--- a/drivers/net/ethernet/atheros/Makefile +++ b/drivers/net/ethernet/atheros/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_ATL2) += atlx/ obj-$(CONFIG_ATL1E) += atl1e/ obj-$(CONFIG_ATL1C) += atl1c/ obj-$(CONFIG_ALX) += alx/ +obj-$(CONFIG_NET_AR231X) += ar231x/ --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_ATHEROS bool "Atheros devices" default y - depends on PCI + depends on (PCI || ATH25) ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -78,4 +78,10 @@ config ALX To compile this driver as a module, choose M here. The module will be called alx. +config NET_AR231X + tristate "Atheros AR231X built-in Ethernet support" + depends on ATH25 + help + Support for the AR231x/531x ethernet controller + endif # NET_VENDOR_ATHEROS --- /dev/null +++ b/drivers/net/ethernet/atheros/ar231x/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_NET_AR231X) += ar231x.o --- /dev/null +++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c @@ -0,0 +1,1198 @@ +/* + * ar231x.c: Linux driver for the Atheros AR231x Ethernet device. + * + * Copyright (C) 2004 by Sameer Dekate + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006-2009 Felix Fietkau + * + * Thanks to Atheros for providing hardware and documentation + * enabling me to write this driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Additional credits: + * This code is taken from John Taylor's Sibyte driver and then + * modified for the AR2313. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AR2313_MTU 1692 +#define AR2313_PRIOS 1 +#define AR2313_QUEUES (2*AR2313_PRIOS) +#define AR2313_DESCR_ENTRIES 64 + +#ifndef min +#define min(a, b) (((a) < (b)) ? (a) : (b)) +#endif + +#ifndef SMP_CACHE_BYTES +#define SMP_CACHE_BYTES L1_CACHE_BYTES +#endif + +#define AR2313_MBOX_SET_BIT 0x8 + +#include "ar231x.h" + +/** + * New interrupt handler strategy: + * + * An old interrupt handler worked using the traditional method of + * replacing an skbuff with a new one when a packet arrives. However + * the rx rings do not need to contain a static number of buffer + * descriptors, thus it makes sense to move the memory allocation out + * of the main interrupt handler and do it in a bottom half handler + * and only allocate new buffers when the number of buffers in the + * ring is below a certain threshold. In order to avoid starving the + * NIC under heavy load it is however necessary to force allocation + * when hitting a minimum threshold. The strategy for alloction is as + * follows: + * + * RX_LOW_BUF_THRES - allocate buffers in the bottom half + * RX_PANIC_LOW_THRES - we are very low on buffers, allocate + * the buffers in the interrupt handler + * RX_RING_THRES - maximum number of buffers in the rx ring + * + * One advantagous side effect of this allocation approach is that the + * entire rx processing can be done without holding any spin lock + * since the rx rings and registers are totally independent of the tx + * ring and its registers. This of course includes the kmalloc's of + * new skb's. Thus start_xmit can run in parallel with rx processing + * and the memory allocation on SMP systems. + * + * Note that running the skb reallocation in a bottom half opens up + * another can of races which needs to be handled properly. In + * particular it can happen that the interrupt handler tries to run + * the reallocation while the bottom half is either running on another + * CPU or was interrupted on the same CPU. To get around this the + * driver uses bitops to prevent the reallocation routines from being + * reentered. + * + * TX handling can also be done without holding any spin lock, wheee + * this is fun! since tx_csm is only written to by the interrupt + * handler. + */ + +/** + * Threshold values for RX buffer allocation - the low water marks for + * when to start refilling the rings are set to 75% of the ring + * sizes. It seems to make sense to refill the rings entirely from the + * intrrupt handler once it gets below the panic threshold, that way + * we don't risk that the refilling is moved to another CPU when the + * one running the interrupt handler just got the slab code hot in its + * cache. + */ +#define RX_RING_SIZE AR2313_DESCR_ENTRIES +#define RX_PANIC_THRES (RX_RING_SIZE/4) +#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) +#define CRC_LEN 4 +#define RX_OFFSET 2 + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define VLAN_HDR 4 +#else +#define VLAN_HDR 0 +#endif + +#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + \ + RX_OFFSET) + +#ifdef MODULE +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sameer Dekate , Imre Kaloz , Felix Fietkau "); +MODULE_DESCRIPTION("AR231x Ethernet driver"); +#endif + +#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) + +/* prototypes */ +static void ar231x_halt(struct net_device *dev); +static void rx_tasklet_func(unsigned long data); +static void rx_tasklet_cleanup(struct net_device *dev); +static void ar231x_multicast_list(struct net_device *dev); +static void ar231x_tx_timeout(struct net_device *dev); + +static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); +static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, + u16 value); +static int ar231x_mdiobus_reset(struct mii_bus *bus); +static int ar231x_mdiobus_probe(struct net_device *dev); +static void ar231x_adjust_link(struct net_device *dev); + +#ifndef ERR +#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void +ar231x_netpoll(struct net_device *dev) +{ + unsigned long flags; + + local_irq_save(flags); + ar231x_interrupt(dev->irq, dev); + local_irq_restore(flags); +} +#endif + +static const struct net_device_ops ar231x_ops = { + .ndo_open = ar231x_open, + .ndo_stop = ar231x_close, + .ndo_start_xmit = ar231x_start_xmit, + .ndo_set_rx_mode = ar231x_multicast_list, + .ndo_do_ioctl = ar231x_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_tx_timeout = ar231x_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ar231x_netpoll, +#endif +}; + +static int ar231x_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct ar231x_private *sp; + struct resource *res; + unsigned long ar_eth_base; + char buf[64]; + + dev = alloc_etherdev(sizeof(struct ar231x_private)); + + if (dev == NULL) { + printk(KERN_ERR + "ar231x: Unable to allocate net_device structure!