/dts-v1/; #include "bcm6358.dtsi" #include <dt-bindings/input/input.h> / { model = "Telsey CPVA642-type (CPA-ZNTE60T)"; compatible = "telsey,cpva642", "brcm,bcm6358"; chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; debounce-interval = <60>; reset { label = "reset"; gpios = <&pinctrl 36 1>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; gpios = <&pinctrl 37 0>; linux,code = <KEY_WPS_BUTTON>; }; }; gpio-leds { compatible = "gpio-leds"; eth_green { label = "CPVA642:green:ether"; gpios = <&pinctrl 1 1>; }; phone2_green { label = "CPVA642:green:phone2"; gpios = <&pinctrl 2 1>; }; usb_green { label = "CPVA642:green:usb"; gpios = <&pinctrl 3 1>; }; phone1_green { label = "CPVA642:green:phone1"; gpios = <&pinctrl 4 1>; }; wifi_red { label = "CPVA642:red:wifi"; gpios = <&pinctrl 6 1>; }; link_red { label = "CPVA642:red:link"; gpios = <&pinctrl 9 1>; }; link_green { label = "CPVA642:green:link"; gpios = <&pinctrl 10 1>; }; power_green { label = "CPVA642:green:power"; gpios = <&pinctrl 11 1>; default-state = "on"; }; power_red { label = "CPVA642:red:power"; gpios = <&pinctrl 14 1>; }; wifi_green { label = "CPVA642:green:wifi"; gpios = <&pinctrl 28 0>; }; }; }; &pflash { status = "ok"; linux,part-probe = "bcm63xxpart"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; cfe@0 { label = "CFE"; reg = <0x000000 0x010000>; read-only; }; linux@10000 { label = "linux"; reg = <0x010000 0x7e0000>; compatible = "brcm,bcm963xx-imagetag"; }; nvram@7f0000 { label = "nvram"; reg = <0x7f0000 0x010000>; }; }; }; &uart0 { status = "ok"; };