098f7156cc
This patch adds support for the Airtight C-60.
SOC: Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM: 128 MiB
NOR: MX25L3205D 4MiB
NAND: ST Micro NAND 32MiB 3,3V 8-bit
SW-NET: AR8327N (2 Ports)
WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip
The switch is setup for an accesspoint:
LAN1: (gigabit) is the wan-port.
LAN2: (fast ethernet) is bridged with the br-lan.
Flashing Guide (via initramfs):
1. Connect a PC to the serial port of the C-60.
power up the C-60.
Enter u-boot command prompt:
#> nand erase
#> setenv bootcmd "bootm 0x9f060000"
#> saveenv
#> setenv ipaddr 192.168.1.1
#> setenv netmask 255.255.255.0
#> setenv serverip 192.168.1.100
#> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
#> tftpboot
#> bootm
2. Wait for the C-60 to boot LEDE.
On the root prompt. Enter:
# ubiformat /dev/mtd4
# ubiattach -p /dev/mtd4
3. After that copy the sysupgrade.tar onto the router and run:
# sysupgrade sysupgrade.tar
to flash the image.
Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
83 lines
2.4 KiB
Makefile
83 lines
2.4 KiB
Makefile
define Device/c-60
|
|
DEVICE_TITLE := AirTight C-60
|
|
DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-core kmod-usb2 kmod-ath9k
|
|
BOARDNAME = C-60
|
|
BLOCKSIZE := 64k
|
|
KERNEL_SIZE = 3648k
|
|
IMAGE_SIZE = 32m
|
|
IMAGES := sysupgrade.tar
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi)
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar
|
|
endef
|
|
|
|
TARGET_DEVICES += c-60
|
|
|
|
define Build/MerakiNAND
|
|
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
|
|
-B $(BOARDNAME) -s \
|
|
-i $@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/mr18
|
|
DEVICE_TITLE := Meraki MR18
|
|
DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k
|
|
BOARDNAME = MR18
|
|
BLOCKSIZE := 64k
|
|
CONSOLE = ttyS0,115200
|
|
MTDPARTS = ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro
|
|
IMAGES := sysupgrade.tar
|
|
KERNEL := kernel-bin | patch-cmdline | MerakiNAND
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar
|
|
endef
|
|
TARGET_DEVICES += mr18
|
|
|
|
define Build/MerakiNAND-old
|
|
-$(STAGING_DIR_HOST)/bin/mkmerakifw-old \
|
|
-B $(BOARDNAME) -s \
|
|
-i $@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/z1
|
|
DEVICE_TITLE := Meraki Z1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-spi-gpio kmod-ath9k kmod-owl-loader
|
|
BOARDNAME = Z1
|
|
BLOCKSIZE := 64k
|
|
CONSOLE = ttyS0,115200
|
|
MTDPARTS = ar934x-nfc:128K(loader1)ro,8064K(kernel),128K(loader2)ro,8064K(recovery),114560K(ubi),128K(origcaldata)ro
|
|
IMAGES := sysupgrade.tar
|
|
KERNEL := kernel-bin | patch-cmdline | MerakiNAND-old
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND-old
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar
|
|
endef
|
|
|
|
TARGET_DEVICES += z1
|
|
|
|
define LegacyDevice/R6100
|
|
DEVICE_TITLE := NETGEAR R6100
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
|
|
endef
|
|
LEGACY_DEVICES += R6100
|
|
|
|
define LegacyDevice/WNDR3700V4
|
|
DEVICE_TITLE := NETGEAR WNDR3700v4
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
|
|
endef
|
|
LEGACY_DEVICES += WNDR3700V4
|
|
|
|
define LegacyDevice/WNDR4300V1
|
|
DEVICE_TITLE := NETGEAR WNDR4300v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
|
|
endef
|
|
LEGACY_DEVICES += WNDR4300V1
|
|
|
|
define LegacyDevice/NBG6716
|
|
DEVICE_TITLE := Zyxel NBG 6716
|
|
DEVICE_PACKAGES := kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
|
|
endef
|
|
LEGACY_DEVICES += NBG6716
|