\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, dev); + + SET_NETDEV_DEV(dev, &pdev->dev); + + sp = netdev_priv(dev); + sp->dev = dev; + sp->cfg = pdev->dev.platform_data; + + sprintf(buf, "eth%d_membase", pdev->id); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); + if (!res) + return -ENODEV; + + sp->link = 0; + ar_eth_base = res->start; + + sprintf(buf, "eth%d_irq", pdev->id); + dev->irq = platform_get_irq_byname(pdev, buf); + + spin_lock_init(&sp->lock); + + dev->features |= NETIF_F_HIGHDMA; + dev->netdev_ops = &ar231x_ops; + + tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long)dev); + tasklet_disable(&sp->rx_tasklet); + + sp->eth_regs = ioremap_nocache(ar_eth_base, sizeof(*sp->eth_regs)); + if (!sp->eth_regs) { + printk("Can't remap eth registers\n"); + return -ENXIO; + } + + /** + * When there's only one MAC, PHY regs are typically on ENET0, + * even though the MAC might be on ENET1. + * So remap PHY regs separately. + */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth0_mii"); + if (!res) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "eth1_mii"); + if (!res) + return -ENODEV; + } + sp->phy_regs = ioremap_nocache(res->start, resource_size(res)); + if (!sp->phy_regs) { + printk("Can't remap phy registers\n"); + return -ENXIO; + } + + sp->dma_regs = ioremap_nocache(ar_eth_base + 0x1000, + sizeof(*sp->dma_regs)); + if (!sp->dma_regs) { + printk("Can't remap DMA registers\n"); + return -ENXIO; + } + dev->base_addr = ar_eth_base + 0x1000; + + strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); + sp->name[sizeof(sp->name) - 1] = '\0'; + memcpy(dev->dev_addr, sp->cfg->macaddr, 6); + + if (ar231x_init(dev)) { + /* ar231x_init() calls ar231x_init_cleanup() on error */ + kfree(dev); + return -ENODEV; + } + + if (register_netdev(dev)) { + printk("%s: register_netdev failed\n", __func__); + return -1; + } + + printk("%s: %s: %pM, irq %d\n", dev->name, sp->name, dev->dev_addr, + dev->irq); + + sp->mii_bus = mdiobus_alloc(); + if (sp->mii_bus == NULL) + return -1; + + sp->mii_bus->priv = dev; + sp->mii_bus->read = ar231x_mdiobus_read; + sp->mii_bus->write = ar231x_mdiobus_write; + sp->mii_bus->reset = ar231x_mdiobus_reset; + sp->mii_bus->name = "ar231x_eth_mii"; + snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id); + + mdiobus_register(sp->mii_bus); + + if (ar231x_mdiobus_probe(dev) != 0) { + printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); + rx_tasklet_cleanup(dev); + ar231x_init_cleanup(dev); + unregister_netdev(dev); + kfree(dev); + return -ENODEV; + } + + /* start link poll timer */ + ar231x_setup_timer(dev); + + return 0; +} + +static void ar231x_multicast_list(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + unsigned int filter; + + filter = sp->eth_regs->mac_control; + + if (dev->flags & IFF_PROMISC) + filter |= MAC_CONTROL_PR; + else + filter &= ~MAC_CONTROL_PR; + if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0)) + filter |= MAC_CONTROL_PM; + else + filter &= ~MAC_CONTROL_PM; + + sp->eth_regs->mac_control = filter; +} + +static void rx_tasklet_cleanup(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + + /** + * Tasklet may be scheduled. Need to get it removed from the list + * since we're about to free the struct. + */ + + sp->unloading = 1; + tasklet_enable(&sp->rx_tasklet); + tasklet_kill(&sp->rx_tasklet); +} + +static int ar231x_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct ar231x_private *sp = netdev_priv(dev); + + rx_tasklet_cleanup(dev); + ar231x_init_cleanup(dev); + unregister_netdev(dev); + mdiobus_unregister(sp->mii_bus); + mdiobus_free(sp->mii_bus); + kfree(dev); + return 0; +} + +/** + * Restart the AR2313 ethernet controller. + */ +static int ar231x_restart(struct net_device *dev) +{ + /* disable interrupts */ + disable_irq(dev->irq); + + /* stop mac */ + ar231x_halt(dev); + + /* initialize */ + ar231x_init(dev); + + /* enable interrupts */ + enable_irq(dev->irq); + + return 0; +} + +static struct platform_driver ar231x_driver = { + .driver.name = "ar231x-eth", + .probe = ar231x_probe, + .remove = ar231x_remove, +}; + +module_platform_driver(ar231x_driver); + +static void ar231x_free_descriptors(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + + if (sp->rx_ring != NULL) { + kfree((void *)KSEG0ADDR(sp->rx_ring)); + sp->rx_ring = NULL; + sp->tx_ring = NULL; + } +} + +static int ar231x_allocate_descriptors(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + int size; + int j; + ar231x_descr_t *space; + + if (sp->rx_ring != NULL) { + printk("%s: already done.\n", __func__); + return 0; + } + + size = sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES); + space = kmalloc(size, GFP_KERNEL); + if (space == NULL) + return 1; + + /* invalidate caches */ + dma_cache_inv((unsigned int)space, size); + + /* now convert pointer to KSEG1 */ + space = (ar231x_descr_t *)KSEG1ADDR(space); + + memset((void *)space, 0, size); + + sp->rx_ring = space; + space += AR2313_DESCR_ENTRIES; + + sp->tx_ring = space; + space += AR2313_DESCR_ENTRIES; + + /* Initialize the transmit Descriptors */ + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + ar231x_descr_t *td = &sp->tx_ring[j]; + + td->status = 0; + td->devcs = DMA_TX1_CHAINED; + td->addr = 0; + td->descr = virt_to_phys(&sp->tx_ring[DSC_NEXT(j)]); + } + + return 0; +} + +/** + * Generic cleanup handling data allocated during init. Used when the + * module is unloaded or if an error occurs during initialization + */ +static void ar231x_init_cleanup(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + struct sk_buff *skb; + int j; + + ar231x_free_descriptors(dev); + + if (sp->eth_regs) + iounmap((void *)sp->eth_regs); + if (sp->dma_regs) + iounmap((void *)sp->dma_regs); + if (sp->phy_regs) + iounmap((void *)sp->phy_regs); + + if (sp->rx_skb) { + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + skb = sp->rx_skb[j]; + if (skb) { + sp->rx_skb[j] = NULL; + dev_kfree_skb(skb); + } + } + kfree(sp->rx_skb); + sp->rx_skb = NULL; + } + + if (sp->tx_skb) { + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + skb = sp->tx_skb[j]; + if (skb) { + sp->tx_skb[j] = NULL; + dev_kfree_skb(skb); + } + } + kfree(sp->tx_skb); + sp->tx_skb = NULL; + } +} + +static int ar231x_setup_timer(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + + init_timer(&sp->link_timer); + + sp->link_timer.function = ar231x_link_timer_fn; + sp->link_timer.data = (int)dev; + sp->link_timer.expires = jiffies + HZ; + + add_timer(&sp->link_timer); + return 0; +} + +static void ar231x_link_timer_fn(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct ar231x_private *sp = netdev_priv(dev); + + /** + * See if the link status changed. + * This was needed to make sure we set the PHY to the + * autonegotiated value of half or full duplex. + */ + ar231x_check_link(dev); + + /** + * Loop faster when we don't have link. + * This was needed to speed up the AP bootstrap time. + */ + if (sp->link == 0) + mod_timer(&sp->link_timer, jiffies + HZ / 2); + else + mod_timer(&sp->link_timer, jiffies + LINK_TIMER); +} + +static void ar231x_check_link(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + u16 phy_data; + + phy_data = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); + if (sp->phy_data != phy_data) { + if (phy_data & BMSR_LSTATUS) { + /** + * Link is present, ready link partner ability to + * deterine duplexity. + */ + int duplex = 0; + u16 reg; + + sp->link = 1; + reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, + MII_BMCR); + if (reg & BMCR_ANENABLE) { + /* auto neg enabled */ + reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, + MII_LPA); + duplex = reg & (LPA_100FULL | LPA_10FULL) ? + 1 : 0; + } else { + /* no auto neg, just read duplex config */ + duplex = (reg & BMCR_FULLDPLX) ? 1 : 0; + } + + printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", + dev->name, (duplex) ? "full" : "half"); + + if (duplex) { + /* full duplex */ + sp->eth_regs->mac_control = + (sp->eth_regs->mac_control | + MAC_CONTROL_F) & ~MAC_CONTROL_DRO; + } else { + /* half duplex */ + sp->eth_regs->mac_control = + (sp->eth_regs->mac_control | + MAC_CONTROL_DRO) & ~MAC_CONTROL_F; + } + } else { + /* no link */ + sp->link = 0; + } + sp->phy_data = phy_data; + } +} + +static int ar231x_reset_reg(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + unsigned int ethsal, ethsah; + unsigned int flags; + + sp->cfg->reset_set(sp->cfg->reset_mac); + mdelay(10); + sp->cfg->reset_clear(sp->cfg->reset_mac); + mdelay(10); + sp->cfg->reset_set(sp->cfg->reset_phy); + mdelay(10); + sp->cfg->reset_clear(sp->cfg->reset_phy); + mdelay(10); + + sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); + mdelay(10); + sp->dma_regs->bus_mode = + ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); + + /* enable interrupts */ + sp->dma_regs->intr_ena = DMA_STATUS_AIS | DMA_STATUS_NIS | + DMA_STATUS_RI | DMA_STATUS_TI | + DMA_STATUS_FBE; + sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); + sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); + sp->dma_regs->control = + (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); + + sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); + sp->eth_regs->vlan_tag = (0x8100); + + /* Enable Ethernet Interface */ + flags = (MAC_CONTROL_TE | /* transmit enable */ + MAC_CONTROL_PM | /* pass mcast */ + MAC_CONTROL_F | /* full duplex */ + MAC_CONTROL_HBD); /* heart beat disabled */ + + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + flags |= MAC_CONTROL_PR; + } + sp->eth_regs->mac_control = flags; + + /* Set all Ethernet station address registers to their initial values */ + ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF); + + ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | + (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | + (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF); + + sp->eth_regs->mac_addr[0] = ethsah; + sp->eth_regs->mac_addr[1] = ethsal; + + mdelay(10); + + return 0; +} + +static int ar231x_init(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + int ecode = 0; + + /* Allocate descriptors */ + if (ar231x_allocate_descriptors(dev)) { + printk("%s: %s: ar231x_allocate_descriptors failed\n", + dev->name, __func__); + ecode = -EAGAIN; + goto init_error; + } + + /* Get the memory for the skb rings */ + if (sp->rx_skb == NULL) { + sp->rx_skb = + kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, + GFP_KERNEL); + if (!(sp->rx_skb)) { + printk("%s: %s: rx_skb kmalloc failed\n", + dev->name, __func__); + ecode = -EAGAIN; + goto init_error; + } + } + memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); + + if (sp->tx_skb == NULL) { + sp->tx_skb = + kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, + GFP_KERNEL); + if (!