From 716125d6733c9722b238f6d230579ead67a616bf Mon Sep 17 00:00:00 2001 From: Eric Anholt <eric@anholt.net> Date: Thu, 31 Mar 2016 18:38:20 -0700 Subject: [PATCH] drm/vc4: Add support for gamma ramps. We could possibly save a bit of power by not requesting gamma conversion when the ramp happens to be 1:1, but at least if all the CRTCs are off the SRAM will be disabled. This should fix brightness sliders in a lot of fullscreen games. Signed-off-by: Eric Anholt <eric@anholt.net> (cherry picked from commit e582b6c7e7f9d0b1e30e8017e4082d3a9ede3310) --- drivers/gpu/drm/vc4/vc4_crtc.c | 58 ++++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/vc4/vc4_regs.h | 6 +++++ 2 files changed, 64 insertions(+) --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -49,6 +49,10 @@ struct vc4_crtc { /* Which HVS channel we're using for our CRTC. */ int channel; + u8 lut_r[256]; + u8 lut_g[256]; + u8 lut_b[256]; + struct drm_pending_vblank_event *event; }; @@ -147,6 +151,46 @@ static void vc4_crtc_destroy(struct drm_ drm_crtc_cleanup(crtc); } +static void +vc4_crtc_lut_load(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + u32 i; + + /* The LUT memory is laid out with each HVS channel in order, + * each of which takes 256 writes for R, 256 for G, then 256 + * for B. + */ + HVS_WRITE(SCALER_GAMADDR, + SCALER_GAMADDR_AUTOINC | + (vc4_crtc->channel * 3 * crtc->gamma_size)); + + for (i = 0; i < crtc->gamma_size; i++) + HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_r[i]); + for (i = 0; i < crtc->gamma_size; i++) + HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_g[i]); + for (i = 0; i < crtc->gamma_size; i++) + HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_b[i]); +} + +static void +vc4_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t start, uint32_t size) +{ + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + u32 i; + + for (i = start; i < start + size; i++) { + vc4_crtc->lut_r[i] = r[i] >> 8; + vc4_crtc->lut_g[i] = g[i] >> 8; + vc4_crtc->lut_b[i] = b[i] >> 8; + } + + vc4_crtc_lut_load(crtc); +} + static u32 vc4_get_fifo_full_level(u32 format) { static const u32 fifo_len_bytes = 64; @@ -260,8 +304,14 @@ static void vc4_crtc_mode_set_nofb(struc HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), SCALER_DISPBKGND_AUTOHS | + SCALER_DISPBKGND_GAMMA | (interlace ? SCALER_DISPBKGND_INTERLACE : 0)); + /* Reload the LUT, since the SRAMs would have been disabled if + * all CRTCs had SCALER_DISPBKGND_GAMMA unset at once. + */ + vc4_crtc_lut_load(crtc); + if (debug_dump_regs) { DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc)); vc4_crtc_dump_regs(vc4_crtc); @@ -613,6 +663,7 @@ static const struct drm_crtc_funcs vc4_c .reset = drm_atomic_helper_crtc_reset, .atomic_duplicate_state = vc4_crtc_duplicate_state, .atomic_destroy_state = vc4_crtc_destroy_state, + .gamma_set = vc4_crtc_gamma_set, }; static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { @@ -731,6 +782,7 @@ static int vc4_crtc_bind(struct device * primary_plane->crtc = crtc; vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc; vc4_crtc->channel = vc4_crtc->data->hvs_channel; + drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r)); /* Set up some arbitrary number of planes. We're not limited * by a set number of physical registers, just the space in @@ -771,6 +823,12 @@ static int vc4_crtc_bind(struct device * vc4_set_crtc_possible_masks(drm, crtc); + for (i = 0; i < crtc->gamma_size; i++) { + vc4_crtc->lut_r[i] = i; + vc4_crtc->lut_g[i] = i; + vc4_crtc->lut_b[i] = i; + } + platform_set_drvdata(pdev, vc4_crtc); return 0; --- a/drivers/gpu/drm/vc4/vc4_regs.h +++ b/drivers/gpu/drm/vc4/vc4_regs.h @@ -390,6 +390,12 @@ #define SCALER_DISPBASE2 0x0000006c #define SCALER_DISPALPHA2 0x00000070 #define SCALER_GAMADDR 0x00000078 +# define SCALER_GAMADDR_AUTOINC BIT(31) +/* Enables all gamma ramp SRAMs, not just those of CRTCs with gamma + * enabled. + */ +# define SCALER_GAMADDR_SRAMENB BIT(30) + #define SCALER_GAMDATA 0x000000e0 #define SCALER_DLIST_START 0x00002000 #define SCALER_DLIST_SIZE 0x00004000