--- a/arch/mips/ath79/mach-ubnt-xm.c +++ b/arch/mips/ath79/mach-ubnt-xm.c @@ -12,16 +12,26 @@ #include <linux/init.h> #include <linux/pci.h> +#include <linux/platform_device.h> #include <linux/ath9k_platform.h> +#include <linux/etherdevice.h> +#include <linux/ar8216_platform.h> +#include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/irq.h> +#include <asm/mach-ath79/ar71xx_regs.h> +#include <linux/platform_data/phy-at803x.h> + +#include "common.h" #include "dev-ap9x-pci.h" +#include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" #include "machtypes.h" -#include "pci.h" #define UBNT_XM_GPIO_LED_L1 0 #define UBNT_XM_GPIO_LED_L2 1 @@ -37,19 +47,19 @@ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { { - .name = "ubnt-xm:red:link1", + .name = "ubnt:red:link1", .gpio = UBNT_XM_GPIO_LED_L1, .active_low = 0, }, { - .name = "ubnt-xm:orange:link2", + .name = "ubnt:orange:link2", .gpio = UBNT_XM_GPIO_LED_L2, .active_low = 0, }, { - .name = "ubnt-xm:green:link3", + .name = "ubnt:green:link3", .gpio = UBNT_XM_GPIO_LED_L3, .active_low = 0, }, { - .name = "ubnt-xm:green:link4", + .name = "ubnt:green:link4", .gpio = UBNT_XM_GPIO_LED_L4, .active_low = 0, }, @@ -66,9 +76,13 @@ static struct gpio_keys_button ubnt_xm_g } }; +#define UBNT_M_WAN_PHYMASK BIT(4) + static void __init ubnt_xm_init(void) { u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), ubnt_xm_leds_gpio); @@ -79,9 +93,552 @@ static void __init ubnt_xm_init(void) ath79_register_m25p80(NULL); ap91_pci_init(eeprom, NULL); + + ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + ath79_register_eth(0); } MIPS_MACHINE(ATH79_MACH_UBNT_XM, "UBNT-XM", "Ubiquiti Networks XM (rev 1.0) board", ubnt_xm_init); + +MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", + ubnt_xm_init); + +static void __init ubnt_rocket_m_setup(void) +{ + ubnt_xm_init(); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", + ubnt_rocket_m_setup); + +static void __init ubnt_nano_m_setup(void) +{ + ubnt_xm_init(); + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", + ubnt_nano_m_setup); + +static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { + { + .name = "ubnt:green:globe", + .gpio = 0, + .active_low = 1, + }, { + .name = "ubnt:green:power", + .gpio = 11, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + } +}; + +static void __init ubnt_airrouter_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); + + ath79_register_eth(1); + ath79_register_eth(0); + ath79_register_usb(); + + ap91_pci_init(ee, NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), + ubnt_airrouter_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", + ubnt_airrouter_setup); + +static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { + { + .name = "ubnt:orange:dome", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:green:dome", + .gpio = 0, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { + { + .name = "ubnt:orange:front", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:green:front", + .gpio = 0, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = { + { + .name = "ubnt:white:front", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:blue:front", + .gpio = 0, + .active_low = 0, + } +}; + + +static void __init ubnt_unifi_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_register_eth(0); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), + ubnt_unifi_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", + ubnt_unifi_setup); + + +#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) +#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) + +static void __init ubnt_unifi_outdoor_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | + UBNT_UNIFIOD_2ND_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), + ubnt_unifi_outdoor_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", + "Ubiquiti UniFiAP Outdoor", + ubnt_unifi_outdoor_setup); + + +static void __init ubnt_unifi_outdoor_plus_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | + UBNT_UNIFIOD_2ND_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio), + ubnt_unifi_outdoor_plus_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP", + "Ubiquiti UniFiAP Outdoor+", + ubnt_unifi_outdoor_plus_setup); + + +static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { + { + .name = "ubnt:white:dome", + .gpio = 12, + }, { + .name = "ubnt:blue:dome", + .gpio = 13, + } +}; + +static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = 17, + .active_low = 1, + } +}; + +static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data uap_pro_ar8327_data = { + .pad0_cfg = &uap_pro_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info uap_pro_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &uap_pro_ar8327_data, + }, +}; + +#define UAP_PRO_MAC0_OFFSET 0x0000 +#define UAP_PRO_MAC1_OFFSET 0x0006 +#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 +#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 + +static void __init ubnt_uap_pro_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), + ubnt_uap_pro_gpio_leds); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(uap_pro_gpio_keys), + uap_pro_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + