/dts-v1/; #include "mt7620a.dtsi" #include #include / { compatible = "asus,rp-n53", "ralink,mt7620a-soc"; model = "Asus RP-N53"; gpio-keys-polled { compatible = "gpio-keys-polled"; poll-interval = <20>; touch { label = "touch"; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; linux,code = ; }; audio { label = "audio"; gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; linux,code = ; }; }; gpio-leds { compatible = "gpio-leds"; backlight { label = "rp-n53:white:back"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; wifi0 { label = "rp-n53:blue:5g3"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; wifi1 { label = "rp-n53:blue:5g2"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; wifi2 { label = "rp-n53:blue:5g1"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; wifi3 { label = "rp-n53:blue:wifi"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; wifi4 { label = "rp-n53:blue:2g1"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; wifi5 { label = "rp-n53:blue:2g2"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; wifi6 { label = "rp-n53:blue:2g3"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; }; &gpio1 { status = "okay"; }; &i2c { status = "okay"; }; &i2s { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pcm_i2s_pins>; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; &pcm { status = "okay"; }; &gdma { status = "okay"; }; &wmac { ralink,mtd-eeprom = <&factory 0>; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "mdio", "rgmii1"; ralink,function = "gpio"; }; }; }; &gsw { mediatek,port4 = "ephy"; pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "pci1814,5592"; reg = <0x0000 0 0 0 0>; ralink,2ghz = <0>; ralink,mtd-eeprom = <&factory 0x8000>; }; };