From ce27d8ba202467a2b811de711ed95d17b2bb27e5 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Wed, 16 Mar 2016 12:25:02 -0700 Subject: [PATCH 400/423] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma Also added check for an error condition in bcm2835_dma_create_cb_chain that showed up during development of this patch. Tested using dmatest for all enabled channels. Signed-off-by: Martin Sperl Reviewed-by: Eric Anholt Signed-off-by: Eric Anholt Signed-off-by: Vinod Koul --- drivers/dma/bcm2835-dma.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -310,6 +310,9 @@ static struct bcm2835_desc *bcm2835_dma_ struct bcm2835_cb_entry *cb_entry; struct bcm2835_dma_cb *control_block; + if (!frames) + return NULL; + /* allocate and setup the descriptor. */ d = kzalloc(sizeof(*d) + frames * sizeof(struct bcm2835_cb_entry), gfp); @@ -597,6 +600,34 @@ static void bcm2835_dma_issue_pending(st spin_unlock_irqrestore(&c->vc.lock, flags); } +struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_memcpy( + struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, + size_t len, unsigned long flags) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + struct bcm2835_desc *d; + u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC; + u32 extra = BCM2835_DMA_INT_EN | BCM2835_DMA_WAIT_RESP; + size_t max_len = bcm2835_dma_max_frame_length(c); + size_t frames; + + /* if src, dst or len is not given return with an error */ + if (!src || !dst || !len) + return NULL; + + /* calculate number of frames */ + frames = bcm2835_dma_frames_for_length(len, max_len); + + /* allocate the CB chain - this also fills in the pointers */ + d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false, + info, extra, frames, + src, dst, len, 0, GFP_KERNEL); + if (!d) + return NULL; + + return vchan_tx_prep(&c->vc, &d->vd, flags); +} + static struct dma_async_tx_descriptor *bcm2835_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, @@ -880,17 +911,20 @@ static int bcm2835_dma_probe(struct plat dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask); dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); + dma_cap_set(DMA_MEMCPY, od->ddev.cap_mask); od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources; od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources; od->ddev.device_tx_status = bcm2835_dma_tx_status; od->ddev.device_issue_pending = bcm2835_dma_issue_pending; od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic; od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg; + od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy; od->ddev.device_config = bcm2835_dma_slave_config; od->ddev.device_terminate_all = bcm2835_dma_terminate_all; od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); - od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) | + BIT(DMA_MEM_TO_MEM); od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; od->ddev.dev = &pdev->dev; INIT_LIST_HEAD(&od->ddev.channels);