/*
 * Aerohive HiveAP-330 Device Tree Source
 *
 * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/include/ "fsl/p1020si-pre.dtsi"
/ {
	model = "Aerohive HiveAP-330";
	compatible = "aerohive,hiveap-330";

	chosen {
		bootargs = "console=ttyS0,9600";
		bootargs-override = "console=ttyS0,9600 noinitrd";
	};

	memory {
		device_type = "memory";
	};

	board_lbc: lbc: localbus@ffe05000 {
		reg = <0 0xffe05000 0 0x1000>;
		ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x4000000>;
			bank-width = <2>;
			device-width = <1>;

			partition@0 {
				reg = <0x0 0x40000>;
				label = "dtb";
			};

			partition@40000 {
				reg = <0x40000 0x40000>;
				label = "initramfs";
			};

			partition@80000 {
				reg = <0x80000 0x27c0000>;
				label = "rootfs";
			};

			partition@2840000 {
				reg = <0x2840000 0x800000>;
				label = "kernel";
			};

			partition@3040000 {
				reg = <0x3040000 0xec0000>;
				label = "stock-jffs2";
				read-only;
			};

			partition@3f00000 {
				reg = <0x3f00000 0x20000>;
				label = "hw-info";
				read-only;
			};

			partition@3f20000 {
				reg = <0x3f20000 0x20000>;
				label = "boot-info";
				read-only;
			};

			partition@3f40000 {
				reg = <0x3f40000 0x20000>;
				label = "boot-info-backup";
				read-only;
			};

			partition@3f60000 {
				reg = <0x3f60000 0x20000>;
				label = "u-boot-env";
			};

			partition@3f80000 {
				reg = <0x3f80000 0x80000>;
				label = "u-boot";
				read-only;
			};

			firmware@0 {
				reg = <0x0 0x3040000>;
				label = "firmware";
			};
		};
	};

	board_soc: soc: soc@ffe00000 {
		ranges = <0x0 0x0 0xffe00000 0x100000>;

		i2c@3100 {
			tpm@29 {
				compatible = "atmel,at97sc3204t";
				reg = <0x29>;
			};

			lp5521@32 {
				compatible = "national,lp5521";
				reg = <0x32>;
				clock-mode = /bits/ 8 <2>;
				chan0 {
					chan-name = "hiveap-330:red:tricolor0";
					led-cur = /bits/ 8 <0x2f>;
					max-cur = /bits/ 8 <0x5f>;
				};
				chan1 {
					chan-name = "hiveap-330:green:tricolor0";
					led-cur = /bits/ 8 <0x2f>;
					max-cur = /bits/ 8 <0x5f>;
				};
				chan2 {
					chan-name = "hiveap-330:blue:tricolor0";
					led-cur = /bits/ 8 <0x2f>;
					max-cur = /bits/ 8 <0x5f>;
				};
			};

			/* Most likely SoC boot config */
			eeprom@51 {
				compatible = "eeprom";
				reg = <0x51>;
			};
		};

		mdio@24000 {
			phy0: ethernet-phy@0 {
				interrupts = <3 1 0 0>;
				reg = <0x1>;
			};

			phy1: ethernet-phy@1 {
				interrupts = <2 1 0 0>;
				reg = <0x2>;
			};
		};

		mdio@25000 {
			status = "disabled";
		};

		mdio@26000 {
			status = "disabled";
		};

		enet0: ethernet@b0000 {
			status = "okay";
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";

		};

		enet1: ethernet@b1000 {
			status = "disabled";
		};

		enet2: ethernet@b2000 {
			status = "okay";
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
		};

		gpio0: gpio-controller@fc00 {
		};

		usb@22000 {
			phy_type = "ulpi";
			dr_mode = "host";
		};

		usb@23000 {
			status = "disabled";
		};
	};

	pci0: pcie@ffe09000 {
		reg = <0x0 0xffe09000 0x0 0x1000>;
		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
			0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xa0000000
				  0x2000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};

	pci1: pcie@ffe0a000 {
		reg = <0x0 0xffe0a000 0x0 0x1000>;
		ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
		      0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xc0000000
			      0x2000000 0x0 0xc0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
		};
	};

	buttons {
		compatible = "gpio-keys";

		reset {
			label = "Reset button";
			gpios = <&gpio0 8 1>; /* active low */
			linux,code = <0x198>; /* KEY_RESTART */
		};
	};
};
/include/ "fsl/p1020si-post.dtsi"