--- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -135,6 +135,10 @@ config MTD_BCM47XXSFLASH registered by bcma as platform devices. This enables driver for serial flash memories (only read-only mode is implemented). +config MTD_AR2315 + tristate "Atheros AR2315+ SPI Flash support" + depends on ATHEROS_AR2315 + config MTD_SLRAM tristate "Uncached system RAM" help --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_NAND_OMAP_BCH) += elm.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o +obj-$(CONFIG_MTD_AR2315) += ar2315.o obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o --- /dev/null +++ b/drivers/mtd/devices/ar2315.c @@ -0,0 +1,536 @@ + +/* + * MTD driver for the SPI Flash Memory support on Atheros AR2315 + * + * Copyright (c) 2005-2006 Atheros Communications Inc. + * Copyright (C) 2006-2007 FON Technology, SL. + * Copyright (C) 2006-2007 Imre Kaloz + * Copyright (C) 2006-2009 Felix Fietkau + * Copyright (C) 2012 Alexandros C. Couloumbis + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ar2315_spiflash.h" + + +#define SPIFLASH "spiflash: " +#define busy_wait(_priv, _condition, _wait) do { \ + while (_condition) { \ + spin_unlock_bh(&_priv->lock); \ + if (_wait > 1) \ + msleep(_wait); \ + else if ((_wait == 1) && need_resched()) \ + schedule(); \ + else \ + udelay(1); \ + spin_lock_bh(&_priv->lock); \ + } \ +} while (0) + +enum { + FLASH_NONE, + FLASH_1MB, + FLASH_2MB, + FLASH_4MB, + FLASH_8MB, + FLASH_16MB, +}; + +/* Flash configuration table */ +struct flashconfig { + u32 byte_cnt; + u32 sector_cnt; + u32 sector_size; +}; + +const struct flashconfig flashconfig_tbl[] = { + [FLASH_NONE] = { 0, 0, 0}, + [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, + STM_1MB_SECTOR_SIZE}, + [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, + STM_2MB_SECTOR_SIZE}, + [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, + STM_4MB_SECTOR_SIZE}, + [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, + STM_8MB_SECTOR_SIZE}, + [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, + STM_16MB_SECTOR_SIZE} +}; + +/* Mapping of generic opcodes to STM serial flash opcodes */ +enum { + SPI_WRITE_ENABLE, + SPI_WRITE_DISABLE, + SPI_RD_STATUS, + SPI_WR_STATUS, + SPI_RD_DATA, + SPI_FAST_RD_DATA, + SPI_PAGE_PROGRAM, + SPI_SECTOR_ERASE, + SPI_BULK_ERASE, + SPI_DEEP_PWRDOWN, + SPI_RD_SIG, +}; + +struct opcodes { + __u16 code; + __s8 tx_cnt; + __s8 rx_cnt; +}; + +const struct opcodes stm_opcodes[] = { + [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0}, + [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0}, + [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1}, + [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0}, + [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4}, + [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0}, + [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0}, + [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0}, + [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0}, + [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0}, + [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1}, +}; + +/* Driver private data structure */ +struct spiflash_priv { + struct mtd_info mtd; + void __iomem *readaddr; /* memory mapped data for read */ + void __iomem *mmraddr; /* memory mapped register space */ + wait_queue_head_t wq; + spinlock_t lock; + int state; +}; + +#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd) + +enum { + FL_READY, + FL_READING, + FL_ERASING, + FL_WRITING +}; + +/*****************************************************************************/ + +static u32 +spiflash_read_reg(struct spiflash_priv *priv, int reg) +{ + return ioread32(priv->mmraddr + reg); +} + +static void +spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data) +{ + iowrite32(data, priv->mmraddr + reg); +} + +static u32 +spiflash_wait_busy(struct spiflash_priv *priv) +{ + u32 reg; + + busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) & + SPI_CTL_BUSY, 0); + return reg; +} + +static u32 +spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr) +{ + const struct opcodes *op; + u32 reg, mask; + + op = &stm_opcodes[opcode]; + reg = spiflash_wait_busy(priv); + spiflash_write_reg(priv, SPI_FLASH_OPCODE, + ((u32) op->code) | (addr << 8)); + + reg &= ~SPI_CTL_TX_RX_CNT_MASK; + reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4); + + spiflash_write_reg(priv, SPI_FLASH_CTL, reg); + spiflash_wait_busy(priv); + + if (!op->rx_cnt) + return 0; + + reg = spiflash_read_reg(priv, SPI_FLASH_DATA); + + switch (op->rx_cnt) { + case 1: + mask = 0x000000ff; + break; + case 2: + mask = 0x0000ffff; + break; + case 3: + mask = 0x00ffffff; + break; + default: + mask = 0xffffffff; + break; + } + reg &= mask; + + return reg; +} + + +/* + * Probe SPI flash device + * Function returns 0 for failure. + * and flashconfig_tbl array index for success. + */ +static int +spiflash_probe_chip(struct spiflash_priv *priv) +{ + u32 sig; + int flash_size; + + /* Read the signature on the flash device */ + spin_lock_bh(&priv->lock); + sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0); + spin_unlock_bh(&priv->lock); + + switch (sig) { + case STM_8MBIT_SIGNATURE: + flash_size = FLASH_1MB; + break; + case STM_16MBIT_SIGNATURE: + flash_size = FLASH_2MB; + break; + case STM_32MBIT_SIGNATURE: + flash_size = FLASH_4MB; + break; + case STM_64MBIT_SIGNATURE: + flash_size = FLASH_8MB; + break; + case STM_128MBIT_SIGNATURE: + flash_size = FLASH_16MB; + break; + default: + pr_warn(SPIFLASH "Read of flash device signature failed!\n"); + return 0; + } + + return flash_size; +} + + +/* wait until the flash chip is ready and grab a lock */ +static int spiflash_wait_ready(struct spiflash_priv *priv, int state) +{ + DECLARE_WAITQUEUE(wait, current); + +retry: + spin_lock_bh(&priv->lock); + if (priv->state != FL_READY) { + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&priv->wq, &wait); + spin_unlock_bh(&priv->lock); + schedule(); + remove_wait_queue(&priv->wq, &wait); + + if (signal_pending(current)) + return 0; + + goto retry; + } + priv->state = state; + + return 1; +} + +static inline void spiflash_done(struct spiflash_priv *priv) +{ + priv->state = FL_READY; + spin_unlock_bh(&priv->lock); + wake_up(&priv->wq); +} + +static void +spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout) +{ + busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) & + SPI_STATUS_WIP, timeout); + spiflash_done(priv); +} + + + +static int +spiflash_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct spiflash_priv *priv = to_spiflash(mtd); + const struct opcodes *op; + u32 temp, reg; + + if (instr->addr + instr->len > mtd->size) + return -EINVAL; + + if (!spiflash_wait_ready(priv, FL_ERASING)) + return -EINTR; + + spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); + reg = spiflash_wait_busy(priv); + + op = &stm_opcodes[SPI_SECTOR_ERASE]; + temp = ((u32)instr->addr << 8) | (u32)(op->code); + spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp); + + reg &= ~SPI_CTL_TX_RX_CNT_MASK; + reg |= op->tx_cnt | SPI_CTL_START; + spiflash_write_reg(priv, SPI_FLASH_CTL, reg); + + spiflash_wait_complete(priv, 20); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return 0; +} + +static int +spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf) +{ + struct spiflash_priv *priv = to_spiflash(mtd); + + if (!len) + return 0; + + if (from + len > mtd->size) + return -EINVAL; + + *retlen = len; + + if (!spiflash_wait_ready(priv, FL_READING)) + return -EINTR; + + memcpy_fromio(buf, priv->readaddr + from, len); + spiflash_done(priv); + + return 0; +} + +static int +spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u8 *buf) +{ + struct spiflash_priv *priv = to_spiflash(mtd); + u32 opcode, bytes_left; + + *retlen = 0; + + if (!len) + return 0; + + if (to + len > mtd->size) + return -EINVAL; + + bytes_left = len; + + do { + u32 read_len, reg, page_offset, spi_data = 0; + + read_len = min(bytes_left, sizeof(u32)); + + /* 32-bit writes cannot span across a page boundary + * (256 bytes). This types of writes require two page + * program operations