8f4dfadd5a
Use diag.sh version used for other targets supporting different leds for the different boot states. The existing led sequences should be the same as before. Signed-off-by: Mathias Kresin <dev@kresin.me>
171 lines
2.8 KiB
Text
171 lines
2.8 KiB
Text
/dts-v1/;
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
compatible = "tplink,re350-v1", "mediatek,mt7621-soc";
|
|
model = "TP-LINK RE350 v1";
|
|
|
|
aliases {
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x4000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,57600";
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power: power {
|
|
label = "re350-v1:blue:power";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi2g {
|
|
label = "re350-v1:blue:wifi2G";
|
|
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi5g {
|
|
label = "re350-v1:blue:wifi5G";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps_r {
|
|
label = "re350-v1:red:wps";
|
|
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wps_b {
|
|
label = "re350-v1:blue:wps";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
eth {
|
|
label = "re350-v1:green:eth_act";
|
|
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
eth2 {
|
|
label = "re350-v1:green:eth_link";
|
|
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
poll-interval = <20>;
|
|
|
|
led {
|
|
label = "led";
|
|
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
power {
|
|
label = "power";
|
|
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
w25q64@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
m25p,chunked-io = <32>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
label = "firmware";
|
|
reg = <0x20000 0x5e0000>;
|
|
};
|
|
|
|
config: partition@600000 {
|
|
label = "config";
|
|
reg = <0x600000 0x50000>;
|
|
read-only;
|
|
};
|
|
|
|
radio: partition@7f0000 {
|
|
label = "radio";
|
|
reg = <0x7f0000 0x10000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
mt76@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&radio 0>;
|
|
mtd-mac-address = <&config 0x10008>;
|
|
mtd-mac-address-increment = <1>;
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
mt76@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&radio 0x8000>;
|
|
ieee80211-freq-limit = <5000000 6000000>;
|
|
mtd-mac-address = <&config 0x10008>;
|
|
mtd-mac-address-increment = <2>;
|
|
};
|
|
};
|
|
|
|
ðernet {
|
|
mtd-mac-address = <&config 0x10008>;
|
|
};
|
|
|
|
&pinctrl {
|
|
state_default: pinctrl0 {
|
|
gpio {
|
|
ralink,group = "rgmii2", "wdt";
|
|
ralink,function = "gpio";
|
|
};
|
|
};
|
|
};
|