openwrtv4/target/linux/brcm2708/patches-4.4/0010-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch
Álvaro Fernández Rojas a8d4d71c41 brcm2708: update to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-07 21:25:10 +02:00

146 lines
4.5 KiB
Diff

From 969dc44a700e1be13c3f80445d40c1fe51cc4370 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 24 Feb 2015 13:40:50 +0000
Subject: [PATCH 010/232] pinctrl-bcm2835: Fix interrupt handling for GPIOs
28-31 and 46-53
Contrary to the documentation, the BCM2835 GPIO controller actually has
four interrupt lines - one each for the three IRQ groups and one common. Rather
confusingly, the GPIO interrupt groups don't correspond directly with the GPIO
control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and
46-53 GPIO2.
Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is
cleaner to split out a function to process the interrupts for a single GPIO
bank.
This bug has only just been observed because GPIOs above 27 can only be
accessed on an old Raspberry Pi with the optional P5 header fitted, where
the pins are often used for I2S instead.
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 51 ++++++++++++++++++++++++++---------
1 file changed, 39 insertions(+), 12 deletions(-)
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -47,6 +47,7 @@
#define MODULE_NAME "pinctrl-bcm2835"
#define BCM2835_NUM_GPIOS 54
#define BCM2835_NUM_BANKS 2
+#define BCM2835_NUM_IRQS 3
#define BCM2835_PIN_BITMAP_SZ \
DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
@@ -88,13 +89,13 @@ enum bcm2835_pinconf_pull {
struct bcm2835_gpio_irqdata {
struct bcm2835_pinctrl *pc;
- int bank;
+ int irqgroup;
};
struct bcm2835_pinctrl {
struct device *dev;
void __iomem *base;
- int irq[BCM2835_NUM_BANKS];
+ int irq[BCM2835_NUM_IRQS];
/* note: locking assumes each bank will have its own unsigned long */
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
@@ -105,7 +106,7 @@ struct bcm2835_pinctrl {
struct gpio_chip gpio_chip;
struct pinctrl_gpio_range gpio_range;
- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
+ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_IRQS];
spinlock_t irq_lock[BCM2835_NUM_BANKS];
};
@@ -378,17 +379,16 @@ static struct gpio_chip bcm2835_gpio_chi
.can_sleep = false,
};
-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
+static int bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
+ unsigned int bank, u32 mask)
{
- struct bcm2835_gpio_irqdata *irqdata = dev_id;
- struct bcm2835_pinctrl *pc = irqdata->pc;
- int bank = irqdata->bank;
unsigned long events;
unsigned offset;
unsigned gpio;
unsigned int type;
events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+ events &= mask;
events &= pc->enabled_irq_map[bank];
for_each_set_bit(offset, &events, 32) {
gpio = (32 * bank) + offset;
@@ -396,7 +396,30 @@ static irqreturn_t bcm2835_gpio_irq_hand
generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
}
- return events ? IRQ_HANDLED : IRQ_NONE;
+
+ return (events != 0);
+}
+
+static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
+{
+ struct bcm2835_gpio_irqdata *irqdata = dev_id;
+ struct bcm2835_pinctrl *pc = irqdata->pc;
+ int handled = 0;
+
+ switch (irqdata->irqgroup) {
+ case 0: /* IRQ0 covers GPIOs 0-27 */
+ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
+ break;
+ case 1: /* IRQ1 covers GPIOs 28-45 */
+ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000) |
+ bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
+ break;
+ case 2: /* IRQ2 covers GPIOs 46-53 */
+ handled = bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
+ break;
+ }
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
}
static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
@@ -985,8 +1008,6 @@ static int bcm2835_pinctrl_probe(struct
for (i = 0; i < BCM2835_NUM_BANKS; i++) {
unsigned long events;
unsigned offset;
- int len;
- char *name;
/* clear event detection flags */
bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
@@ -1001,10 +1022,15 @@ static int bcm2835_pinctrl_probe(struct
for_each_set_bit(offset, &events, 32)
bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
+ spin_lock_init(&pc->irq_lock[i]);
+ }
+
+ for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+ int len;
+ char *name;
pc->irq[i] = irq_of_parse_and_map(np, i);
pc->irq_data[i].pc = pc;
- pc->irq_data[i].bank = i;
- spin_lock_init(&pc->irq_lock[i]);
+ pc->irq_data[i].irqgroup = i;
len = strlen(dev_name(pc->dev)) + 16;
name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
@@ -1062,6 +1088,7 @@ static struct platform_driver bcm2835_pi
.remove = bcm2835_pinctrl_remove,
.driver = {
.name = MODULE_NAME,
+ .owner = THIS_MODULE,
.of_match_table = bcm2835_pinctrl_match,
},
};