/dts-v1/; #include "rt3050.dtsi" #include <dt-bindings/input/input.h> / { compatible = "UR-326N4G", "ralink,rt3052-soc"; model = "UPVEL UR-326N4G"; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; gpio-leds { compatible = "gpio-leds"; 3g { label = "ur-326n4g:green:3g"; gpios = <&gpio0 9 1>; }; gateway { label = "ur-326n4g:green:gateway"; gpios = <&gpio0 11 1>; }; ap { label = "ur-326n4g:green:ap"; gpios = <&gpio0 12 1>; }; wps { label = "ur-326n4g:green:wps"; gpios = <&gpio0 14 1>; }; station { label = "ur-326n4g:green:station"; gpios = <&gpio0 13 1>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset_wps { label = "reset_wps"; gpios = <&gpio0 10 1>; linux,code = <KEY_RESTART>; }; mode { label = "mode"; gpios = <&gpio0 7 1>; linux,code = <BTN_0>; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; ralink,function = "gpio"; }; }; }; ðernet { mtd-mac-address = <&factory 0x4004>; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { ralink,mtd-eeprom = <&factory 0>; }; &otg { status = "okay"; };