02629d8f87
Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463
245 lines
6.7 KiB
Diff
245 lines
6.7 KiB
Diff
From 5cf343c60d7557aefb468603065cac5062f11b8d Mon Sep 17 00:00:00 2001
|
|
From: Stephen Boyd <sboyd@codeaurora.org>
|
|
Date: Fri, 30 May 2014 16:36:11 -0700
|
|
Subject: [PATCH 172/182] cpufreq: Add a cpufreq-krait based on cpufreq-cpu0
|
|
|
|
Krait processors have individual clocks for each CPU that can
|
|
scale independently from one another. cpufreq-cpu0 is fairly
|
|
close to this, but assumes that there is only one clock for all
|
|
CPUs. Add a driver to support the Krait configuration.
|
|
|
|
TODO: Merge into cpufreq-cpu0? Or make generic?
|
|
|
|
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
---
|
|
drivers/cpufreq/Kconfig | 13 +++
|
|
drivers/cpufreq/Makefile | 1 +
|
|
drivers/cpufreq/cpufreq-krait.c | 190 +++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 204 insertions(+)
|
|
create mode 100644 drivers/cpufreq/cpufreq-krait.c
|
|
|
|
--- a/drivers/cpufreq/Kconfig
|
|
+++ b/drivers/cpufreq/Kconfig
|
|
@@ -194,6 +194,19 @@ config GENERIC_CPUFREQ_CPU0
|
|
|
|
If in doubt, say N.
|
|
|
|
+config GENERIC_CPUFREQ_KRAIT
|
|
+ tristate "Krait cpufreq driver"
|
|
+ depends on HAVE_CLK && OF
|
|
+ # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y:
|
|
+ depends on !CPU_THERMAL || THERMAL
|
|
+ select PM_OPP
|
|
+ help
|
|
+ This adds a generic cpufreq driver for CPU0 frequency management.
|
|
+ It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
|
|
+ systems which share clock and voltage across all CPUs.
|
|
+
|
|
+ If in doubt, say N.
|
|
+
|
|
menu "x86 CPU frequency scaling drivers"
|
|
depends on X86
|
|
source "drivers/cpufreq/Kconfig.x86"
|
|
--- a/drivers/cpufreq/Makefile
|
|
+++ b/drivers/cpufreq/Makefile
|
|
@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)
|
|
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
|
|
|
|
obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o
|
|
+obj-$(CONFIG_GENERIC_CPUFREQ_KRAIT) += cpufreq-krait.o
|
|
|
|
##################################################################################
|
|
# x86 drivers.
|
|
--- /dev/null
|
|
+++ b/drivers/cpufreq/cpufreq-krait.c
|
|
@@ -0,0 +1,190 @@
|
|
+/*
|
|
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
|
+ *
|
|
+ * The OPP code in function krait_set_target() is reused from
|
|
+ * drivers/cpufreq/omap-cpufreq.c
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/cpu.h>
|
|
+#include <linux/cpu_cooling.h>
|
|
+#include <linux/cpufreq.h>
|
|
+#include <linux/cpumask.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/pm_opp.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/thermal.h>
|
|
+
|
|
+static unsigned int transition_latency;
|
|
+
|
|
+static struct device *cpu_dev;
|
|
+static DEFINE_PER_CPU(struct clk *, krait_cpu_clks);
|
|
+static struct cpufreq_frequency_table *freq_table;
|
|
+static struct thermal_cooling_device *cdev;
|
|
+
|
|
+static int krait_set_target(struct cpufreq_policy *policy, unsigned int index)
|
|
+{
|
|
+ unsigned long volt = 0, volt_old = 0;
|
|
+ unsigned int old_freq, new_freq;
|
|
+ long freq_Hz, freq_exact;
|
|
+ int ret;
|
|
+ struct clk *cpu_clk;
|
|
+
|
|
+ cpu_clk = per_cpu(krait_cpu_clks, policy->cpu);
|
|
+
|
|
+ freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
|
|
+ if (freq_Hz <= 0)
|
|
+ freq_Hz = freq_table[index].frequency * 1000;
|
|
+
|
|
+ freq_exact = freq_Hz;
|
|
+ new_freq = freq_Hz / 1000;
|
|
+ old_freq = clk_get_rate(cpu_clk) / 1000;
|
|
+
|
|
+ pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
|
|
+ old_freq / 1000, volt_old ? volt_old / 1000 : -1,
|
|
+ new_freq / 1000, volt ? volt / 1000 : -1);
|
|
+
|
|
