#include "mt7621.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc"; memory@0 { device_type = "memory"; reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; }; chosen { bootargs = "console=ttyS0,115200"; }; palmbus: palmbus@1E000000 { i2c@900 { status = "okay"; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; }; gpio-leds { compatible = "gpio-leds"; status { label = "zbt-wg3526:green:status"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; }; }; &sdhci { status = "okay"; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; m25p,chunked-io = <32>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; firmware: partition@50000 { label = "firmware"; }; }; }; &pcie { status = "okay"; pcie0 { wifi@14c3,7603 { compatible = "pci14c3,7603"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; }; }; pcie1 { wifi@14c3,7662 { compatible = "pci14c3,7662"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; }; ðernet { mtd-mac-address = <&factory 0xe000>; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "wdt", "rgmii2", "jtag", "mdio"; ralink,function = "gpio"; }; }; };