Commit graph

39391 commits

Author SHA1 Message Date
Philip Prindeville
5c2c0f8a32 util-linux: don't need to build NLS support
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-08-23 18:36:22 +02:00
Andreas Ziegler
b69705b38a ath10k-firmware: update qca9887 firmware to 10.2.4-1.0-00029
Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
2017-08-23 16:34:21 +02:00
John Crispin
77d3ac8e3e iputils: switch to new upstream
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-23 16:31:35 +02:00
Marty Plummer
9ebb23cf51 tools/mkimage: fix musl build
Taken from: http://git.denx.de/?p=u-boot.git;a=commit;h=26e355d131a6b56ea78a156c1cee4f6ba0500b37

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
2017-08-23 15:12:15 +02:00
L. D. Pinney
e9eb6e7bb3 ramips: set ethernet mac address for VoCore2
This patch sets the mac address for the VoCore2 devices.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
2017-08-23 15:09:05 +02:00
Ansuel Smith
f099803eb5 samba36-net: new package
Samba could also be usefull for sending commands to windows pc (like shoutdown command). This new package add the bin to include this kind of command to the samba package.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2017-08-23 15:08:39 +02:00
Pavel Kubelun
6e283cdc0d ramips: add Xiaomi Mi Router 3G support
This commit adds support for Xiaomi Mi WiFi Router 3G.

Short specification:
 - MT7621AT + MT7603EN + 7612EN
 - 256MB DDR3 RAM
 - 128MB NAND flash
 - 1+2 x 1000M Ethernet
 - 1x USB 3.0 port
 - reset button
 - yellow, blue, red leds

Installation through telnet/ssh:
- copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and
lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it
from LEDE download site to /tmp
- switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if
wgetted from LEDE download site
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
- run: mtd erase kernel0
- run: reboot

Originally stock firmware has following partitions:
 - ...
 - kernel0 (primary kernel image)
 - kernel1 (secondary kernel image, used by u-boot in failsafe routine)
 - rootfs0 (primary rootfs)
 - rootfs1 (secondary rootfs in case primary fails)
 - overlay (used as ubi overlay)

This commit squashes rootfs0, rootfs1 and overlay partitions into 1, so
it can be used by LEDE fully for package installation, resulting in 117,5MiB.

This device lacks hw watchdog, so adding softdog instead (stock does the same).

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-08-23 14:59:12 +02:00
Jo-Philipp Wich
4fce22e88f util-linux: add missing dependencies
Commit e505f59bd9 "utils/util-linux: Update to 2.30.1" bumped util-linux
without properly adjusting the dependencies of all applets.

Add missing ncursesw dependencies to sfdisk and dmesg applets to fix
packaging issues.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-08-23 11:34:25 +02:00
Rafał Miłecki
8de57c9746 iwinfo: update to the latest git HEAD
c1a03e8 nl80211: request split information about frequencies
5638567 nl80211: store info about freq being not available for some bandwidths
ce51cb8 Allow storing more info about each frequency
5c10efa nl80211: support receiving split frequencies
335967c nl80211: improve error handling
ab089dd nl80211: propagate netlink errors to callers
7bba117 nl80211: handle netlink errors in nl80211_wait()
d22c64c iwinfo: add device id for Ubiquiti NanoStation Loco M2

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-23 11:19:28 +02:00
Jo-Philipp Wich
0168ba2e07 Revert "busybox: ash/hush fix for read-builtin command"
Revert this commit as it introduces a patchfile at a wrong location.
Since the patch was never effective, we can assume that this particular
commit was not properly tested.

This reverts commit dde9da46c1.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-08-23 10:58:10 +02:00
John Crispin
4cac13f8e2 Revert "xtables-addons: fix nathelper-rtsp dependencies"
This reverts commit e2ef80130e.

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-23 09:54:53 +02:00
John Crispin
dce8359d56 mediatek: drop kernel dep on userland module
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-23 09:54:26 +02:00
Philip Prindeville
e2ef80130e xtables-addons: fix nathelper-rtsp dependencies
Both nf_conntrack and nf_nat need to be called out.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-08-22 21:31:39 +02:00
John Crispin
6b44d9785f procd: update to latest git HEAD
54b46a3 procd: send ubus notify when a config file has changed

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 21:31:39 +02:00
John Crispin
34a206bc11 dnsmasq: add ubus notifications for new leases
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 21:31:39 +02:00
John Crispin
d18e0dc7d1 hostapd: add additional ubus notifications
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 21:31:39 +02:00
BangLang Huang
69da83d9f1 nvram: add help message for nvram magic not found
The program would failed if nvram magic not found
in specific partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
BangLang Huang
c7e2a6fe92 nvram: improve argument check when program start
print help message when argument count is less
than 2.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
BangLang Huang
2a253e7cdb nvram: add usage() function
Merge the help message into a single function,
so that we can use it somewhere else.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
BangLang Huang
1948d8e08c nvram: fix memory leak
Fix memory leak on nvram_open() and nvram_open_rdonly().

