openwrtv4

Author	SHA1	Message	Date
Gabor Juhos	f01a786825	ar71xx: don't assign any MII bus device on QCA9558 by default Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34850	2012-12-22 12:12:43 +00:00
Gabor Juhos	9edcd9d3a3	ar71xx: ag71xx: fix mii_bus_dev sanity check The mii_bus device is not required if phy_mask is zero. The driver will use a fixed connection if it is not specified. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34849	2012-12-22 12:12:41 +00:00
Gabor Juhos	ad0f03d250	ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev Trying to do that causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4 Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000000 00000001 $ 4 : 00000000 802e6390 ffff8f45 00000001 $ 8 : 804b5360 ffffff80 802f93bc 00000000 $12 : 802f93e8 00000000 00000000 00000000 $16 : 8381aba0 8381aba0 00000000 00000000 $20 : 8295eff0 00000032 80000000 004101b8 $24 : 00000000 777265b0 $28 : 82936000 82937cf0 00420000 801d18d4 Hi : 00000000 Lo : 00000001 epc : 801d170c ar7240sw_reset+0x1c/0x19c Tainted: G O ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0 Status: 1100fc03 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button _hotplug(O) Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750) Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000 8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0 8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c 8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c 8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348 ... Call Trace: [<801d170c>] ar7240sw_reset+0x1c/0x19c [<801d18d4>] ag71xx_ar7240_start+0x28/0xc0 [<801cf900>] ag71xx_open+0x1d0/0x258 [<801ec08c>] __dev_open+0xcc/0x130 [<801ec348>] __dev_change_flags+0xc0/0x160 [<801ec490>] dev_change_flags+0x20/0x6c [<801ec5c8>] dev_ifsioc+0xec/0x348 [<801ecdb8>] dev_ioctl+0x594/0x67c [<800ec00c>] do_vfs_ioctl+0x598/0x5ec [<800ec0b0>] sys_ioctl+0x50/0x90 [<8006a3c4>] stack_done+0x20/0x40 Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34848	2012-12-22 12:12:40 +00:00
Gabor Juhos	a0b31f97bb	generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34846	2012-12-22 12:12:35 +00:00
Gabor Juhos	e108cb91c0	ar71xx: rename fix-ar933x-reset patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34798	2012-12-20 14:13:16 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Gabor Juhos	5f82aa4d15	ar71xx: merge machine patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34783	2012-12-19 08:50:45 +00:00
Gabor Juhos	cf99770800	ar71xx: build image for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: reorder MR3220 MultiProfile entry] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34782	2012-12-19 08:50:44 +00:00
Gabor Juhos	b1b7aa674e	ar71xx: add user-space support for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: add uci-defaults/network support] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34780	2012-12-19 08:50:41 +00:00
Gabor Juhos	0767605d17	ar71xx: add kernel support for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: - remove custom LED and button arrays - use separate machine specific patch - update Kconfig] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34779	2012-12-19 08:50:35 +00:00
Gabor Juhos	149534f3ed	ar71xx: image: add OpenMesh profile It allows to build firmware images for all OpenMesh products in one step. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34761	2012-12-18 15:16:05 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Gabor Juhos	fc0da6852e	ar71xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34743	2012-12-17 22:28:09 +00:00
Gabor Juhos	61d715505c	ar71xx: add profile and build image for UniFi AP Pro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34730	2012-12-17 12:28:21 +00:00
Gabor Juhos	abbd18776e	ar71xx: add user-space support for UniFi AP Pro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34728	2012-12-17 12:28:11 +00:00
Gabor Juhos	ff3f28265f	ar71xx: add kernel support for the UniFi AP Pro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34727	2012-12-17 12:28:02 +00:00
Gabor Juhos	2e2c88b625	ar71xx: reorder some patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34674	2012-12-14 07:16:56 +00:00
Gabor Juhos	34411a0cbd	ar71xx: merge unifi outdoor patch into the ubnt-xm one Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34673	2012-12-14 07:16:50 +00:00
Gabor Juhos	d085aad288	ar71xx: add profile and build initramfs image for the WNDR4300 It is not yet possible to use the default squasfsh/jffs2 images on NAND flashes, so only initramfs image is supported for now. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34650	2012-12-12 16:49:52 +00:00
