openwrtv4/target/linux/ramips
Felix Fietkau 09b6755946 ramips: limit dictionary size for lzma compression
In some cases, recent builds fail to boot from flash with at least some
MT7621 based devices. The error message is:
"LZMA ERROR 1 - must RESET board to recover"
Booting the same kernel via TFTP works for some reason.

Through testing I figured out that limiting the LZMA dictionary size
seems to prevent these errors

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-03 11:18:39 +02:00
..
base-files ramips: fix wizfi630a swapped lan/wan port 2018-07-02 06:59:31 +02:00
dts ramips: move mt7620n i2c_pins definition to right place 2018-06-28 18:39:57 +02:00
files-4.14/drivers ramips: improve ethernet driver performance with GRO/TSO 2018-06-19 09:45:28 +02:00
image ramips: limit dictionary size for lzma compression 2018-07-03 11:18:39 +02:00
mt76x8 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
mt7620 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
mt7621 ramips: Add support for Mikrotik RouterBOARD RBM33g 2018-06-21 06:54:42 +02:00
patches-4.14 treewide: gpio-export: add error handling 2018-06-28 18:39:57 +02:00
rt288x kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
rt305x ramips: add dwr-512 jboot firmware configuration 2018-04-08 09:51:06 +02:00
rt3883 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00