For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.

For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
John Crispin
e622b30730 netifd: update to latest git HEAD
b5731bf allow setting rps/xps defualt values via uci
2a29d1a system: remove unused 6rd tunnel attributes
e627542 netifd: allow negative neighlocktime values
e41382c system-linux: parse ipv6 specific tunnel settings as nested data json object

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 09:17:14 +02:00
Furong Xu
5a22df69e4 gpio-button-hotplug: leave platform_device.dev.platform_data untouched
get platform_data from gpio_keys_button_dev.pdata, and fix a illegal pointer
dereference like this:

[   51.143776] gpio-keys-polled gpio-keys-polled: missing poll_interval value
[   51.150852] gpio-keys-polled: probe of gpio-keys-polled failed with error -22
[  828.159993] gpio-keys-polled gpio-keys-polled: no memory for button data
[  828.166821] gpio-keys-polled: probe of gpio-keys-polled failed with error -12

Signed-off-by: Furong Xu <xfr@outlook.com>
2017-08-21 21:29:52 +02:00
Daniel Engberg
e505f59bd9 utils/util-linux: Update to 2.30.1
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-21 21:29:45 +02:00
Carl-Daniel Hailfinger
3e6d303d61 uboot-lantiq: Enable TFTP PUT support for backups
Backing up the current firmware from U-Boot over serial can take hours.
Booting a working Linux image for backup purposes is not always an option.
Using the tftpput command in U-Boot is the fastest and easiest way.

tftpput will upload the contents of a memory region to the TFTP server.
The IP address of the server is stored in the serverip variable.

Usage:
tftpput <memaddr> <length> <filename>

Example for a complete flash backup of an o2 Box 6431 (VGV7510KW22):
VGV7510KW22 # tftpput 0xB0000000 0x1000000 o2boxbackup.bin

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
2017-08-18 18:47:27 +02:00
Koen Vandeputte
0997185ffd imx6: add driver for temp/voltage monitoring
The Gateworks System Controller (GSC) mimics a standard AD7418 device on
I2C bus 0 at slave 0x29.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-08-18 18:47:11 +02:00
Koen Vandeputte
bfada08399 imx6: refresh kernel config
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-08-18 18:46:43 +02:00
Christian Schoenebeck
a2a226e6e8 ca-certificates: Update to 20170717
Update to 20170717

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
2017-08-18 18:44:38 +02:00
Florian Eckert
5209cfa534 procd: fix hotplug.json syntax
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-08-18 18:43:54 +02:00
Florian Eckert
a307480e2d procd: fix hotplug-preinit.json syntax
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-08-18 18:43:54 +02:00
John Crispin
1f068588ef mediatek: update to latest kernel patchset from v4.13-rc
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-18 18:41:41 +02:00
Kevin Darbyshire-Bryant
364befeccf kernel: update 4.4 to 4.4.83
Refresh patches.
Minor update 704-phy-no-genphy-soft-reset.patch which was partially
accepted upstream.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Fixes the following vulnerabilities:
- CVE-2017-7533 (4.4.80)
- CVE-2017-1000111 (4.4.82)
- CVE-2017-1000112 (4.4.82)

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[cleanup commit message, add compile/runtime tested]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-17 14:31:45 +02:00
Stijn Tintel
2d02a4f5bd kernel: update 4.9 to 4.9.44
Refresh patches.
Adapt 704-phy-no-genphy-soft-reset.patch.
Remove brcm2708/950-0005-mm-Remove-the-PFN-busy-warning.patch.
Compile-tested on brcm2708/bcm2708 and x86/64.
Runtime-tested on brcm2708/bcm2708 and x86/64.

Fixes the following vulnerabilities:
- CVE-2017-7533
- CVE-2017-1000111
- CVE-2017-1000112

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-17 12:34:34 +02:00
Rafał Miłecki
d9564d79b8 bcm53xx: backport DTS commits that setup USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-17 10:29:31 +02:00
Hans Dedecker
736950e947 odhcpd: update to latest git HEAD
94e65ee ndp: use IPv4 address list when comparing IPv4 addresses
ff5020d dhcpv6-ia: rework reconfigure accept logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-16 21:25:16 +02:00
L. D. Pinney
df3295f50e ramips: add support for the VoCore2 Lite
The VoCore2 Lite uses the same PCB as the Vocore2.
This patch moves the common VoCore2 parts into dtsi.

