/dts-v1/; #include "danube.dtsi" #include <dt-bindings/input/input.h> / { model = "ARV7519PW - Astoria Networks"; chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; }; aliases { led-boot = &power; led-failsafe = &power2; led-running = &power; led-dsl = &dsl; led-internet = &online; led-wifi = &wifi; }; memory@0 { reg = <0x0 0x4000000>; }; sram@1F000000 { vmmc@107000 { status = "okay"; }; }; fpi@10000000 { localbus@0 { nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x2000000>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x00000 0x40000>; read-only; }; partition@40000 { label = "uboot_env"; reg = <0x40000 0x20000>; }; partition@60000 { label = "firmware"; reg = <0x60000 0xf80000>; }; boardconfig: partition@fe0000 { label = "board_config"; reg = <0xfe0000 0x20000>; read-only; }; }; }; }; gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { ebu { lantiq,groups = "ebu cs1"; lantiq,function = "ebu"; }; pci_in { lantiq,groups = "req1"; lantiq,function = "pci"; lantiq,open-drain = <1>; lantiq,pull = <2>; lantiq,output = <0>; }; pci_out { lantiq,groups = "gnt1"; lantiq,function = "pci"; lantiq,pull = <0>; lantiq,output = <1>; }; pci_rst { lantiq,pins = "io21"; lantiq,pull = <2>; lantiq,output = <1>; }; switch_rst { lantiq,pins = "io19"; lantiq,pull = <2>; lantiq,output = <1>; }; }; }; etop@E180000 { phy-mode = "mii"; mtd-mac-address = <&boardconfig 0x16>; }; /* warning: passive port only works with active devices */ ifxhcd@E101000 { status = "okay"; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; rfkill { label = "rfkill"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_RFKILL>; }; reset { label = "reset"; gpios = <&gpio 28 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; }; gpio-leds { compatible = "gpio-leds"; power: power { label = "power"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; }; power2: power2 { label = "power2"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; online: online { label = "online"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; online2 { label = "online2"; gpios = <&gpio 30 GPIO_ACTIVE_LOW>; }; wifi: wifi { label = "wifi"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; wifi2 { label = "wifi2"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; wifi3 { label = "wifi3"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; }; voice { label = "voice"; gpios = <&gpio 31 GPIO_ACTIVE_LOW>; }; wps { label = "wps"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; wps2 { label = "wps2"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; }; wps3 { label = "wps3"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; }; dsl: dsl { label = "dsl"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; lan { label = "lan"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; tv { label = "tv"; gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; upgrade { label = "upgrade"; gpios = <&gpio 29 GPIO_ACTIVE_LOW>; }; }; /* is there another way to "reserve" the GPIO? */ gpio_export { compatible = "gpio-export"; #size-cells = <0>; switch { gpio-export,name = "switch"; gpio-export,output = <1>; gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; }; }; }; &pci0 { status = "okay"; lantiq,external-clock; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; req-mask = <0xf>; wifi@0,0 { compatible = "pci0,0"; reg = <0x7000 0 0 0 0>; ralink,mtd-eeprom = <&boardconfig 0x410>; ralink,mtd-eeprom-swap; }; };