/dts-v1/; #include "danube.dtsi" #include / { compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube"; model = "Arcor 803"; chosen { bootargs = "console=ttyLTQ0,115200"; }; aliases { led-boot = &power_red; led-failsafe = &power_blue; led-running = &power_red; led-dsl = &internet_red; led-usb = &umts; led-wifi = &wifi; }; memory@0 { reg = <0x0 0x4000000>; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; wps { label = "wps"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code = ; }; restart { label = "restart"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; linux,code = ; }; dsl { label = "dsl"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 28 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio-leds { compatible = "gpio-leds"; power_blue: power1 { label = "arv752dpw22:blue:power"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; internet_red: internet { label = "arv752dpw22:red:internet"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; message { label = "arv752dpw22:red:message"; gpios = <&gpio 5 GPIO_ACTIVE_LOW>; }; power_red: power { label = "arv752dpw22:red:power"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; default-state = "keep"; }; voice1 { label = "arv752dpw22:red:voice"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; umts: umts { label = "arv752dpw22:red:umts"; gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; }; wifi: wifi { label = "arv752dpw22:red:wifi"; gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; }; fxs1 { label = "arv752dpw22:green:tae-n"; gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; }; fxs2 { label = "arv752dpw22:green:tae-u"; gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; }; fxo { label = "arv752dpw22:green:isdn"; gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; }; internet2 { label = "arv752dpw22:blue:internet"; gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; }; voice2 { label = "arv752dpw22:blue:voice"; gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; }; eth1 { label = "arv752dpw22:green:lan1"; gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>; }; eth2 { label = "arv752dpw22:green:lan2"; gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>; }; eth3 { label = "arv752dpw22:green:lan3"; gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>; }; eth4 { label = "arv752dpw22:green:lan4"; gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>; }; }; }; &gpio { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { ebu { lantiq,groups = "ebu cs1"; lantiq,function = "ebu"; }; exin { lantiq,groups = "exin1"; lantiq,function = "exin"; lantiq,pull = <2>; lantiq,output = <0>; }; pci_in { lantiq,groups = "req1"; lantiq,function = "pci"; lantiq,pull = <2>; lantiq,output = <0>; }; pci_out { lantiq,groups = "gnt1"; lantiq,function = "pci"; lantiq,open-drain = <1>; lantiq,output = <1>; }; pci_rst { lantiq,pins = "io21"; lantiq,open-drain = <1>; lantiq,output = <1>; }; leds { lantiq,pins = "io3", "io5", "io6", "io8"; lantiq,open-drain = <1>; lantiq,output = <1>; }; buttons { lantiq,pins = "io11", "io12", "io13", "io28"; lantiq,pull = <2>; lantiq,output = <0>; }; }; }; &gpiomm { status = "okay"; lantiq,shadow = <3>; }; &gsw { phy-mode = "mii"; mtd-mac-address = <&boardconfig 0x16>; }; &localbus { nor@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x800000>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x00000 0x30000>; read-only; }; partition@10000 { label = "uboot_env"; reg = <0x30000 0x10000>; read-only; }; partition@20000 { label = "firmware"; reg = <0x40000 0x7b0000>; }; boardconfig: partition@7f0000 { label = "board_config"; reg = <0x7f0000 0x10000>; read-only; }; }; }; }; &pci0 { status = "okay"; lantiq,external-clock; interrupt-map = < 0x7000 0 0 1 &icu0 30 0x7800 0 0 1 &icu0 135 0x7800 0 0 2 &icu0 135 0x7800 0 0 3 &icu0 135 >; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; req-mask = <0x3>; wifi@1814,3592 { compatible = "pci1814,3592"; reg = <0x7000 0 0 0 0>; ralink,mtd-eeprom = <&boardconfig 0x410>; ralink,mtd-eeprom-swap; mtd-mac-address = <&boardconfig 0x16>; }; }; &usb { status = "okay"; gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>; }; &vmmc { status = "okay"; gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; };