KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
21617 commits 3 branches 0 tags 154 MiB
Commit graph

21617 commits

This branch
This branch
All branches
Author SHA1 Message Date
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver 
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
 2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches 
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
 2012-07-31 14:27:25 +00:00
Florian Fainelli
d1ab4df0d6 move i2c module to target modules.mk 
SVN-Revision: 32910
 2012-07-29 13:20:51 +00:00
Florian Fainelli
e29d26e56f partially revert r32855 
Too many modules were removed, while only the octeon module was meant to be
removed, fix that.

SVN-Revision: 32909
 2012-07-29 13:20:47 +00:00
Florian Fainelli
a5738c960a resync config 
SVN-Revision: 32908
 2012-07-29 13:20:39 +00:00
Florian Fainelli
17244dea00 use the same description as other omap platforms (without the dash) 
SVN-Revision: 32907
 2012-07-29 13:20:35 +00:00
John Crispin
ee0946a5f4 refresh pwm patch 
SVN-Revision: 32905
 2012-07-29 11:53:06 +00:00
John Crispin
1f58c9b6c1 dont build on arm as kernel headers are missing/have a different layout 
SVN-Revision: 32904
 2012-07-29 09:07:47 +00:00
John Crispin
370894e594 fix up scons vs ccache 
SVN-Revision: 32902
 2012-07-28 21:06:59 +00:00
John Crispin
101766fb00 clean up pwm patches and drivers 
SVN-Revision: 32901
 2012-07-28 20:47:08 +00:00
Hauke Mehrtens
f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build 
SVN-Revision: 32898
 2012-07-28 11:36:52 +00:00
Florian Fainelli
67891c26ec resync config 
SVN-Revision: 32895
 2012-07-27 15:35:15 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation 
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
 2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support 
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
 2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support 
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
 2012-07-27 15:35:05 +00:00
Florian Fainelli
6afd1725f1 base-files: fix detection of standalone ldd 
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 32891
 2012-07-27 15:35:00 +00:00
Florian Fainelli
4acdbb1d87 Add brcmsmac profile 
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
 2012-07-27 15:34:57 +00:00
John Crispin
9beec09f5f mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds 
SVN-Revision: 32886
 2012-07-27 08:30:05 +00:00
John Crispin
0ba7b18cfd Add leds back after migration to sysfs 
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 32885
 2012-07-26 17:06:55 +00:00
Florian Fainelli
46611b2cbf add more missing config symbols 
SVN-Revision: 32884
 2012-07-26 17:03:08 +00:00
Florian Fainelli
ac30beaaa7 add more USB-related config symbols 
SVN-Revision: 32883
 2012-07-26 17:03:05 +00:00
Florian Fainelli
a077e785cf make sure target modules depend on the target 
SVN-Revision: 32882
 2012-07-26 17:03:02 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
 2012-07-26 15:42:18 +00:00
Florian Fainelli
4a3cbbf99d make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx) 
SVN-Revision: 32878
 2012-07-26 09:29:22 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
 2012-07-25 19:52:30 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
SVN-Revision: 32869
 2012-07-25 19:36:19 +00:00
Felix Fietkau
5832e754fb mtd: fix trx_fixup 
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'.  Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem.  I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.

Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 32866
 2012-07-25 17:28:32 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk 
SVN-Revision: 32865
 2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk 
SVN-Revision: 32864
 2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk 
SVN-Revision: 32863
 2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk 
SVN-Revision: 32862
 2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk 
SVN-Revision: 32861
 2012-07-25 15:50:33 +00:00
Florian Fainelli
5b2450ef4f kmod-r6040 depends on PCI_SUPPORT 
SVN-Revision: 32860
 2012-07-25 15:50:29 +00:00
Florian Fainelli
3b5a8548f4 move mmc driver to target specific modules.mk 
SVN-Revision: 32859
 2012-07-25 15:50:26 +00:00
Florian Fainelli
18038c803c move ixp4xx-eth to target specific modules.mk 
SVN-Revision: 32858
 2012-07-25 15:50:23 +00:00
Florian Fainelli
53402a64b3 kmod-gpio-nxp74hc164 is not brcm63xx specific 
SVN-Revision: 32857
 2012-07-25 15:50:20 +00:00
Florian Fainelli
4000de357e move crypto module to target specific modules.mk 
SVN-Revision: 32856
 2012-07-25 15:50:16 +00:00
Florian Fainelli
a282e37c09 move i2c driver to target modules.mk 
SVN-Revision: 32855
 2012-07-25 15:50:13 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk 
SVN-Revision: 32854
 2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules 
SVN-Revision: 32853
 2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk 
SVN-Revision: 32852
 2012-07-25 15:50:02 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk 
SVN-Revision: 32851
 2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk 
SVN-Revision: 32850
 2012-07-25 15:49:54 +00:00
Florian Fainelli
29ccabae44 fix network devices modules to depend on PCI instead of x86 
SVN-Revision: 32849
 2012-07-25 15:49:52 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk 
SVN-Revision: 32848
 2012-07-25 15:49:49 +00:00
Florian Fainelli
276bc6b9e8 fix libsas and mvsas dependencies against PCI and not x86 
SVN-Revision: 32847
 2012-07-25 15:49:46 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk 
SVN-Revision: 32846
 2012-07-25 15:49:42 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
SVN-Revision: 32845
 2012-07-25 14:52:00 +00:00
Florian Fainelli
ab2cb9ce61 add yet another framebuffer symbol 
SVN-Revision: 32844
 2012-07-25 14:01:57 +00:00
Florian Fainelli
89a312bf48 split framebuffer helper modules to their own packages 
SVN-Revision: 32843
 2012-07-25 14:01:54 +00:00