Commit graph

40345 commits

Author SHA1 Message Date
Zoltan Gyarmati
6a5b62f503 ramips: RT5350F-OLINUXINO: enable ttyS1
The RT5350F's second UART pins are available on the base module and on
the EVB as well, so enable it in the device tree.
 In order to keep the origian serial port numbering (ttyS0 is the serial
console), aliases added for the UART devices.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
9d8d3d4501 ramips: RT5350F-OLINUXINO: enable i2c
The RT5350F i2c pins is available on the base module and on
the EVB as well, so enable it in the dts.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
c1d19b107b ramips: RT5350F-OLINUXINO: invert WiFi LED polarity
The polarity of WLAN_ACT LED on the base module needs to inverted
in order to be 'on' when the WiFi interface is active

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
862b820f15 ramips: introduce RT5350F-OLINUXINO.dtsi
The RT5350F-OLINUXINO(-EVB).dts files' content are nearly the same, so to avoid
code duplication this patch creates RT5350F-OLINUXINO.dtsi file which
covers the base board's features. The corresponding RT5350F-OLINUXINO.dts
just includes the new .dtsi and the RT5350F-OLINUXINO-EVB.dts adds the EVB
specific GPIO config.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Kevin Darbyshire-Bryant
fd6bf05548 ramips: add 'lwlll' portmap to mt7530 switch
The Xiaomi Mi Router 3G uses this deranged vlan portmap. Add support so
that packets are not leaked across all switch ports when reset.

Fix a whitespace nit while we're here.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[fix wrong pvids order]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-28 07:23:18 +02:00
Kevin Darbyshire-Bryant
972c126eb6 ramips: mt7621: fix failsafe mode networking
Disable VLANs on mt7621 boards with mt7530 switches on failsafe entry.

Allows failsafe networking to work correctly.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[fixed default case syntax error]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-28 07:23:18 +02:00
Mathias Kresin
36fd53f9a9 ltq-vdsl-mei: disable optimized firmware download
With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and
enabled by default. As soon as the optimized firmware download is
enabled, a watchdog based reboot is trigger between 24h to 48h of
uptime if the board isn't connected to a xdsl line.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-28 07:23:18 +02:00
Martin Schiller
f1ae982f8d ltq-vdsl: fix PM thread suspend and resume handling
This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM
thread handling issues which lead to high system load and watchdog
trigger within 1h of uptime for boards not connected to a xdsl line.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-09-28 07:23:18 +02:00
Magnus Kroken
a9a37526a9 openvpn: update to 2.4.4
Fixes CVE-2017-12166: out of bounds write in key-method 1.

Remove the mirror that was temporarily added during the
2.4.3 release.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2017-09-28 04:05:44 +03:00
Stijn Tintel
fde7688055 kernel: update 4.9 to 4.9.52
Refresh patches.
Compile-tested on x86/64.
Runtime-tested on x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:50 +03:00
Lorenzo Santina
c14cc531e5 hostapd: update wpa_supplicant p2p config
Update the config file to the latest version.

Added CONFIG_EAP_FAST=y because it was the only
missing flag about EAP compared to full config.

Removed NEED_80211_COMMON flag because it is not part
of config file, it is set by the hostapd upstream Makefile.

Other flags are the same as before.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:36 +03:00
Lorenzo Santina
1cde4395d0 hostapd: update wpa_supplicant mini config
Update the config file to the latest version.
Enabled flags are the same as before.

Removed NEED_80211_COMMON flag because it is not part
of config file, it is set by the hostapd upstream Makefile.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:26 +03:00
Lorenzo Santina
65113799d7 hostapd: update wpa_supplicant full config
Update the config file to the latest version.
Enabled flags are the same as before.

Commented CONFIG_IEEE80211W=y flag because it is
set in the Makefile, only if the driver supports it.

Removed NEED_80211_COMMON flag because it is not part
of config file, it is set by the hostapd upstream Makefile.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:14 +03:00
Lorenzo Santina
70ade53692 hostapd: update hostapd mini config
Update the config file to the latest version.
Enabled flags are the same as before.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:01 +03:00
Lorenzo Santina
7865e86b0e hostapd: update hostapd full config
Update the config file to the latest version.
Enabled flags are the same as before.

Removed flag CONFIG_WPS2 because it is no more
needed due to this changelog (2014-06-04 - v2.2):
"remove WPS 1.0 only support, i.e., WSC 2.0
support is now enabled whenever CONFIG_WPS=y is set".