to handle it correctly. The STM part + * will write the overflow data to the beginning of the + * current page as opposed to the subsequent page. + */ + page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len; + + if (page_offset > STM_PAGE_SIZE) + read_len -= (page_offset - STM_PAGE_SIZE); + + if (!spiflash_wait_ready(priv, FL_WRITING)) + return -EINTR; + + spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); + spi_data = 0; + switch (read_len) { + case 4: + spi_data |= buf[3] << 24; + /* fall through */ + case 3: + spi_data |= buf[2] << 16; + /* fall through */ + case 2: + spi_data |= buf[1] << 8; + /* fall through */ + case 1: + spi_data |= buf[0] & 0xff; + break; + default: + break; + } + + spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data); + opcode = stm_opcodes[SPI_PAGE_PROGRAM].code | + (to & 0x00ffffff) << 8; + spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode); + + reg = spiflash_read_reg(priv, SPI_FLASH_CTL); + reg &= ~SPI_CTL_TX_RX_CNT_MASK; + reg |= (read_len + 4) | SPI_CTL_START; + spiflash_write_reg(priv, SPI_FLASH_CTL, reg); + + spiflash_wait_complete(priv, 1); + + bytes_left -= read_len; + to += read_len; + buf += read_len; + + *retlen += read_len; + } while (bytes_left != 0); + + return 0; +} + + +#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS +static const char * const part_probe_types[] = { + "cmdlinepart", "RedBoot", "MyLoader", NULL +}; +#endif + + +static int +spiflash_probe(struct platform_device *pdev) +{ + struct spiflash_priv *priv; + struct mtd_info *mtd; + struct resource *res; + int index; + int result = 0; + + priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL); + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->wq); + priv->state = FL_READY; + mtd = &priv->mtd; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "No MMR resource found\n"); + goto error; + } + + priv->mmraddr = ioremap_nocache(res->start, resource_size(res)); + if (!priv->mmraddr) { + dev_warn(&pdev->dev, SPIFLASH "Failed to map flash device\n"); + goto error; + } + + index = spiflash_probe_chip(priv); + if (!index) { + dev_warn(&pdev->dev, SPIFLASH "Found no flash device\n"); + goto error; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "No flash readmem resource found\n"); + goto error; + } + + priv->readaddr = ioremap_nocache(res->start, + flashconfig_tbl[index].byte_cnt); + if (!priv->readaddr) { + dev_warn(&pdev->dev, SPIFLASH "Failed to map flash device\n"); + goto error; + } + + platform_set_drvdata(pdev, priv); + mtd->name = "spiflash"; + mtd->type = MTD_NORFLASH; + mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); + mtd->size = flashconfig_tbl[index].byte_cnt; + mtd->erasesize = flashconfig_tbl[index].sector_size; + mtd->writesize = 1; + mtd->numeraseregions = 0; + mtd->eraseregions = NULL; + mtd->_erase = spiflash_erase; + mtd->_read = spiflash_read; + mtd->_write = spiflash_write; + mtd->owner = THIS_MODULE; + + dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10); + +#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS + /* parse redboot partitions */ + + result = mtd_device_parse_register(mtd, part_probe_types, + NULL, NULL, 0); +#endif + + return result; + +error: + if (priv->mmraddr) + iounmap(priv->mmraddr); + kfree(priv); + return -ENXIO; +} + +static int +spiflash_remove(struct platform_device *pdev) +{ + struct spiflash_priv *priv = platform_get_drvdata(pdev); + struct mtd_info *mtd = &priv->mtd; + + mtd_device_unregister(mtd); + iounmap(priv->mmraddr); + iounmap(priv->readaddr); + kfree(priv); + + return 0; +} + +struct platform_driver spiflash_driver = { + .driver.name = "spiflash", + .probe = spiflash_probe, + .remove = spiflash_remove, +}; + +int __init +spiflash_init(void) +{ + return platform_driver_register(&spiflash_driver); +} + +void __exit +spiflash_exit(void) +{ + return platform_driver_unregister(&spiflash_driver); +} + +module_init(spiflash_init); +module_exit(spiflash_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc"); +MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); + --- /dev/null +++ b/drivers/mtd/devices/ar2315_spiflash.h @@ -0,0 +1,116 @@ +/* + * Atheros AR2315 SPI Flash Memory support header file. + * + * Copyright (c) 2005, Atheros Communications Inc. