Index: linux-3.3.8/arch/mips/ar7/platform.c =================================================================== --- linux-3.3.8.orig/arch/mips/ar7/platform.c 2012-10-06 21:15:51.930451885 -0700 +++ linux-3.3.8/arch/mips/ar7/platform.c 2012-10-06 21:15:51.962452050 -0700 @@ -33,7 +33,6 @@ #include #include #include -#include #include #include @@ -248,12 +247,6 @@ }, }; -static struct fixed_phy_status fixed_phy_status __initdata = { - .link = 1, - .speed = 100, - .duplex = 1, -}; - static struct plat_cpmac_data cpmac_low_data = { .reset_bit = 17, .power_bit = 20, @@ -709,26 +702,19 @@ } if (ar7_has_high_cpmac()) { - res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); - if (!res) { - cpmac_get_mac(1, cpmac_high_data.dev_addr); - - res = platform_device_register(&cpmac_high); - if (res) - pr_warning("unable to register cpmac-high: %d\n", res); - } else - pr_warning("unable to add cpmac-high phy: %d\n", res); - } else - cpmac_low_data.phy_mask = 0xffffffff; + cpmac_get_mac(0, cpmac_high_data.dev_addr); - res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); - if (!res) { - cpmac_get_mac(0, cpmac_low_data.dev_addr); - res = platform_device_register(&cpmac_low); + res = platform_device_register(&cpmac_high); if (res) - pr_warning("unable to register cpmac-low: %d\n", res); - } else - pr_warning("unable to add cpmac-low phy: %d\n", res); + pr_warning("unable to register cpmac-high: %d\n", res); + cpmac_get_mac(1, cpmac_low_data.dev_addr); + } else { + cpmac_low_data.phy_mask = 0xffffffff; + cpmac_get_mac(0, cpmac_low_data.dev_addr); + } + res = platform_device_register(&cpmac_low); + if (res) + pr_warning("unable to register cpmac-low: %d\n", res); detect_leds(); res = platform_device_register(&ar7_gpio_leds); @@ -741,8 +727,10 @@ /* Register watchdog only if enabled in hardware */ bootcr = ioremap_nocache(AR7_REGS_DCL, 4); - val = readl(bootcr); - iounmap(bootcr); + if (bootcr) { + val = readl(bootcr); + iounmap(bootcr); + } if (val & AR7_WDT_HW_ENA) { if (ar7_has_high_vlynq()) ar7_wdt_res.start = UR8_REGS_WDT; Index: linux-3.3.8/arch/mips/include/asm/mach-ar7/ar7.h =================================================================== --- linux-3.3.8.orig/arch/mips/include/asm/mach-ar7/ar7.h 2012-06-01 00:16:13.000000000 -0700 +++ linux-3.3.8/arch/mips/include/asm/mach-ar7/ar7.h 2012-10-06 21:15:51.966452059 -0700 @@ -42,6 +42,7 @@ #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) +#define AR7_REGS_MII (AR7_REGS_BASE + 0x1a08) #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) Index: linux-3.3.8/drivers/net/ethernet/ti/cpmac.c =================================================================== --- linux-3.3.8.orig/drivers/net/ethernet/ti/cpmac.c 2012-10-06 21:15:51.946451965 -0700 +++ linux-3.3.8/drivers/net/ethernet/ti/cpmac.c 2012-10-11 11:23:17.459719956 -0700 @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -48,14 +47,11 @@ MODULE_ALIAS("platform:cpmac"); static int debug_level = 8; -static int dumb_switch; -/* Next 2 are only used in cpmac_probe, so it's pointless to change them */ +/* Next is only used in cpmac_probe, so it's pointless to change them */ module_param(debug_level, int, 0444); -module_param(dumb_switch, int, 0444); MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable"); -MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus"); #define CPMAC_VERSION "0.5.2" /* frame size + 802.1q tag + FCS size */ @@ -674,9 +670,8 @@ for (i = 0; i < 8; i++) cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]); cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]); - cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] | - (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) | - (dev->dev_addr[3] << 24)); + cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *) + dev->dev_addr)); cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE); cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff); cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff); @@ -1121,25 +1116,18 @@ pdata = pdev->dev.platform_data; - if (external_switch || dumb_switch) { - strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ - phy_id = pdev->id; - } else { - for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { - if (!(pdata->phy_mask & (1 << phy_id))) - continue; - if (!cpmac_mii->phy_map[phy_id]) - continue; - strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); - break; - } + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + if (!(pdata->phy_mask & (1 << phy_id))) + continue; + if (!cpmac_mii->phy_map[phy_id]) + continue; + strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); + break; } if (phy_id == PHY_MAX_ADDR) { - dev_err(&pdev->dev, "no PHY present, falling back " - "to switch on MDIO bus 0\n"); - strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */ - phy_id = pdev->id; + printk(KERN_ERR "cpmac: No PHY present\n"); + return -ENXIO; } dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES); @@ -1178,6 +1166,13 @@ snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); + rc = register_netdev(dev); + if (rc) { + printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, + dev->name); + goto fail; + } + priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII); @@ -1189,13 +1184,6 @@ goto fail; } - rc = register_netdev(dev); - if (rc) { - printk(KERN_ERR "cpmac: error %i registering device %s\n", rc, - dev->name); - goto fail; - } - if (netif_msg_probe(priv)) { printk(KERN_INFO "cpmac: device %s (regs: %p, irq: %d, phy: %s, " @@ -1228,6 +1216,7 @@ { u32 mask; int i, res; + void __iomem *mii_reg; cpmac_mii = mdiobus_alloc(); if (cpmac_mii == NULL) @@ -1251,31 +1240,51 @@ ar7_gpio_disable(26); ar7_gpio_disable(27); - if (!ar7_is_titan()) { + if (ar7_is_titan()) { + ar7_device_reset(AR7_RESET_BIT_EPHY); + ar7_device_reset(TITAN_RESET_BIT_EPHY1); + } else { + ar7_device_reset(AR7_RESET_BIT_EPHY); ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); } - ar7_device_reset(AR7_RESET_BIT_EPHY); - - if (ar7_is_titan()) - ar7_device_reset(TITAN_RESET_BIT_EPHY1); cpmac_mii->reset(cpmac_mii); for (i = 0; i < 300; i++) { mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE); + mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000); if (mask) break; else msleep(10); } - mask &= 0x7fffffff; if (mask & (mask - 1)) { external_switch = 1; - mask = 0; + if (!ar7_has_high_cpmac()) { + if (ar7_is_titan()) { + ar7_device_disable(AR7_RESET_BIT_EPHY); + ar7_device_disable(TITAN_RESET_BIT_EPHY1); + } else + ar7_device_disable(AR7_RESET_BIT_EPHY); + + //Titan remap might be different + mii_reg = ioremap(AR7_REGS_MII, 4); + if (mii_reg) { + writel(readl(mii_reg) | 1, mii_reg); + iounmap(mii_reg); + } + } } + if (external_switch) + printk(KERN_INFO "EXTERNAL SWITCH!!!\n"); + else if (mask) + printk(KERN_INFO "EXTERNAL PHY!!!\n"); + else + printk(KERN_INFO "INTERNAL PHY!!!\n"); + if (ar7_is_titan()) cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000); else