/dts-v1/; #include "mt7620a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "asus,rt-ac51u", "ralink,mt7620a-soc"; model = "Asus RT-AC51U"; gpio-leds { compatible = "gpio-leds"; power { label = "rt-ac51u:blue:power"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; usb { label = "rt-ac51u:blue:usb"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; wifi { label = "rt-ac51u:blue:wifi"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; enable-leds { gpio-export,name = "enable-leds"; gpio-export,output = <1>; gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; }; }; }; &spi0 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0xfb0000>; }; }; }; &ehci { status = "okay"; }; &ohci { status = "okay"; }; &gpio3 { status = "okay"; }; ðernet { status = "okay"; mtd-mac-address = <&factory 0x4>; mediatek,portmap = "wllll"; }; &wmac { ralink,mtd-eeprom = <&factory 0>; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "wled", "uartf"; ralink,function = "gpio"; }; }; };