Gabor Juhos	dcdfcb75f0	ar71xx: add user-space support for the NETGEAR WNDR4300 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34649	2012-12-12 16:49:51 +00:00
Gabor Juhos	bc82db7d78	ar71xx: add kernel support for the NETGEAR WNDR4300 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34647	2012-12-12 16:49:49 +00:00
Gabor Juhos	75b71f4a74	ar71xx: add ap91_pci_init_simple helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34646	2012-12-12 16:49:48 +00:00
Gabor Juhos	d7cebac243	ar71xx: add ath79_wmac_register_simple helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34645	2012-12-12 16:49:47 +00:00
Gabor Juhos	ec26814b0e	ar71xx: refresh 3.3 patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34644	2012-12-12 16:49:46 +00:00
Gabor Juhos	cdfc300948	ar71xx: remove superfluous USB patches for 3.3 SVN-Revision: 34643	2012-12-12 16:49:43 +00:00
Gabor Juhos	2b378d11c8	kernel: update linux 3.6 to 3.6.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34639	2012-12-11 20:14:39 +00:00
Gabor Juhos	3cbc1a49e2	ar71xx: load ar934x_nfc driver earlier Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34589	2012-12-10 10:38:11 +00:00
Gabor Juhos	1f7ae58a2c	ar71xx: ar934x_nfc: allow to control DMA data swap via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34588	2012-12-10 10:38:07 +00:00
Gabor Juhos	2581173660	kernel: update linux 3.6 to 3.6.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34578	2012-12-08 15:01:33 +00:00
Gabor Juhos	47f9b2a110	ar71xx: TP-LINK also has a family TL-WDR Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34577	2012-12-07 19:10:57 +00:00
Gabor Juhos	d7ba2b4840	ar71xx: add profile and build image for TP-LINK TL-WA801N/ND Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34576	2012-12-07 19:10:56 +00:00
Gabor Juhos	4f5defdc3b	ar71xx: switch to 3.6.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34414	2012-11-29 17:53:42 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Gabor Juhos	b0b994cf76	ar71xx: set pad6 cfg for AR8327 on the AP136 board Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34316	2012-11-23 20:55:34 +00:00
Gabor Juhos	188908e885	ar71xx: make rb750_nand driver compatible with 3.7 Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34279	2012-11-20 16:29:43 +00:00
Gabor Juhos	8194237789	ar71xx: make ar934x_nfc driver compatible with 3.7 Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34278	2012-11-20 16:29:42 +00:00
Gabor Juhos	4468fd7ae4	ar71xx: refresh rb4xx_nand patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34277	2012-11-20 15:53:17 +00:00
Gabor Juhos	46a3b818b9	ar71xx: remove buffer verification reference from rb4xx_nand.c It is a dead code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34276	2012-11-20 14:40:22 +00:00
Gabor Juhos	674b91ce0e	ar71xx: fix GPIO function selection for AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34275	2012-11-20 14:27:17 +00:00
Gabor Juhos	d833ca527d	ar71xx: restore rb4xx kernel partition size to the original value The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34274	2012-11-20 12:17:45 +00:00
Gabor Juhos	33a99ce46b	ar71xx: install lzma compressed elf kernel image from wget2nand Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34273	2012-11-20 12:17:44 +00:00
Gabor Juhos	68b5aa2fdf	ar71xx/image: provide lzma compressed elf kernel image This will be used on the RB4xx/RB7xx/RB2011 boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34272	2012-11-20 12:17:43 +00:00
Gabor Juhos	97867f8717	ar71xx/image: relink loader.elf image to LOADADDR This allows to load the resulting image directly from RouterBOOT. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34271	2012-11-20 12:17:41 +00:00
Gabor Juhos	8e4cefc7f8	refresh all kernel configurations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34267	2012-11-20 07:19:06 +00:00
Gabor Juhos	d577d69838	ar71xx: use custom LZMA dictionary size for WNDR3700 images Based on a patch by Hannu Nyman. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34248	2012-11-18 20:25:13 +00:00
Gabor Juhos	169e596268	ar71xx: add user-space support for the RB435G board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34240	2012-11-18 10:18:02 +00:00
Gabor Juhos	d44d954dec	ar71xx: add kernel support for the RB435G board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34239	2012-11-18 10:18:01 +00:00
Gabor Juhos	d62bddc620	ar71xx: update PCI IRQ map for RB4xx devices Should fix #12269. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34238	2012-11-18 09:51:04 +00:00
Gabor Juhos	31881357af	ar71xx: create profile and build image for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34237	2012-11-18 09:32:41 +00:00
