/* * $Id$ * * Infineon boards * * Copyright (C) 2007 OpenWrt.org * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, * Boston, MA 02110-1301, USA. * */ #include <linux/kernel.h> #include <linux/init.h> #include <asm/bootinfo.h> #include <asm/gpio.h> #include <asm/mach-adm5120/adm5120_board.h> #include <asm/mach-adm5120/adm5120_platform.h> static void switch_bank_gpio3(unsigned bank) { switch (bank) { case 0: gpio_set_value(ADM5120_GPIO_PIN3, 0); break; case 1: gpio_set_value(ADM5120_GPIO_PIN3, 1); break; } } static struct mtd_partition easy83000_partitions[] = { { .name = "admboot", .offset = 0, .size = 64*1024, .mask_flags = MTD_WRITEABLE, } , { .name = "boardcfg", .offset = MTDPART_OFS_APPEND, .size = 64*1024, } , { .name = "firmware", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, } }; static struct platform_device *easy83000_devices[] __initdata = { &adm5120_flash0_device, }; static void __init easy83000_setup(void) { gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */ /* setup data for flash0 device */ adm5120_flash0_data.switch_bank = switch_bank_gpio3; adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy83000_partitions); adm5120_flash0_data.parts = easy83000_partitions; /* TODO: setup mac addresses */ } static struct adm5120_board easy83000_board __initdata = { .mach_type = MACH_ADM5120_EASY83000, .name = "Infineon EASY-83000", .board_setup = easy83000_setup, .num_eth_ports = 6, .num_devices = ARRAY_SIZE(easy83000_devices), .devices = easy83000_devices, }; static int __init register_boards(void) { adm5120_board_register(&easy83000_board); return 0; } pure_initcall(register_boards);