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:26:11 +03:00
Hans Dedecker
754659ddb5 curl: fix disable threaded resolver
Bump to 7.55.1 broke the disable threaded resolver feature as reported
in https://github.com/curl/curl/issues/1784.
As a result curl is always compiled with the threaded resolver feature
enabled which causes a dependency issue on pthread for uclibc.
Fix this issue by backporting the upstream curl commit which fixes
disable threaded resolver.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-27 17:33:48 +02:00
Stijn Tintel
456de21297 ipset: replace patch that was reverted upstream
Use the correct prefix for backports while at it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-26 18:18:44 +03:00
Hauke Mehrtens
253a299604 Revert "brcm47xx: Fix sysupgrade with E1200v1"
This reverts commit 31e9445b7e.

"Linksys E1200 V1" is not a valid board name, as the brcm47xx arch code
can not detect this device. Stefan Lippers-Hollmann also found a typo in
this patch "cybetran" instead of "cybertan".

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-25 23:09:33 +02:00
Marko Ratkaj
56348c95e9 uboot-mvebu: add OpenSSL compat patches
Fixes the following build issue: "undefined reference to `EVP_MD_CTX_create'"

From: Jelle van der Waa <jelle@vdwaa.nl>

The rsa_st struct has been made opaque in 1.1.x, add forward compatible
code to access the n, e, d members of rsa_struct.

EVP_MD_CTX_cleanup has been removed in 1.1.x and EVP_MD_CTX_reset should be
called to reinitialise an already created structure.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 23:08:33 +02:00
Marko Ratkaj
49e6e9ca39 uboot-mvebu: fix SETEXPR redefinition warning
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 23:08:32 +02:00
Marko Ratkaj
ad0e107c23 uboot-mvebu: add missing UBOOT_MAKE_FLAGS variable
This patch removes "/bin/sh: HOSTCPPFLAGS: command not found" errors douring build.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 22:38:29 +02:00
Stijn Tintel
118efdcdba Revert "toolchain/gdb: update to version 8.0.1"
Since version 8.0, gdb requires at least gcc 4.8. Unfortunately some of
the buildbot slaves don't meet this requirement, and fail to build LEDE
after the gdb upgrade. Revert to the previous gdb version for now.

This reverts commit 592abe9ef5.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 23:20:32 +03:00
Stijn Tintel
b0f8b13331 samba36: add Package/samba/Default
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 22:53:59 +03:00
Stijn Tintel
7e58392bcb ipset: bump to 6.34
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 22:52:46 +03:00
Ryan Mounce
592abe9ef5 toolchain/gdb: update to version 8.0.1
Fixes CVE-2017-9778.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
[reference fixed CVE]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 07:42:34 +03:00
Stijn Tintel
d9beae9b9e curl: bump to 7.55.1
Update 200-no_docs_tests.patch.
Refresh patches.

Fixes the following CVEs:
- CVE-2017-1000099
- CVE-2017-1000100
- CVE-2017-1000101

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 07:42:34 +03:00
Stijn Tintel
2ad649d134 iperf: bump to 2.0.10
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 07:42:34 +03:00
Rosen Penev
31e9445b7e brcm47xx: Fix sysupgrade with E1200v1
Entry was missing for some reason.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-09-24 16:28:28 +02:00
Lucian Cristian
a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Marko Ratkaj
0fb14a2b1a tools: flex: fix segfault with glibc 2.26+
Fix segmentation fault caused by implicit declaration of function 'reallocarray'. Added patch will enable
reallocarray() prototype in glibc 2.26+ on Linux systems. This fix will be included in flex 2.6.5.

Fixes LEDE issue: FS#1003 (Flex does not build with GCC 7.2)

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-24 16:28:28 +02:00
Philip Prindeville
f138833d0c kernel: don't scrimp on memory on big iron
x86_64 platforms typically don't lack memory, so don't needlessly
economize memory if fq_codel on capable platforms.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
[Add a comment to the patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
James Christopher Adduono
82739648c0 kernel: kmod-usb-storage-uas
This will allow you to build and package the uas.ko module.
With more routers supporting USB 3.0 host this could help
speed up activities like DLNA and Samba, as well as reduce
CPU utilization over BOT mass storage drivers.

Signed-off-by: James Christopher Adduono <jc@adduono.com>
2017-09-22 19:16:54 +02:00
Kevin Darbyshire-Bryant
3fbf3ab44f ramips: fix missing mediatek wdt
mediatek MT7621 soc watchdog DTS id was renamed from "mtk,mt7621-wdt" to
"mediatek,mt7621-wdt" when driver upstreamed to kernel 4.5

Update mt7621.dtsi & mt7628an.dtsi definitions to match upstreamed
kernel.

Restores hardward watchdog functionality on mt7621 devices under linux
4.9

Tested on: MIR3G

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-22 10:28:59 +02:00
Adrian Panella
ab26fc6c8d uhttp: update to latest version
3fd58e9 2017-08-19 uhttpd: add manifest support
88c0b4b 2017-07-09 file: fix basic auth regression
99957f6 2017-07-02 file: remove unused "auth" member from struct
path_info
c0a569d 2017-07-02 proc: expose HTTP_AUTH_USER and HTTP_AUTH_PASS
ad93be7 2017-07-02 auth: store parsed username and password
fa51d7f 2017-07-02 proc: do not declare empty process variables
a8bf9c0 2017-01-26 uhttpd: Add TCP_FASTOPEN support
e6cfc91 2016-10-25 lua: ensure that PATH_INFO starts with a slash

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2017-09-21 23:03:46 +02:00
Hans Dedecker
47f3645930 libubox: fix uloop race condition
7a10576 uloop: Fix race condition in SIGCHLD handling

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-21 23:03:36 +02:00
Stijn Tintel
6e48eb22b8 kernel: update 4.9 to 4.9.51
Refresh patches.
Compile-tested on octeon and x86/64.
Runtime-tested on octeon and x86/64.

Fixes the following CVEs:
- CVE-2017-14106
- CVE-2017-14497

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-20 23:50:55 +03:00
Stijn Tintel
6c32e05218 arm-trusted-firmware-sunxi: depend on sunxi target
The arm-trusted-firmware-sunxi package is only used by the Allwinner
A64, so only make it selectable for its subtarget sunxi/cortexa53.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-09-20 23:49:36 +03:00
Sandeep Sheriker Mallikarjun
670448a002 at91bootstrap: New package at91bootstrap
at91bootstrap is a second-level bootloader for Microchip(Atmel AT91) SoCs.
It provides a set of algorithms to manage the hardware initialization and
to download the main application or a third-level bootloader(i.e. uboot)
from specified boot media to main memory and execute it.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:46 +02:00
Sandeep Sheriker Mallikarjun
5b9cff921e uboot-at91: Add support for SAMA5D4 Xplained board
Add support for SAMA5D4 Xplained board and options to select & build
u-boot configs for different media storage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:38 +02:00
Sandeep Sheriker Mallikarjun
dacab6472d uboot-at91: Add support for SAMA5D2 Xplained board
Add support for SAMA5D2 Xplained board and options to select & build
u-boot configs for different media storage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:31 +02:00
Sandeep Sheriker Mallikarjun
8f1764b98a uboot-at91: Add support for SAMA5D3 Xplained board
Add support for SAMA5D3 Xplained board and options to select & build
u-boot configs for different media storage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:24 +02:00
Sandeep Sheriker Mallikarjun
71a93a22fd uboot-at91: move BUILD_SUBTARGET from U-Boot/Default to devices
currenlty U-Boot/Default supports only at91 legacy devices.To add
sama5 support, moving BUILD_SUBTARGET from U-Boot/Default to target
devices.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:16 +02:00
Sandeep Sheriker Mallikarjun
09bf441090 at91: Add UBI parameters for sama5d4.
Add UBIFS_OPTS & UBINIZE_OPTS parameters for sama5d4 Xplained board.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:09 +02:00
Sandeep Sheriker Mallikarjun
67303259ee at91: Add SAMA5D4 device
Add support for SAMA5D4 with target device as at91-sama5d4_xplained
in SAMA5 subtarget and build images for SAMA5D4 Xplained board.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:02 +02:00
Sandeep Sheriker Mallikarjun
fdaaa923dd at91: Add SAMA5D2 device
Add support for SAMA5D2 with target device as at91-sama5d2_xplained
in SAMA5 subtarget and build images for SAMA5D2 Xplained board.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:44 +02:00
Sandeep Sheriker Mallikarjun
d7a679a036 at91: Install zImage.
Installing zImage to bin folder of device target.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:36 +02:00
Sandeep Sheriker Mallikarjun
feb1907270 build: add image command for installing zImage file.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:25 +02:00
Sandeep Sheriker Mallikarjun
f8a5ac1a88 at91: Renaming subtarget sama5d3 to sama5
Renaming at91 subtarget sama5d3 to sama5 and using at91-sama5d3_xplained
as a target device in sama5 subtarget.This will enable to add other
sama5d2 & sama5d4 target devices in sama5 subtraget.This will avoid
code duplication when sama5d2 & sama5d4 added as different subtarget.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:14 +02:00
Philip Prindeville
76ba01a392 build: remove @ as it's causing an error
Since $(DownloadMethod/unknown) is being invoked in the expansion of
$(call locked ...) anyway, you can't have an @ because the shell
doesn't know what to do with it.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-09-20 08:50:49 +02:00
Chen Minqiang
40fd77fd10 ipq-wifi: fix missing define of PKG_NAME
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2017-09-20 08:49:49 +02:00