(sp->tx_skb)) { + printk("%s: %s: tx_skb kmalloc failed\n", + dev->name, __func__); + ecode = -EAGAIN; + goto init_error; + } + } + memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); + + /** + * Set tx_csm before we start receiving interrupts, otherwise + * the interrupt handler might think it is supposed to process + * tx ints before we are up and running, which may cause a null + * pointer access in the int handler. + */ + sp->rx_skbprd = 0; + sp->cur_rx = 0; + sp->tx_prd = 0; + sp->tx_csm = 0; + + /* Zero the stats before starting the interface */ + memset(&dev->stats, 0, sizeof(dev->stats)); + + /** + * We load the ring here as there seem to be no way to tell the + * firmware to wipe the ring without re-initializing it. + */ + ar231x_load_rx_ring(dev, RX_RING_SIZE); + + /* Init hardware */ + ar231x_reset_reg(dev); + + /* Get the IRQ */ + ecode = request_irq(dev->irq, &ar231x_interrupt, 0, + dev->name, dev); + if (ecode) { + printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", + dev->name, __func__, dev->irq); + goto init_error; + } + + tasklet_enable(&sp->rx_tasklet); + + return 0; + +init_error: + ar231x_init_cleanup(dev); + return ecode; +} + +/** + * Load the rx ring. + * + * Loading rings is safe without holding the spin lock since this is + * done only before the device is enabled, thus no interrupts are + * generated and by the interrupt handler/tasklet handler. + */ +static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs) +{ + struct ar231x_private *sp = netdev_priv(dev); + short i, idx; + + idx = sp->rx_skbprd; + + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + ar231x_descr_t *rd; + + if (sp->rx_skb[idx]) + break; + + skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE); + if (!skb) { + printk("\n\n\n\n %s: No memory in system\n\n\n\n", + __func__); + break; + } + + /* Make sure IP header starts on a fresh cache line */ + skb->dev = dev; + sp->rx_skb[idx] = skb; + + rd = (ar231x_descr_t *)&sp->rx_ring[idx]; + + /* initialize dma descriptor */ + rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | + DMA_RX1_CHAINED); + rd->addr = virt_to_phys(skb->data); + rd->descr = virt_to_phys(&sp->rx_ring[DSC_NEXT(idx)]); + rd->status = DMA_RX_OWN; + + idx = DSC_NEXT(idx); + } + + if (i) + sp->rx_skbprd = idx; +} + +#define AR2313_MAX_PKTS_PER_CALL 64 + +static int ar231x_rx_int(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + struct sk_buff *skb, *skb_new; + ar231x_descr_t *rxdesc; + unsigned int status; + u32 idx; + int pkts = 0; + int rval; + + idx = sp->cur_rx; + + /* process at most the entire ring and then wait for another int */ + while (1) { + rxdesc = &sp->rx_ring[idx]; + status = rxdesc->status; + + if (status & DMA_RX_OWN) { + /* SiByte owns descriptor or descr not yet filled in */ + rval = 0; + break; + } + + if (++pkts > AR2313_MAX_PKTS_PER_CALL) { + rval = 1; + break; + } + + if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) { + dev->stats.rx_errors++; + dev->stats.rx_dropped++; + + /* add statistics counters */ + if (status & DMA_RX_ERR_CRC) + dev->stats.rx_crc_errors++; + if (status & DMA_RX_ERR_COL) + dev->stats.rx_over_errors++; + if (status & DMA_RX_ERR_LENGTH) + dev->stats.rx_length_errors++; + if (status & DMA_RX_ERR_RUNT) + dev->stats.rx_over_errors++; + if (status & DMA_RX_ERR_DESC) + dev->stats.rx_over_errors++; + + } else { + /* alloc new buffer. */ + skb_new = netdev_alloc_skb_ip_align(dev, + AR2313_BUFSIZE); + if (skb_new != NULL) { + skb = sp->rx_skb[idx]; + /* set skb */ + skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & + 0x3fff) - CRC_LEN); + + dev->stats.rx_bytes += skb->len; + skb->protocol = eth_type_trans(skb, dev); + /* pass the packet to upper layers */ + netif_rx(skb); + + skb_new->dev = dev; + /* reset descriptor's curr_addr */ + rxdesc->addr = virt_to_phys(skb_new->data); + + dev->stats.rx_packets++; + sp->rx_skb[idx] = skb_new; + } else { + dev->stats.rx_dropped++; + } + } + + rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | + DMA_RX1_CHAINED); + rxdesc->status = DMA_RX_OWN; + + idx = DSC_NEXT(idx); + } + + sp->cur_rx = idx; + + return rval; +} + +static void ar231x_tx_int(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + u32 idx; + struct sk_buff *skb; + ar231x_descr_t *txdesc; + unsigned int status = 0; + + idx = sp->tx_csm; + + while (idx != sp->tx_prd) { + txdesc = &sp->tx_ring[idx]; + status = txdesc->status; + + if (status & DMA_TX_OWN) { + /* ar231x dma still owns descr */ + break; + } + /* done with this descriptor */ + dma_unmap_single(NULL, txdesc->addr, + txdesc->devcs & DMA_TX1_BSIZE_MASK, + DMA_TO_DEVICE); + txdesc->status = 0; + + if (status & DMA_TX_ERROR) { + dev->stats.tx_errors++; + dev->stats.tx_dropped++; + if (status & DMA_TX_ERR_UNDER) + dev->stats.tx_fifo_errors++; + if (status & DMA_TX_ERR_HB) + dev->stats.tx_heartbeat_errors++; + if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) + dev->stats.tx_carrier_errors++; + if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL | + DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) + dev->stats.tx_aborted_errors++; + } else { + /* transmit OK */ + dev->stats.tx_packets++; + } + + skb = sp->tx_skb[idx]; + sp->tx_skb[idx] = NULL; + idx = DSC_NEXT(idx); + dev->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + } + + sp->tx_csm = idx; +} + +static void rx_tasklet_func(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct ar231x_private *sp = netdev_priv(dev); + + if (sp->unloading) + return; + + if (ar231x_rx_int(dev)) { + tasklet_hi_schedule(&sp->rx_tasklet); + } else { + unsigned long flags; + + spin_lock_irqsave(&sp->lock, flags); + sp->dma_regs->intr_ena |= DMA_STATUS_RI; + spin_unlock_irqrestore(&sp->lock, flags); + } +} + +static void rx_schedule(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + + sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; + + tasklet_hi_schedule(&sp->rx_tasklet); +} + +static irqreturn_t ar231x_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct ar231x_private *sp = netdev_priv(dev); + unsigned int status, enabled; + + /* clear interrupt */ + /* Don't clear RI bit if currently disabled */ + status = sp->dma_regs->status; + enabled = sp->dma_regs->intr_ena; + sp->dma_regs->status = status & enabled; + + if (status & DMA_STATUS_NIS) { + /* normal status */ + /** + * Don't schedule rx processing if interrupt + * is already disabled. + */ + if (status & enabled & DMA_STATUS_RI) { + /* receive interrupt */ + rx_schedule(dev); + } + if (status & DMA_STATUS_TI) { + /* transmit interrupt */ + ar231x_tx_int(dev); + } + } + + /* abnormal status */ + if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) + ar231x_restart(dev); + + return IRQ_HANDLED; +} + +static int ar231x_open(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + unsigned int ethsal, ethsah; + + /* reset the