Gabor Juhos	9da2c85b67	ar71xx: enable sysupgrade for the OpenMesh MR600 Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34235	2012-11-18 09:32:39 +00:00
Gabor Juhos	6380301d01	ar71xx: rename om2p.sh upgrade script to openmesh.sh It will be used on other boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34234	2012-11-18 09:32:37 +00:00
Gabor Juhos	d325e622d2	scripts/om-fwupgradecfg-gen.sh: add support for the MR600 Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34233	2012-11-18 09:32:36 +00:00
Gabor Juhos	c3174179b7	ar71xx: add user-space support for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34232	2012-11-18 09:32:35 +00:00
Gabor Juhos	8d4857d677	ar71xx: add kernel support for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34231	2012-11-18 09:32:33 +00:00
Gabor Juhos	7da001d068	scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh It will be used for non OM2P boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34200	2012-11-14 14:18:33 +00:00
Gabor Juhos	ee94ed4597	ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34198	2012-11-13 20:57:19 +00:00
Gabor Juhos	9c5c079329	ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34197	2012-11-13 20:57:18 +00:00
Gabor Juhos	75c1d3ccc2	ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device [juhosg: - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches - wrap long lines in mach-ubnt-xm - remove default network config, set it from uci-defaults/network instead - remove user-space, and image generation stuff] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34196	2012-11-13 20:57:17 +00:00
Gabor Juhos	7ab0e1566f	ar71xx: add profiles and build images for old PowerCloud System devices [juhosg: - use 'PowerCloud Systems' instead of 'PCS' in the profiles - sort SingleProfile instances in image/Makefile] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34195	2012-11-13 20:57:15 +00:00
Gabor Juhos	62c8ff19ad	ar71xx: add profile and build image for the TL-WA7510N board [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34190	2012-11-13 14:48:03 +00:00
Gabor Juhos	165b7d2173	ar71xx: user space support for the TL-WA7510N [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34188	2012-11-13 14:48:01 +00:00
Gabor Juhos	91bab828aa	ar71xx: add support for TP-Link TL-WA7510N It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34187	2012-11-13 14:48:00 +00:00
Gabor Juhos	ce9d4fadfa	ar71xx: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34186	2012-11-13 14:47:58 +00:00
Gabor Juhos	e92da5e7ae	ar71xx: nuke ath79_set_usb_power_gpio helper It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34088	2012-11-05 13:23:28 +00:00
Gabor Juhos	f2528b1792	ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34087	2012-11-05 13:23:27 +00:00
Gabor Juhos	ed35253f4c	ar71xx: don't use the unknown LED on the ZCN-1523-5 board According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34076	2012-11-04 22:08:54 +00:00
Gabor Juhos	1b744e1ca5	ar71xx: include mtd layout in the command line for ZCN-1523H-* boards Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34074	2012-11-04 21:12:20 +00:00
Gabor Juhos	b78a736dc2	ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34072	2012-11-04 20:15:18 +00:00
Gabor Juhos	7228a91a3b	ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33993	2012-10-29 17:24:30 +00:00
Gabor Juhos	e4db63fd64	ar71xx: add initial support for 3.6 The nand subtarget is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33983	2012-10-28 19:52:02 +00:00
Gabor Juhos	a6549ac1cb	ar71xx: remove NO_AUTOINCR flag from the NAND drivers The flag is not present in 3.6. Also add compatibility patches for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33971	2012-10-28 12:21:15 +00:00
Gabor Juhos	e2ec99889e	ar71xx: ag71xx: fix build_skb arguments for 3.6 Also add a compatibility patch for 3.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33969	2012-10-27 17:11:06 +00:00
Gabor Juhos	3a86affcdd	ar71xx: enable sysupgrade for the CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33960	2012-10-27 08:55:42 +00:00
Gabor Juhos	e99d557c08	ar71xx: add profile and build image for the CAP4200AG Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33958	2012-10-27 08:55:40 +00:00
Gabor Juhos	9287e0c863	ar71xx: add user-space part for the CAP4200AG Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33957	2012-10-27 08:55:39 +00:00
Gabor Juhos	d54c9653e9	ar71xx: add support for the Senao CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33956	2012-10-27 08:55:38 +00:00
Gabor Juhos	3b7cb4eb4a	ar71xx: add ath79_wmac_disable_[25]ghz helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33955	2012-10-27 08:55:37 +00:00
