/* * lmu5000.dst - Device Tree file for CalAmp LMU5000 board * * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com> * * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9g20.dtsi" / { model = "CalAmp LMU5000"; compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; chosen { bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; }; memory { reg = <0x20000000 0x4000000>; }; clocks { #address-cells = <1>; #size-cells = <1>; ranges; main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; }; ahb { apb { pinctrl@fffff400 { board { pinctrl_pck0_as_mck: pck0_as_mck { atmel,pins = <2 1 0x2 0x0>; /* PC1 periph B */ }; }; }; dbgu: serial@fffff200 { status = "okay"; }; usart0: serial@fffb0000 { pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts &pinctrl_usart0_dtr_dsr &pinctrl_usart0_dcd &pinctrl_usart0_ri>; status = "okay"; }; usart2: serial@fffb8000 { status = "okay"; }; uart0: serial@fffd4000 { status = "okay"; }; uart1: serial@fffd8000 { status = "okay"; }; macb0: ethernet@fffc4000 { phy-mode = "mii"; status = "okay"; }; usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; ssc0: ssc@fffbc000 { status = "okay"; pinctrl-0 = <&pinctrl_ssc0_tx>; }; watchdog@fffffd40 { status = "okay"; }; }; nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; status = "okay"; kernel@0 { label = "kernel"; reg = <0x0 0x400000>; }; rootfs@400000 { label = "rootfs"; reg = <0x400000 0x3C00000>; }; user1@4000000 { label = "user1"; reg = <0x4000000 0x2000000>; }; user2@6000000 { label = "user2"; reg = <0x6000000 0x2000000>; }; }; usb0: ohci@00500000 { num-ports = <2>; status = "okay"; }; }; };