openwrtv4/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch
John Crispin 95544f33dd ar71xx: add kernel support for the OpenMesh MR900 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43258
2014-11-14 16:54:07 +00:00

39 lines
1.4 KiB
Diff

--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -654,6 +654,16 @@ config ATH79_MACH_CAP4200AG
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_MR900
+ bool "OpenMesh MR900 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_EAP7660D
bool "Senao EAP7660D support"
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
+obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -65,6 +65,7 @@ enum ath79_mach_type {
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
ATH79_MACH_MR600, /* OpenMesh MR600 */
+ ATH79_MACH_MR900, /* OpenMesh MR900 */
ATH79_MACH_MYNET_N600, /* WD My Net N600 */
ATH79_MACH_MYNET_N750, /* WD My Net N750 */
ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */