Commit graph

318 commits

Author SHA1 Message Date
Hauke Mehrtens
464539b074 kernel: update to version 3.0.3
SVN-Revision: 28043
2011-08-18 12:54:12 +00:00
Jo-Philipp Wich
ebb152295b fix the default network configuration for the ASUS WL-330gE (#8751)
SVN-Revision: 28024
2011-08-17 03:16:59 +00:00
Hauke Mehrtens
77218b0338 brcm47xx: fix flash detection on chipcommon less devices.
This closes #9906
Thank you for the report Kim

SVN-Revision: 27967
2011-08-12 16:37:22 +00:00
Hauke Mehrtens
51be984655 kernel: update to kernel version 3.0.1
SVN-Revision: 27918
2011-08-06 09:51:55 +00:00
Hauke Mehrtens
77966b81d8 brcm47xx: use kernel 3.0
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.

SVN-Revision: 27906
2011-08-04 20:10:24 +00:00
Hauke Mehrtens
8428ebd8e8 brcm47xx: update patches
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates

SVN-Revision: 27902
2011-08-04 20:04:54 +00:00
Hauke Mehrtens
4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
2011-07-24 15:18:29 +00:00
Hauke Mehrtens
49f4d4217e brcm47xx: build bcma into the kernel
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
2011-07-23 11:19:58 +00:00
Hauke Mehrtens
b07b5fc7b6 brcm47xx: remove old kernel versions
SVN-Revision: 27724
2011-07-22 18:41:24 +00:00
Hauke Mehrtens
b988168906 brcm47xx: update bcma and ssb to master-2011-07-21
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
2011-07-22 16:30:42 +00:00
Hauke Mehrtens
39f491e479 kernel: update to linux-3.0 and refresh patches.
Thank you Peter Wagner for the patch

SVN-Revision: 27722
2011-07-22 16:04:25 +00:00
Hauke Mehrtens
8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
Hauke Mehrtens
8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400.
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
Hauke Mehrtens
4c18da3df6 brcm47xx: add initial support for devices with bcma bus.
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
Hauke Mehrtens
3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5
SVN-Revision: 27300
2011-06-28 20:25:39 +00:00
Hauke Mehrtens
2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628
SVN-Revision: 27299
2011-06-28 19:33:50 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
Hauke Mehrtens
4c392185a6 brcm47xx: update kernel to version 2.6.39
SVN-Revision: 27296
2011-06-27 21:29:20 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
Hauke Mehrtens
e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection.
SVN-Revision: 27294
2011-06-27 20:20:11 +00:00
Hauke Mehrtens
47e218c426 brcm47xx: refresh patches
SVN-Revision: 27219
2011-06-18 15:53:14 +00:00
Hauke Mehrtens
79a7343560 kernel: update to kernel 2.6.38.8
SVN-Revision: 27218
2011-06-18 15:52:15 +00:00
Hauke Mehrtens
75f9e0c615 brcm47xx: add support for kernel 3.0
SVN-Revision: 27217
2011-06-18 15:24:44 +00:00
Hauke Mehrtens
bf64ac730a bcm47xx: Remove kernel checks from image Makefile
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
Hauke Mehrtens
8137e35a5d brcm47xx: initial 2.6.39 support for brcm47xx
Thank you Peter Wagner for the patch

SVN-Revision: 27008
2011-05-25 19:27:08 +00:00
Hauke Mehrtens
f5f989e3fb brcm47xx: remove old kernel
SVN-Revision: 27006
2011-05-25 18:05:54 +00:00
Hauke Mehrtens
06166b01dd brcm47xx: fix partition layout on SimpleShare devices.
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.

This fixes #9323

Thank you Will Holmes for the patch.

SVN-Revision: 27005
2011-05-25 17:46:34 +00:00
Hauke Mehrtens
732abc44cc brcm47xx: update patches
SVN-Revision: 26846
2011-05-07 12:49:17 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
Hauke Mehrtens
54fb8868fa brcm47xx: fix typo in patch
SVN-Revision: 26828
2011-05-05 13:18:35 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom.
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
Hauke Mehrtens
8b837430f3 brcm47xx: upgrade to kernel 2.6.27.6.
This should be save now.

SVN-Revision: 26533
2011-04-08 15:12:08 +00:00
Hauke Mehrtens
340c6914a3 brcm47xx: add initial support for kernel 2.6.38
SVN-Revision: 26524
2011-04-07 21:38:41 +00:00
Hauke Mehrtens
8d75dcb4b8 brcm47xx: remove kmod-usb-ohci from WGT634U packages.
This package creates some error messages on startup

Thank you russell-- for reporting

SVN-Revision: 26240
2011-03-19 23:19:08 +00:00
Imre Kaloz
a8d84ae94d remove 2.6.34 support
SVN-Revision: 26229
2011-03-18 13:40:48 +00:00
Hauke Mehrtens
537c6017cc brcm47xx: add workaround for fuse again.
This closes #4754

SVN-Revision: 26141
2011-03-13 19:25:24 +00:00
Hauke Mehrtens
a08bd03fad ssb: update ssb to version from linux-next-20110311
SVN-Revision: 26127
2011-03-13 17:24:28 +00:00
Hauke Mehrtens
4226f1d373 kernel: update to kernel version 2.6.37.3
SVN-Revision: 26126
2011-03-13 17:14:08 +00:00
Hauke Mehrtens
425bf41b23 kernel: update to kernel version 2.6.34.8
SVN-Revision: 26125
2011-03-13 17:13:11 +00:00
Florian Fainelli
45c9f5e75e update to kernel 2.6.36.4
SVN-Revision: 25580
2011-02-19 12:44:07 +00:00
Imre Kaloz
2821101c92 platform specific patches don't belong here - take #2
SVN-Revision: 25085
2011-01-24 12:11:25 +00:00
Imre Kaloz
7c9d132d10 platform specific patches don't belong here
SVN-Revision: 25083
2011-01-24 11:01:38 +00:00
Gabor Juhos
541bebf4ec brcm47xx: add gpio_set_debounce function
SVN-Revision: 24968
2011-01-11 20:05:01 +00:00
Hauke Mehrtens
d6af00c555 brcm47xx: fix compile problem when serial is deactivated.
Thank you Andrey

SVN-Revision: 24885
2011-01-02 20:53:09 +00:00
Hauke Mehrtens
acb5e80846 kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx.
SVN-Revision: 24805
2010-12-22 19:44:54 +00:00
Hauke Mehrtens
4bee3672dd brcm47xx: refresh patches with kernel 2.6.37-rc7
The deleted patches went upstream in 2.6.37-rc7

SVN-Revision: 24803
2010-12-22 19:42:37 +00:00
Hauke Mehrtens
93e09b14eb brcm47xx: wgt634u mac address fix
The Netgear wgt634u uses minus between the hex digest of the mac
address and all other broadcom devices are using colons between the hex
digest. Now the mac address is correctly parsed also when minus is used.

SVN-Revision: 24749
2010-12-21 13:34:09 +00:00
Hauke Mehrtens
9daa5485ba brcm47xx: add ssb debug option.
This fixes a problem with wrt350n.
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.

SVN-Revision: 24626
2010-12-16 19:35:59 +00:00
Hauke Mehrtens
1da5dcbb7a brcm47xx: add some missing pci ID for tg3 driver
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.

SVN-Revision: 24625
2010-12-16 19:31:05 +00:00
Hauke Mehrtens
c58d8a369c brcm47xx: this patch went upstream
SVN-Revision: 24624
2010-12-16 19:26:55 +00:00