/dts-v1/; #include "rt5350.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "dlink,dcs-930l-b1", "ralink,rt5350-soc"; model = "D-Link DCS-930L B1"; gpio-leds { compatible = "gpio-leds"; power { label = "dcs-930l-b1:red:power"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; }; wps { label = "dcs-930l-b1:blue:wps"; gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "jtag", "uartf", "led"; ralink,function = "gpio"; }; }; }; ðernet { mtd-mac-address = <&factory 0x4>; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { ralink,mtd-eeprom = <&factory 0>; }; &ehci { status = "okay"; }; &ohci { status = "okay"; };