ath79_register_mdio(0, 0x0); + mdiobus_register_board_info(uap_pro_mdio0_info, + ARRAY_SIZE(uap_pro_mdio0_info)); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", + ubnt_uap_pro_setup); + +#define UBNT_XW_GPIO_LED_L1 11 +#define UBNT_XW_GPIO_LED_L2 16 +#define UBNT_XW_GPIO_LED_L3 13 +#define UBNT_XW_GPIO_LED_L4 14 + +static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { + { + .name = "ubnt:red:link1", + .gpio = UBNT_XW_GPIO_LED_L1, + .active_low = 1, + }, { + .name = "ubnt:orange:link2", + .gpio = UBNT_XW_GPIO_LED_L2, + .active_low = 1, + }, { + .name = "ubnt:green:link3", + .gpio = UBNT_XW_GPIO_LED_L3, + .active_low = 1, + }, { + .name = "ubnt:green:link4", + .gpio = UBNT_XW_GPIO_LED_L4, + .active_low = 1, + }, +}; + +#define UBNT_ROCKET_TI_GPIO_LED_L1 16 +#define UBNT_ROCKET_TI_GPIO_LED_L2 17 +#define UBNT_ROCKET_TI_GPIO_LED_L3 18 +#define UBNT_ROCKET_TI_GPIO_LED_L4 19 +#define UBNT_ROCKET_TI_GPIO_LED_L5 20 +#define UBNT_ROCKET_TI_GPIO_LED_L6 21 +static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = { + { + .name = "ubnt:green:link1", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L1, + .active_low = 1, + }, { + .name = "ubnt:green:link2", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L2, + .active_low = 1, + }, { + .name = "ubnt:green:link3", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L3, + .active_low = 1, + }, { + .name = "ubnt:green:link4", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L4, + .active_low = 0, + }, { + .name = "ubnt:green:link5", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L5, + .active_low = 0, + }, { + .name = "ubnt:green:link6", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L6, + .active_low = 0, + }, +}; + +static void __init ubnt_xw_init(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), + ubnt_xw_leds_gpio); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; +} + +static void __init ubnt_nano_m_xw_setup(void) +{ + ubnt_xw_init(); + + /* GMAC0 is connected to an AR8326 switch */ + ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); + ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_register_eth(0); +} + +static void __init ubnt_loco_m_xw_setup(void) +{ + ubnt_xw_init(); + + ath79_register_mdio(0, ~BIT(1)); + ath79_eth0_data.phy_mask = BIT(1); + ath79_register_eth(0); +} + +static void __init ubnt_rocket_m_xw_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), + ubnt_xw_leds_gpio); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_register_mdio(0, ~BIT(4)); + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = { + .disable_smarteee = 1, + .enable_rgmii_rx_delay = 1, + .enable_rgmii_tx_delay = 1, +}; +static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 4, + .platform_data = &ubnt_rocket_m_ti_at803_data, + }, +}; + +static void __init ubnt_rocket_m_ti_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio), + ubnt_rocket_ti_leds_gpio); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ap91_pci_init(eeprom + 0x1000, NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ath79_setup_ar934x_eth_rx_delay(3, 3); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, + eeprom + UAP_PRO_MAC1_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; + + mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info, + ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info)); + ath79_register_mdio(0, 0x0); + + + ath79_eth0_data.phy_mask = BIT(4); + /* read out from vendor */ + ath79_eth0_pll_data.pll_1000 = 0x2000000; + ath79_eth0_pll_data.pll_10 = 0x1313; + ath79_register_eth(0); + + ath79_register_mdio(1, 0x0); + ath79_eth1_data.phy_mask = BIT(3); + ath79_register_eth(1); +} + + +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", + ubnt_nano_m_xw_setup); + +MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", + ubnt_loco_m_xw_setup); + +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW", + ubnt_rocket_m_xw_setup); + +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI", + ubnt_rocket_m_ti_setup); + +static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { + { + .name = "ubnt:blue:wlan", + .gpio = 0, + }, { + .name = "ubnt:white:status", + .gpio = 1, + }, +}; + +static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + } +}; + +static void __init ubnt_airgateway_setup(void) +{ + u32 t; + u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; + ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), + ubnt_airgateway_gpio_leds); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(airgateway_gpio_keys), + airgateway_gpio_keys); + + ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + + ath79_register_mdio(0, 0x0); + + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_register_wmac(ee, NULL); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", + ubnt_airgateway_setup); + --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -68,12 +68,16 @@ config ATH79_MACH_PB44 Atheros PB44 reference board. config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" + bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X + select SOC_AR934X select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC help Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board.