INDEX
CONFIG_OVERLAY_FS_REDIRECT_DIR

I activated this:
CONFIG_FORTIFY_SOURCE
CONFIG_POSIX_TIMERS
CONFIG_SLAB_MERGE_DEFAULT
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED

I am not sure if I did the porting correct for the following patches:
target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch
target/linux/generic/hack-4.14/220-gc_sections.patch
target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch
target/linux/generic/pending-4.14/305-mips_module_reloc.patch
target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch
target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-16 22:11:19 +01:00

76 lines
2.7 KiB
Diff

From: Alexey Brodkin <abrodkin@synopsys.com>
Subject: usb: Remove annoying warning about bogus URB
When ath9k-htc Wi-Fi dongle is used with generic OHCI controller
infinite stream of warnings appears in debug console like this:
-------------------------->8----------------------
usb 1-1: new full-speed USB device number 2 using ohci-platform
usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size:
51008
------------[ cut here ]------------
WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
usb_submit_urb+0x1b4/0x498()
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
Modules linked in:
CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted
4.4.0-rc4-00017-g00e2d79-dirty #3
Workqueue: events request_firmware_work_func
Stack Trace:
arc_unwind_core.constprop.1+0xa4/0x110
---[ end trace 649ef8c342817fc2 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
usb_submit_urb+0x1b4/0x498()
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
Modules linked in:
CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G W
4.4.0-rc4-00017-g00e2d79-dirty #3
Workqueue: events request_firmware_work_func
Stack Trace:
arc_unwind_core.constprop.1+0xa4/0x110
---[ end trace 649ef8c342817fc3 ]---
------------[ cut here ]------------
-------------------------->8----------------------
There're some discussions in mailing lists proposing to disable
that particular check alltogether and magically all seem to work
fine with muted warning.
Anyways new thread on that regard could be found here:
http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html
Let's see what comes out of that new discussion, hopefully patching
of generic USB stuff won't be required then.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
drivers/usb/core/urb.c | 5 -----
1 file changed, 5 deletions(-)
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -326,9 +326,6 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
*/
int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
{
- static int pipetypes[4] = {
- PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
- };
int xfertype, max;
struct usb_device *dev;
struct usb_host_endpoint *ep;
@@ -443,11 +440,6 @@ int usb_submit_urb(struct urb *urb, gfp_
* cause problems in HCDs if they get it wrong.
*/
- /* Check that the pipe's type matches the endpoint's type */
- if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
- dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
- usb_pipetype(urb->pipe), pipetypes[xfertype]);
-
/* Check against a simple/standard policy */
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
URB_FREE_BUFFER);