+ ret = clk_set_rate(cpu_clk, freq_exact);
|
|
+ if (ret)
|
|
+ pr_err("failed to set clock rate: %d\n", ret);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int krait_cpufreq_init(struct cpufreq_policy *policy)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ policy->clk = per_cpu(krait_cpu_clks, policy->cpu);
|
|
+
|
|
+ ret = cpufreq_table_validate_and_show(policy, freq_table);
|
|
+ if (ret) {
|
|
+ pr_err("%s: invalid frequency table: %d\n", __func__, ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ policy->cpuinfo.transition_latency = transition_latency;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct cpufreq_driver krait_cpufreq_driver = {
|
|
+ .flags = CPUFREQ_STICKY,
|
|
+ .verify = cpufreq_generic_frequency_table_verify,
|
|
+ .target_index = krait_set_target,
|
|
+ .get = cpufreq_generic_get,
|
|
+ .init = krait_cpufreq_init,
|
|
+ .name = "generic_krait",
|
|
+ .attr = cpufreq_generic_attr,
|
|
+};
|
|
+
|
|
+static int krait_cpufreq_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device_node *np;
|
|
+ int ret;
|
|
+ unsigned int cpu;
|
|
+ struct device *dev;
|
|
+ struct clk *clk;
|
|
+
|
|
+ cpu_dev = get_cpu_device(0);
|
|
+ if (!cpu_dev) {
|
|
+ pr_err("failed to get krait device\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ np = of_node_get(cpu_dev->of_node);
|
|
+ if (!np) {
|
|
+ pr_err("failed to find krait node\n");
|
|
+ return -ENOENT;
|
|
+ }
|
|
+
|
|
+ for_each_possible_cpu(cpu) {
|
|
+ dev = get_cpu_device(cpu);
|
|
+ if (!dev) {
|
|
+ pr_err("failed to get krait device\n");
|
|
+ ret = -ENOENT;
|
|
+ goto out_put_node;
|
|
+ }
|
|
+ per_cpu(krait_cpu_clks, cpu) = clk = devm_clk_get(dev, NULL);
|
|
+ if (IS_ERR(clk)) {
|
|
+ ret = PTR_ERR(clk);
|
|
+ goto out_put_node;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ ret = of_init_opp_table(cpu_dev);
|
|
+ if (ret) {
|
|
+ pr_err("failed to init OPP table: %d\n", ret);
|
|
+ goto out_put_node;
|
|
+ }
|
|
+
|
|
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
|
|
+ if (ret) {
|
|
+ pr_err("failed to init cpufreq table: %d\n", ret);
|
|
+ goto out_put_node;
|
|
+ }
|
|
+
|
|
+ if (of_property_read_u32(np, "clock-latency", &transition_latency))
|
|
+ transition_latency = CPUFREQ_ETERNAL;
|
|
+
|
|
+ ret = cpufreq_register_driver(&krait_cpufreq_driver);
|
|
+ if (ret) {
|
|
+ pr_err("failed register driver: %d\n", ret);
|
|
+ goto out_free_table;
|
|
+ }
|
|
+ of_node_put(np);
|
|
+
|
|
+ /*
|
|
+ * For now, just loading the cooling device;
|
|
+ * thermal DT code takes care of matching them.
|
|
+ */
|
|
+ for_each_possible_cpu(cpu) {
|
|
+ dev = get_cpu_device(cpu);
|
|
+ np = of_node_get(dev->of_node);
|
|
+ if (of_find_property(np, "#cooling-cells", NULL)) {
|
|
+ cdev = of_cpufreq_cooling_register(np, cpumask_of(cpu));
|
|
+ if (IS_ERR(cdev))
|
|
+ pr_err("running cpufreq without cooling device: %ld\n",
|
|
+ PTR_ERR(cdev));
|
|
+ }
|
|
+ of_node_put(np);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_free_table:
|
|
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
|
|
+out_put_node:
|
|
+ of_node_put(np);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int krait_cpufreq_remove(struct platform_device *pdev)
|
|
+{
|
|
+ cpufreq_cooling_unregister(cdev);
|
|
+ cpufreq_unregister_driver(&krait_cpufreq_driver);
|
|
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver krait_cpufreq_platdrv = {
|
|
+ .driver = {
|
|
+ .name = "cpufreq-krait",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .probe = krait_cpufreq_probe,
|
|
+ .remove = krait_cpufreq_remove,
|
|
+};
|
|
+module_platform_driver(krait_cpufreq_platdrv);
|
|
+
|
|
+MODULE_DESCRIPTION("Krait CPUfreq driver");
|
|
+MODULE_LICENSE("GPL v2");
|