From 691deae097b2583a4e9890307c684ce9f58aca78 Mon Sep 17 00:00:00 2001
From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Date: Tue, 24 May 2016 15:03:33 +0530
Subject: [PATCH 45/93] board/freescale/ls1012afrdm: Add support of Ethernet

Add support of SGMII Ethernet present on FRDM board.
Also add support of PHY reset.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
---
 board/freescale/ls1012afrdm/Makefile      |    1 +
 board/freescale/ls1012afrdm/eth.c         |   86 +++++++++++++++++++++++++++++
 board/freescale/ls1012afrdm/ls1012afrdm.c |    5 --
 include/configs/ls1012afrdm.h             |    5 ++
 4 files changed, 92 insertions(+), 5 deletions(-)
 create mode 100644 board/freescale/ls1012afrdm/eth.c

diff --git a/board/freescale/ls1012afrdm/Makefile b/board/freescale/ls1012afrdm/Makefile
index dbfa2ce..1364f22 100644
--- a/board/freescale/ls1012afrdm/Makefile
+++ b/board/freescale/ls1012afrdm/Makefile
@@ -5,3 +5,4 @@
 #
 
 obj-y += ls1012afrdm.o
+obj-y += eth.o
diff --git a/board/freescale/ls1012afrdm/eth.c b/board/freescale/ls1012afrdm/eth.c
new file mode 100644
index 0000000..8ae3f45
--- /dev/null
+++ b/board/freescale/ls1012afrdm/eth.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fsl_dtsec.h>
+#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/config.h>
+#include <asm/arch/fsl_serdes.h>
+
+#include "../../../drivers/net/pfe_eth/pfe_eth.h"
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+
+#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
+
+#define MASK_ETH_PHY_RST	0x00000100
+
+void reset_phy(void)
+{
+	unsigned int val;
+	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_GPIO1_ADDR);
+
+	setbits_be32(&pgpio->gpdir, MASK_ETH_PHY_RST);
+
+	val = in_be32(&pgpio->gpdat);
+	setbits_be32(&pgpio->gpdat, val & ~MASK_ETH_PHY_RST);
+	mdelay(10);
+
+	val = in_be32(&pgpio->gpdat);
+	setbits_be32(&pgpio->gpdat, val | MASK_ETH_PHY_RST);
+	mdelay(50);
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_PPFE
+        struct mii_dev *bus;
+	struct mdio_info mac1_mdio_info;
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+
+	/*TODO Following config should be done for all boards, where is the right place to put this */
+	out_be32(&scfg->pfeasbcr, in_be32(&scfg->pfeasbcr) | SCFG_PPFEASBCR_AWCACHE0);
+	out_be32(&scfg->pfebsbcr, in_be32(&scfg->pfebsbcr) | SCFG_PPFEASBCR_AWCACHE0);
+
+	/*CCI-400 QoS settings for PFE */
+	out_be32(&scfg->wr_qos1, 0x0ff00000);
+	out_be32(&scfg->rd_qos1, 0x0ff00000);
+
+	/* Set RGMII into 1G + Full duplex mode */
+	out_be32(&scfg->rgmiipcr, in_be32(&scfg->rgmiipcr) | (SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETFD));
+
+
+	out_be32((CONFIG_SYS_DCSR_DCFG_ADDR + 0x520), 0xFFFFFFFF);
+	out_be32((CONFIG_SYS_DCSR_DCFG_ADDR + 0x524), 0xFFFFFFFF);
+
+	mac1_mdio_info.reg_base = (void *)0x04200000; /*EMAC1_BASE_ADDR*/
+	mac1_mdio_info.name = DEFAULT_PFE_MDIO_NAME;
+
+	bus = ls1012a_mdio_init(&mac1_mdio_info);
+	if(!bus)
+	{
+		printf("Failed to register mdio \n");
+		return -1;
+	}
+
+	/*MAC1 */
+	ls1012a_set_mdio(0, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
+	ls1012a_set_phy_address_mode(0,  EMAC1_PHY_ADDR, PHY_INTERFACE_MODE_SGMII);
+
+	/*MAC2 */
+	ls1012a_set_mdio(1, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
+	ls1012a_set_phy_address_mode(1,  EMAC2_PHY_ADDR, PHY_INTERFACE_MODE_SGMII);
+
+
+	cpu_eth_init(bis);
+#endif
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 6be8951..6856250 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -133,11 +133,6 @@ int dram_init(void)
 	return 0;
 }
 
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
-
 int board_early_init_f(void)
 {
 	fsl_lsch2_early_init_f();
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 3231ab7..5e619c1 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -18,8 +18,13 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
+#ifdef CONFIG_FSL_PPFE
+#define EMAC1_PHY_ADDR          0x2
+#define EMAC2_PHY_ADDR          0x1
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_REALTEK
+#define CONFIG_RESET_PHY_R
+#endif
 /*
 * USB
 */
-- 
1.7.9.5