hardware, in case the MAC address changed */ + ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF); + + ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | + (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | + (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF); + + sp->eth_regs->mac_addr[0] = ethsah; + sp->eth_regs->mac_addr[1] = ethsal; + + mdelay(10); + + dev->mtu = 1500; + netif_start_queue(dev); + + sp->eth_regs->mac_control |= MAC_CONTROL_RE; + + return 0; +} + +static void ar231x_tx_timeout(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&sp->lock, flags); + ar231x_restart(dev); + spin_unlock_irqrestore(&sp->lock, flags); +} + +static void ar231x_halt(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + int j; + + tasklet_disable(&sp->rx_tasklet); + + /* kill the MAC */ + sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ + MAC_CONTROL_TE); /* disable Transmits */ + /* stop dma */ + sp->dma_regs->control = 0; + sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; + + /* place phy and MAC in reset */ + sp->cfg->reset_set(sp->cfg->reset_mac); + sp->cfg->reset_set(sp->cfg->reset_phy); + + /* free buffers on tx ring */ + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + struct sk_buff *skb; + ar231x_descr_t *txdesc; + + txdesc = &sp->tx_ring[j]; + txdesc->descr = 0; + + skb = sp->tx_skb[j]; + if (skb) { + dev_kfree_skb(skb); + sp->tx_skb[j] = NULL; + } + } +} + +/** + * close should do nothing. Here's why. It's called when + * 'ifconfig bond0 down' is run. If it calls free_irq then + * the irq is gone forever ! When bond0 is made 'up' again, + * the ar231x_open () does not call request_irq (). Worse, + * the call to ar231x_halt() generates a WDOG reset due to + * the write to reset register and the box reboots. + * Commenting this out is good since it allows the + * system to resume when bond0 is made up again. + */ +static int ar231x_close(struct net_device *dev) +{ +#if 0 + /* Disable interrupts */ + disable_irq(dev->irq); + + /** + * Without (or before) releasing irq and stopping hardware, this + * is an absolute non-sense, by the way. It will be reset instantly + * by the first irq. + */ + netif_stop_queue(dev); + + /* stop the MAC and DMA engines */ + ar231x_halt(dev); + + /* release the interrupt */ + free_irq(dev->irq, dev); + +#endif + return 0; +} + +static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + ar231x_descr_t *td; + u32 idx; + + idx = sp->tx_prd; + td = &sp->tx_ring[idx]; + + if (td->status & DMA_TX_OWN) { + /* free skbuf and lie to the caller that we sent it out */ + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + + /* restart transmitter in case locked */ + sp->dma_regs->xmt_poll = 0; + return 0; + } + + /* Setup the transmit descriptor. */ + td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | + (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); + td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); + td->status = DMA_TX_OWN; + + /* kick transmitter last */ + sp->dma_regs->xmt_poll = 0; + + sp->tx_skb[idx] = skb; + idx = DSC_NEXT(idx); + sp->tx_prd = idx; + + return 0; +} + +static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct ar231x_private *sp = netdev_priv(dev); + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return phy_mii_ioctl(sp->phy_dev, ifr, cmd); + + default: + break; + } + + return -EOPNOTSUPP; +} + +static void ar231x_adjust_link(struct net_device *dev) +{ + struct ar231x_private *sp = netdev_priv(dev); + unsigned int mc; + + if (!sp->phy_dev->link) + return; + + if (sp->phy_dev->duplex != sp->oldduplex) { + mc = readl(&sp->eth_regs->mac_control); + mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO); + if (sp->phy_dev->duplex) + mc |= MAC_CONTROL_F; + else + mc |= MAC_CONTROL_DRO; + writel(mc, &sp->eth_regs->mac_control); + sp->oldduplex = sp->phy_dev->duplex; + } +} + +#define MII_ADDR(phy, reg) \ + ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) + +static int +ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) +{ + struct net_device *const dev = bus->priv; + struct ar231x_private *sp = netdev_priv(dev); + volatile MII *ethernet = sp->phy_regs; + + ethernet->mii_addr = MII_ADDR(phy_addr, regnum); + while (ethernet->mii_addr & MII_ADDR_BUSY) + ; + return ethernet->mii_data >> MII_DATA_SHIFT; +} + +static int +ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) +{ + struct net_device *const dev = bus->priv; + struct ar231x_private *sp = netdev_priv(dev); + volatile MII *ethernet = sp->phy_regs; + + while (ethernet->mii_addr & MII_ADDR_BUSY) + ; + ethernet->mii_data = value << MII_DATA_SHIFT; + ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; + + return 0; +} + +static int ar231x_mdiobus_reset(struct mii_bus *bus) +{ + struct net_device *const dev = bus->priv; + + ar231x_reset_reg(dev); + + return 0; +} + +static int ar231x_mdiobus_probe(struct net_device *dev) +{ + struct ar231x_private *const sp = netdev_priv(dev); + struct phy_device *phydev = NULL; + + /* find the first (lowest address) PHY on the current MAC's MII bus */ + phydev = phy_find_first(sp->mii_bus); + if (!phydev) { + printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name); + return -1; + } + + /* now we are supposed to have a proper phydev, to attach to... */ + BUG_ON(phydev->attached_dev); + + phydev = phy_connect(dev, phydev_name(phydev), &ar231x_adjust_link, + PHY_INTERFACE_MODE_MII); + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* mask with MAC supported features */ + phydev->supported &= (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg + /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ + | SUPPORTED_MII + | SUPPORTED_TP); + + phydev->advertising = phydev->supported; + + sp->oldduplex = -1; + sp->phy_dev = phydev; + sp->phy = phydev->mdio.addr; + + printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", + dev->name, phydev->drv->name, phydev_name(phydev)); + + return 0; +} + --- /dev/null +++ b/drivers/net/ethernet/atheros/ar231x/ar231x.h @@ -0,0 +1,288 @@ +/* + * ar231x.h: Linux driver for the Atheros AR231x Ethernet device. + * + * Copyright (C) 2004 by Sameer Dekate + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006-2009 Felix Fietkau + * + * Thanks to Atheros for providing hardware and documentation + * enabling me to write this driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _AR2313_H_ +#define _AR2313_H_ + +#include +#include +#include +#include + +/* probe link timer - 5 secs */ +#define LINK_TIMER (5*HZ) + +#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) +#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) +#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) + +#define AR2313_TX_TIMEOUT (HZ/4) + +/* Rings */ +#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) +#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) + +#define AR2313_MBGET 2 +#define AR2313_MBSET 3 +#define AR2313_PCI_RECONFIG 4 +#define AR2313_PCI_DUMP 5 +#define AR2313_TEST_PANIC 6 +#define AR2313_TEST_NULLPTR 7 +#define AR2313_READ_DATA 8 +#define AR2313_WRITE_DATA 9 +#define AR2313_GET_VERSION 10 +#define AR2313_TEST_HANG 11 +#define AR2313_SYNC 12 + +#define DMA_RX_ERR_CRC BIT(1) +#define DMA_RX_ERR_DRIB BIT(2) +#define DMA_RX_ERR_MII BIT(3) +#define DMA_RX_EV2 BIT(5) +#define DMA_RX_ERR_COL BIT(6) +#define DMA_RX_LONG BIT(7) +#define DMA_RX_LS BIT(8) /* last descriptor */ +#define DMA_RX_FS BIT(9) /* first descriptor */ +#define DMA_RX_MF BIT(10) /* multicast frame */ +#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */ +#define DMA_RX_ERR_LENGTH BIT(12) /* length error */ +#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */ +#define DMA_RX_ERROR BIT(15) /* error summary */ +#define DMA_RX_LEN_MASK 0x3fff0000 +#define DMA_RX_LEN_SHIFT 16 +#define DMA_RX_FILT BIT(30) +#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */ + +#define DMA_RX1_BSIZE_MASK 0x000007ff +#define DMA_RX1_BSIZE_SHIFT 0 +#define DMA_RX1_CHAINED BIT(24) +#define DMA_RX1_RER BIT(25) + +#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */ +#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */ +#define DMA_TX_COL_MASK 0x78 +#define DMA_TX_COL_SHIFT 3 +#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */ +#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */ +#define DMA_TX_ERR_LATE BIT(9) /* late collision */ +#define DMA_TX_ERR_LINK BIT(10) /* no carrier */ +#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */ +#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */ +#define DMA_TX_ERROR BIT(15) /* frame aborted */ +#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */ + +#define DMA_TX1_BSIZE_MASK 0x000007ff +#define DMA_TX1_BSIZE_SHIFT 0 +#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */ +#define DMA_TX1_TER BIT(25) /* transmit end of ring */ +#define DMA_TX1_FS BIT(29) /* first segment */ +#define DMA_TX1_LS BIT(30) /* last segment */ +#define DMA_TX1_IC BIT(31) /* interrupt on completion */ + +#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ + +#define MAC_CONTROL_RE BIT(2) /* receive enable */ +#define MAC_CONTROL_TE BIT(3) /* transmit enable */ +#define MAC_CONTROL_DC BIT(5) /* Deferral check */ +#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */ +#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */ +#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */ +#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */ +#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */ +#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */ +#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */ +#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */ +#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */ +#define MAC_CONTROL_PR BIT(18) /* promis mode (valid frames only) */ +#define MAC_CONTROL_PM BIT(19) /* pass multicast */ +#define MAC_CONTROL_F BIT(20) /* full-duplex */ +#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */ +#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */ +#define MAC_CONTROL_BLE BIT(30) /* big endian mode */ +#define MAC_CONTROL_RA BIT(31) /* rcv all (valid and invalid frames) */ + +#define MII_ADDR_BUSY BIT(0) +#define MII_ADDR_WRITE BIT(1) +#define MII_ADDR_REG_SHIFT 6 +#define MII_ADDR_PHY_SHIFT 11 +#define MII_DATA_SHIFT 0 + +#define FLOW_CONTROL_FCE BIT(1) + +#define DMA_BUS_MODE_SWR BIT(0) /* software reset */ +#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */ +#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ +#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */ + +#define DMA_STATUS_TI BIT(0) /* transmit interrupt */ +#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */ +#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */ +#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */ +#define DMA_STATUS_UNF BIT(5) /* transmit underflow */ +#define DMA_STATUS_RI BIT(6) /* receive interrupt */ +#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */ +#define DMA_STATUS_RPS BIT(8) /* receive process stopped */ +#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */ +#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */ +#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */ +#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */ +#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */ +#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ +#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ +#define DMA_STATUS_EB_SHIFT 23 /* error bits */ + +#define DMA_CONTROL_SR BIT(1) /* start receive */ +#define DMA_CONTROL_ST BIT(13) /* start transmit */ +#define DMA_CONTROL_SF BIT(21) /* store and forward */ + +typedef struct { + volatile unsigned int status; /* OWN, Device control and status. */ + volatile unsigned int devcs; /* pkt Control bits + Length */ + volatile unsigned int addr; /* Current Address. */ + volatile unsigned int descr; /* Next descriptor in chain. */ +} ar231x_descr_t; + +/** + * New Combo structure for Both Eth0 AND eth1 + * + * Don't directly access MII related regs since phy chip could be actually + * connected to another ethernet block. + */ +typedef struct { + volatile unsigned int mac_control; /* 0x00 */ + volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ + volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ + volatile unsigned int __mii_addr; /* 0x14 */ + volatile unsigned int __mii_data; /* 0x18 */ + volatile unsigned int flow_control; /* 0x1c */ + volatile unsigned int vlan_tag; /* 0x20 */ + volatile unsigned int pad[7]; /* 0x24 - 0x3c */ + volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ +} ETHERNET_STRUCT; + +typedef struct { + volatile unsigned int mii_addr; + volatile unsigned int mii_data; +} MII; + +/******************************************************************** + * Interrupt controller + ********************************************************************/ + +typedef struct { + volatile unsigned int wdog_control; /* 0x08 */ + volatile unsigned int wdog_timer; /* 0x0c */ + volatile unsigned int misc_status; /* 0x10 */ + volatile unsigned int misc_mask; /* 0x14 */ + volatile unsigned int global_status; /* 0x18 */ + volatile unsigned int reserved; /* 0x1c */ + volatile unsigned int reset_control; /* 0x20 */ +} INTERRUPT; + +/******************************************************************** + * DMA controller + ********************************************************************/ +typedef struct { + volatile unsigned int bus_mode; /* 0x00 (CSR0) */ + volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ + volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ + volatile unsigned int rcv_base; /* 0x0c (CSR3) */ + volatile unsigned int xmt_base; /* 0x10 (CSR4) */ + volatile unsigned int status; /* 0x14 (CSR5) */ + volatile unsigned int control; /* 0x18 (CSR6) */ + volatile unsigned int intr_ena; /* 0x1c (CSR7) */ + volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ + volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ + volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ + volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ +} DMA; + +/** + * Struct private for the Sibyte. + * + * Elements are grouped so variables used by the tx handling goes + * together, and will go into the same cache lines etc. in order to + * avoid cache line contention between the rx and tx handling on SMP. + * + * Frequently accessed variables are put at the beginning of the + * struct to help the compiler generate better/shorter code. + */ +struct ar231x_private { + struct net_device *dev; + int version; + u32 mb[2]; + + volatile MII *phy_regs; + volatile ETHERNET_STRUCT *eth_regs; + volatile DMA *dma_regs; + struct ar231x_eth *cfg; + + spinlock_t lock; /* Serialise access to device */ + + /* RX and TX descriptors, must be adjacent */ + ar231x_descr_t *rx_ring; + ar231x_descr_t *tx_ring; + + struct sk_buff **rx_skb; + struct sk_buff **tx_skb; + + /* RX elements */ + u32 rx_skbprd; + u32 cur_rx; + + /* TX elements */ + u32 tx_prd; + u32 tx_csm; + + /* Misc elements */ + char name[48]; + struct { + u32 address; + u32 length; + char *mapping; + } desc; + + struct timer_list link_timer; + unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */ + unsigned short mac; + unsigned short link; /* 0 - link down, 1 - link up */ + u16 phy_data; + + struct tasklet_struct rx_tasklet; + int unloading; + + struct phy_device *phy_dev; + struct mii_bus *mii_bus; + int oldduplex; +}; + +/* Prototypes */ +static int ar231x_init(struct net_device *dev); +#ifdef TX_TIMEOUT +static void ar231x_tx_timeout(struct net_device *dev); +#endif +static int ar231x_restart(struct net_device *dev); +static void ar231x_load_rx_ring(struct net_device *dev, int bufs); +static irqreturn_t ar231x_interrupt(int irq, void *dev_id); +static int ar231x_open(struct net_device *dev); +static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int ar231x_close(struct net_device *dev); +static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); +static void ar231x_init_cleanup(struct net_device *dev); +static int ar231x_setup_timer(struct net_device *dev); +static void ar231x_link_timer_fn(unsigned long data); +static void ar231x_check_link(struct net_device *dev); + +#endif /* _AR2313_H_ */ --- a/arch/mips/ath25/ar2315_regs.h +++ b/arch/mips/ath25/ar2315_regs.h @@ -57,6 +57,9 @@ #define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */ #define AR2315_PCI_EXT_SIZE 0x40000000 +/* MII registers offset inside Ethernet MMR region */ +#define AR2315_ENET0_MII_BASE (AR2315_ENET0_BASE + 0x14) + /* * Configuration registers */ --- a/arch/mips/ath25/ar5312_regs.h +++ b/arch/mips/ath25/ar5312_regs.h @@ -64,6 +64,10 @@ #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ +/* MII registers offset inside Ethernet MMR region */ +#define AR5312_ENET0_MII_BASE (AR5312_ENET0_BASE + 0x14) +#define AR5312_ENET1_MII_BASE (AR5312_ENET1_BASE + 0x14) + /* Reset/Timer Block Address Map */ #define AR5312_TIMER 0x0000 /* countdown timer */ #define AR5312_RELOAD 0x0004 /* timer reload value */ --- a/arch/mips/ath25/ar2315.c +++ b/arch/mips/ath25/ar2315.c @@ -136,6 +136,8 @@ static void ar2315_irq_dispatch(void) if (pending & CAUSEF_IP3) do_IRQ(AR2315_IRQ_WLAN0); + else if (pending & CAUSEF_IP4) + do_IRQ(AR2315_IRQ_ENET0); #ifdef CONFIG_PCI_AR2315 else if (pending & CAUSEF_IP5) do_IRQ(AR2315_IRQ_LCBUS_PCI); @@ -169,6 +171,29 @@ void __init ar2315_arch_init_irq(void) ar2315_misc_irq_domain = domain; } +static void ar2315_device_reset_set(u32 mask) +{ + u32 val; + + val = ar2315_rst_reg_read(AR2315_RESET); + ar2315_rst_reg_write(AR2315_RESET, val | mask); +} + +static void ar2315_device_reset_clear(u32 mask) +{ + u32 val; + + val = ar2315_rst_reg_read(AR2315_RESET); + ar2315_rst_reg_write(AR2315_RESET, val & ~mask); +} + +static struct ar231x_eth ar2315_eth_data = { + .reset_set = ar2315_device_reset_set, + .reset_clear = ar2315_device_reset_clear, + .reset_mac = AR2315_RESET_ENET0, + .reset_phy = AR2315_RESET_EPHY0, +}; + static struct resource ar2315_gpio_res[] = { { .name = "ar2315-gpio", @@ -205,6 +230,11 @@ void __init ar2315_init_devices(void) ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; platform_device_register(&ar2315_gpio); + ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; + ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii", + AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0, + &ar2315_eth_data); + ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); } --- a/arch/mips/ath25/ar5312.c +++ b/arch/mips/ath25/ar5312.c @@ -132,6 +132,10 @@ static void ar5312_irq_dispatch(void) if (pending & CAUSEF_IP2) do_IRQ(AR5312_IRQ_WLAN0); + else if (pending & CAUSEF_IP3) + do_IRQ(AR5312_IRQ_ENET0); + else if (pending & CAUSEF_IP4) + do_IRQ(AR5312_IRQ_ENET1); else if (pending & CAUSEF_IP5) do_IRQ(AR5312_IRQ_WLAN1); else if (pending & CAUSEF_IP6) @@ -163,6 +167,36 @@ void __init ar5312_arch_init_irq(void) ar5312_misc_irq_domain = domain; } +static void ar5312_device_reset_set(u32 mask) +{ + u32 val; + + val = ar5312_rst_reg_read(AR5312_RESET); + ar5312_rst_reg_write(AR5312_RESET, val | mask); +} + +static void ar5312_device_reset_clear(u32 mask) +{ + u32 val; + + val = ar5312_rst_reg_read(AR5312_RESET); + ar5312_rst_reg_write(AR5312_RESET, val & ~mask); +} + +static struct ar231x_eth ar5312_eth0_data = { + .reset_set = ar5312_device_reset_set, + .reset_clear = ar5312_device_reset_clear, + .reset_mac = AR5312_RESET_ENET0, + .reset_phy = AR5312_RESET_EPHY0, +}; + +static struct ar231x_eth ar5312_eth1_data = { + .reset_set = ar5312_device_reset_set, + .reset_clear = ar5312_device_reset_clear, + .reset_mac = AR5312_RESET_ENET1, + .reset_phy = AR5312_RESET_EPHY1, +}; + static struct physmap_flash_data ar5312_flash_data = { .width = 2, }; @@ -243,6 +277,7 @@ static void __init ar5312_flash_init(voi void __init ar5312_init_devices(void) { struct ath25_boarddata *config; + u8 *c; ar5312_flash_init(); @@ -266,8 +301,30 @@ void __init ar5312_init_devices(void) platform_device_register(&ar5312_gpio); + /* Fix up MAC addresses if necessary */ + if (is_broadcast_ether_addr(config->enet0_mac)) + ether_addr_copy(config->enet0_mac, config->enet1_mac); + + /* If ENET0 and ENET1 have the same mac address, + * increment the one from ENET1 */ + if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) { + c = config->enet1_mac + 5; + while ((c >= config->enet1_mac) && !(++(*c))) + c--; + } + switch (ath25_soc) { case ATH25_SOC_AR5312: + ar5312_eth0_data.macaddr = config->enet0_mac; + ath25_add_ethernet(0, AR5312_ENET0_BASE, "eth0_mii", + AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET0, + &ar5312_eth0_data); + + ar5312_eth1_data.macaddr = config->enet1_mac; + ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth1_mii", + AR5312_ENET1_MII_BASE, AR5312_IRQ_ENET1, + &ar5312_eth1_data); + if (!ath25_board.radio) return; @@ -276,8 +333,18 @@ void __init ar5312_init_devices(void) ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); break; + /* + * AR2312/3 ethernet uses the PHY of ENET0, but the MAC + * of ENET1. Atheros calls it 'twisted' for a reason :) + */ case ATH25_SOC_AR2312: case ATH25_SOC_AR2313: + ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy; + ar5312_eth1_data.macaddr = config->enet0_mac; + ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth0_mii", + AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET1, + &ar5312_eth1_data); + if (!ath25_board.radio) return; break; --- a/arch/mips/ath25/devices.h +++ b/arch/mips/ath25/devices.h @@ -32,6 +32,8 @@ extern struct ar231x_board_config ath25_ extern void (*ath25_irq_dispatch)(void); int ath25_find_config(phys_addr_t offset, unsigned long size); +int ath25_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base, + int irq, void *pdata); void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk); int ath25_add_wmac(int nr, u32 base, int irq); --- a/arch/mips/ath25/devices.c +++ b/arch/mips/ath25/devices.c @@ -12,6 +12,51 @@ struct ar231x_board_config ath25_board; enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN; +static struct resource ath25_eth0_res[] = { + { + .name = "eth0_membase", + .flags = IORESOURCE_MEM, + }, + { + .name = "eth0_mii", + .flags = IORESOURCE_MEM, + }, + { + .name = "eth0_irq", + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource ath25_eth1_res[] = { + { + .name = "eth1_membase", + .flags = IORESOURCE_MEM, + }, + { + .name = "eth1_mii", + .flags = IORESOURCE_MEM, + }, + { + .name = "eth1_irq", + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device ath25_eth[] = { + { + .id = 0, + .name = "ar231x-eth", + .resource = ath25_eth0_res, + .num_resources = ARRAY_SIZE(ath25_eth0_res) + }, + { + .id = 1, + .name = "ar231x-eth", + .resource = ath25_eth1_res, + .num_resources = ARRAY_SIZE(ath25_eth1_res) + } +}; + static struct resource ath25_wmac0_res[] = { { .name = "wmac0_membase", @@ -70,6 +115,25 @@ const char *get_system_type(void) return soc_type_strings[ath25_soc]; } +int __init ath25_add_ethernet(int nr, u32 base, const char *mii_name, + u32 mii_base, int irq, void *pdata) +{ + struct resource *res; + + ath25_eth[nr].dev.platform_data = pdata; + res = &ath25_eth[nr].resource[0]; + res->start = base; + res->end = base + 0x2000 - 1; + res++; + res->name = mii_name; + res->start = mii_base; + res->end = mii_base + 8 - 1; + res++; + res->start = irq; + res->end = irq; + return platform_device_register(&ath25_eth[nr]); +} + void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) { struct uart_port s; --- a/arch/mips/include/asm/mach-ath25/ath25_platform.h +++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h @@ -70,4 +70,15 @@ struct ar231x_board_config { const char *radio; }; +/* + * Platform device information for the Ethernet MAC + */ +struct ar231x_eth { + void (*reset_set)(u32); + void (*reset_clear)(u32); + u32 reset_mac; + u32 reset_phy; + char *macaddr; +}; + #endif /* __ASM_MACH_ATH25_PLATFORM_H */