/dts-v1/; #include "mt7620a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc"; model = "Planex MZK-750DHP"; gpio-leds { compatible = "gpio-leds"; wps { label = "mzk-750dhp:green:wps"; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; }; power { label = "mzk-750dhp:green:power"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; wlan5g { label = "mzk-750dhp:green:wlan5g"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; s1 { label = "reset"; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; s2 { label = "wps"; gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; }; &gpio1 { status = "okay"; }; &gpio2 { status = "okay"; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd"; ralink,function = "gpio"; }; }; }; ðernet { pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; mtd-mac-address = <&factory 0x4>; mediatek,portmap = "llllw"; }; &gsw { mediatek,port4 = "ephy"; }; &wmac { ralink,mtd-eeprom = <&factory 0>; }; &pcie { status = "okay"; pcie-bridge { mt76@0,0 { reg = <0x0000 0 0 0 0>; device_type = "pci"; mediatek,mtd-eeprom = <&factory 0x8000>; }; }; };