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006-2009 Felix Fietkau + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __AR2315_SPIFLASH_H +#define __AR2315_SPIFLASH_H + +#define STM_PAGE_SIZE 256 + +#define SFI_WRITE_BUFFER_SIZE 4 +#define SFI_FLASH_ADDR_MASK 0x00ffffff + +#define STM_8MBIT_SIGNATURE 0x13 +#define STM_M25P80_BYTE_COUNT 1048576 +#define STM_M25P80_SECTOR_COUNT 16 +#define STM_M25P80_SECTOR_SIZE 0x10000 + +#define STM_16MBIT_SIGNATURE 0x14 +#define STM_M25P16_BYTE_COUNT 2097152 +#define STM_M25P16_SECTOR_COUNT 32 +#define STM_M25P16_SECTOR_SIZE 0x10000 + +#define STM_32MBIT_SIGNATURE 0x15 +#define STM_M25P32_BYTE_COUNT 4194304 +#define STM_M25P32_SECTOR_COUNT 64 +#define STM_M25P32_SECTOR_SIZE 0x10000 + +#define STM_64MBIT_SIGNATURE 0x16 +#define STM_M25P64_BYTE_COUNT 8388608 +#define STM_M25P64_SECTOR_COUNT 128 +#define STM_M25P64_SECTOR_SIZE 0x10000 + +#define STM_128MBIT_SIGNATURE 0x17 +#define STM_M25P128_BYTE_COUNT 16777216 +#define STM_M25P128_SECTOR_COUNT 256 +#define STM_M25P128_SECTOR_SIZE 0x10000 + +#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT +#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT +#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE +#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT +#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT +#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE +#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT +#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT +#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE +#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT +#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT +#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE +#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT +#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT +#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE + +/* + * ST Microelectronics Opcodes for Serial Flash + */ + +#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ +#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ +#define STM_OP_RD_STATUS 0x05 /* Read Status */ +#define STM_OP_WR_STATUS 0x01 /* Write Status */ +#define STM_OP_RD_DATA 0x03 /* Read Data */ +#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ +#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ +#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ +#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ +#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ +#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ + +#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ +#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ +#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ +#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ +#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ +#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ + +/* + * SPI Flash Interface Registers + */ +#define AR531XPLUS_SPI_READ 0x08000000 +#define AR531XPLUS_SPI_MMR 0x11300000 +#define AR531XPLUS_SPI_MMR_SIZE 12 + +#define AR531XPLUS_SPI_CTL 0x00 +#define AR531XPLUS_SPI_OPCODE 0x04 +#define AR531XPLUS_SPI_DATA 0x08 + +#define SPI_FLASH_READ AR531XPLUS_SPI_READ +#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR +#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE +#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL +#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE +#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA + +#define SPI_CTL_START 0x00000100 +#define SPI_CTL_BUSY 0x00010000 +#define SPI_CTL_TXCNT_MASK 0x0000000f +#define SPI_CTL_RXCNT_MASK 0x000000f0 +#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff +#define SPI_CTL_SIZE_MASK 0x00060000 + +#define SPI_CTL_CLK_SEL_MASK 0x03000000 +#define SPI_OPCODE_MASK 0x000000ff + +#define SPI_STATUS_WIP STM_STATUS_WIP + +#endif