/dts-v1/; #include "rt3352.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "dlink,dir-615-h1", "ralink,rt3352-soc"; model = "D-Link DIR-615 H1"; gpio-leds { compatible = "gpio-leds"; status { label = "dir-615-h1:amber:status"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; status2 { label = "dir-615-h1:green:status"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; wan { label = "dir-615-h1:amber:wan"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; wan2 { label = "dir-615-h1:green:wan"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; wps { label = "dir-615-h1:blue:wps"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "jtag", "uartf"; ralink,function = "gpio"; }; }; }; ðernet { mtd-mac-address = <&factory 0x28>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &mdio_pins>; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { ralink,mtd-eeprom = <&factory 0>; };