Removed memory node in the device tree source file.
Memory is detected automatically.

http://vocore.io/
http://vonger.net/
http://vonger.cn/

Specifications:
- SoC: MediaTek MT7688AN
- RAM: 64MB DDR2 EtronTech EM68B16CWQH-25H
- Flash: 8MB NOR SPI Flash GigaDevice GD25Q64CWIG
- Wireless: Built into MT7688AN with onboard IPEX connector

Firmware installation:
- VoCore2-Lite ships with firmware forked from OpenWrt.
- Installation from the bootloader is recommended.
- If using luci/sysupgrade use the -n option (do not keep settings)
  original firmware uses a modified proprietary MediaTek wireless driver.
- The wireless is disabled by default in LEDE.
- If reverting to factory firmware using the bootloader is recommended.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Tested by: Noble Pepper <noblepepper@gmail.com>
2017-08-11 18:12:56 +02:00
Mathias Kresin
8c9f847a80 ramips: fix WHR-1166D WAN port
By adding the ICPlus IP1001 phy driver an already set RGMII delay mode
is reset during driver load.

Set the rgmii rx delay to fix corrupt/no packages in case the WAN port
negotiates to 1000MBit.

Fixes: FS#670

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-11 18:12:56 +02:00
Stijn Tintel
e7373e489d wpa_supplicant: log to syslog instead of stdout
While debugging an issue with a client device, wpa_supplicant did not
seem to log anything at all. Make wpa_supplicant log to syslog instead
of stdout, to make debugging easier and to be consistent with hostapd.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-10 16:35:53 +02:00
Stijn Tintel
3e9c06d78c brcm2708-gpu-fw: update to latest version
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-10 16:34:15 +02:00
Rafał Miłecki
1e13c6f77f base-files: drop unused preinit_echo function
It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-09 23:23:06 +02:00
Hauke Mehrtens
779227d5ee nftables: remove date from version
We are using the normal 0.7 version of nftables, do not add an
additional date to the version number.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-08-09 23:20:56 +02:00
Daniel Engberg
965df21fd1 tools/pkg-config: Update to 0.29.2
* Update pkg-config to 0.29.2
* Remove patch as it's upstreamed

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-09 23:20:56 +02:00
Daniel Engberg
1a5b7cc151 tools/expat: Update to 2.2.3
Update (lib)expat to 2.2.3
Remove poor entropy hack, 2.2.3 uses /dev/urandom in worst case

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-09 23:20:56 +02:00
Daniel Engberg
10c443728d utils/e2fsprogs: Update to 1.43.5
Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-09 23:20:56 +02:00
Daniel Engberg
8477d54545 tools/e2fsprogs: Update to 1.43.5
Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-09 23:20:56 +02:00
Daniel Gonzalez Cabanelas
e1f91b4a1c lantiq: fix missing otg_cap on danube platform
USB doesn't work in some danube boards because otg_cap
is missing since previous changes made on the USB-dwc2
lantiq driver. Fix it.

Tested on the ARV7518PW router.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-08-09 23:20:56 +02:00
Rafał Miłecki
f41dd32722 base-files: don't setup network in preinit if failsafe is disabled
With failsafe disabled there is no point in early network setup. We
don't send announcement over UDP and there is no way to ssh to the
device.

A side effect of this is avoiding a possibly incorrect network config
(only with failsafe disabled). This problem is related to possible
changes made by user in /etc/config/network.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-09 23:18:59 +02:00
Hans Dedecker
0b7f7606dd procd: update to the latest git HEAD
a17e1e8 watchdog: fix inline watchdog_get_magicclose function prototype

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-08 14:52:56 +02:00
Thibaut VARENE
370aacf532 ramips: ArcherC50v1: fix wlan2g MAC address
By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-08-06 09:22:03 +02:00
Martin Schiller
c8904e9c04 lantiq: board.d: use auto xfer_mode as default
If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00
Martin Schiller
2da6c85c80 ltq-vdsl-app: add support for auto xfer_mode and auto line_mode
If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

xfer_mode and line_mode can be set to fixed value independantly from
each other.

The syntax for the tc_layer argument of vdsl_cpe_control is as follow:

-T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL>

where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer

and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be:
1=64/65-octet encapsulation supported
2=64/65-octet encapsulation with pre-emption
3=64/65-octet encapsulation with short packets

Default: In case of no '-T' option is given, ADSL will be configured
in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1

The '-M' argument of dsl_cpe_control defines the initial DSL mode
(NextMode) for ADSL/VDSL multimode handling.

Possible Values: 0=API-default, 1=ADSL, 2=VDSL

Default: In case of no '-M' option is given, '0' (API-default) will
be selected.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00