Gabor Juhos	269872fe1e	ar71xx: use mtd_read in wrt160nl_part Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33951	2012-10-27 07:57:58 +00:00
Gabor Juhos	973eda6077	ar71xx: use mtd_read in tplinkpart Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33950	2012-10-27 07:57:57 +00:00
Gabor Juhos	28f3adc2ed	ar71xx: generate 4,8,16M images for the WPE72 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33949	2012-10-27 07:57:55 +00:00
Gabor Juhos	ff481a5518	ar71xx: reject TP-Link images containing a bootloader The original TP-Link firmware images can be flashed via the sysupgrade command, however those may contain a bootloader. Flashing such an image via sysupgrade bricks the board, and it can't be recovered without a serial console. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33944	2012-10-26 18:58:13 +00:00
Gabor Juhos	f1f388d527	ar71xx: rw2458n - fix flash parts See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33867	2012-10-19 18:32:49 +00:00
Gabor Juhos	7a72f01a72	ar71xx: merge machine support patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33820	2012-10-17 18:27:50 +00:00
Gabor Juhos	2e1bc1e15b	ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33819	2012-10-17 18:27:48 +00:00
Gabor Juhos	31387947c8	ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33818	2012-10-17 18:27:47 +00:00
Gabor Juhos	5ffc08e3dc	ar71xx: add a helper function for setting up ETH_CFG register on AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33817	2012-10-17 18:27:45 +00:00
Gabor Juhos	35a91a4fe8	ar71xx: OM2P-HS sysupgrade support Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33803	2012-10-17 08:26:05 +00:00
Gabor Juhos	c5a32cfc92	ar71xx: add support for the OpenMesh OM2P-HS board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33800	2012-10-17 08:26:01 +00:00
Gabor Juhos	f1283d8583	ar71xx: fix sysupgrade for jjPlus JWAP003 [juhosg: change commit message] Signed-off-by: Artur Wronowski <arteqw@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33769	2012-10-14 16:24:26 +00:00
Gabor Juhos	1944f7b916	ar71xx: ew-dorin: added ethernet switch configuration Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33768	2012-10-14 16:24:25 +00:00
Gabor Juhos	62ab2b0da6	ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC Commit r33248 introduced a regression by passing the board name plus 'board=' in the third argument. The board name string has to be put into the image as identifier of the image type. [juhosg: fix OpenMesh template instead of use of string substitution] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33767	2012-10-14 16:24:22 +00:00
Gabor Juhos	befb648642	ar71xx: build image for the TL-WR841N/ND v8 SVN-Revision: 33623	2012-10-04 20:16:06 +00:00
Gabor Juhos	02a85dfd85	ar71xx: user-space support for TL-WR841N/ND v8 SVN-Revision: 33622	2012-10-04 20:16:05 +00:00
Gabor Juhos	196c6c5b45	ar71xx: add support for the TL-WR841N/ND v8 board SVN-Revision: 33621	2012-10-04 20:16:03 +00:00
Gabor Juhos	170cd7a19a	ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac SVN-Revision: 33575	2012-09-27 20:05:42 +00:00
Gabor Juhos	ffc0ea6c5d	ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards With these images, it is possible to use the 'unused' partition of the flash. The 'fat' images can be installed with the sysupgrade command. When a 'fat' image is installed from a regular one, the platform specific sysupgrade script copies the calibration data to the end of the flash. Likewise, when a regular image is installed from the 'fat' version the sysupgrade script copies the calibration data back to the original location. SVN-Revision: 33540	2012-09-25 12:57:41 +00:00
Gabor Juhos	e7b1949d87	ar71xx: automatically find WLAN calibration data on TEW-673GRU SVN-Revision: 33539	2012-09-25 12:57:40 +00:00
Gabor Juhos	8ed8e51e74	ar71xx: automatically find WLAN calibration data on DIR-825-B1 SVN-Revision: 33538	2012-09-25 12:57:38 +00:00
Gabor Juhos	e2504a977a	ar71xx: add missing backslash to uci-defaults/leds (closes #12240 ) SVN-Revision: 33537	2012-09-25 12:49:43 +00:00
Gabor Juhos	e70ad61e44	ar71xx: use different machtype and setup for the TL-MR3040 Should fix #12211. Compile tested only. SVN-Revision: 33535	2012-09-24 18:45:56 +00:00
Gabor Juhos	79ffd1032a	ar71xx: fix a typo in TEW-637GRU image names SVN-Revision: 33460	2012-09-18 14:32:25 +00:00
Gabor Juhos	9a11f882d7	ar71xx: revert DIR-825-B1 wholeflash image support. It should be implemmented in a cleaner way. This reverts the following commits: [ar71xx] dir-825-b1: Fix wholeflash images [ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash" SVN-Revision: 33459	2012-09-18 14:30:57 +00:00
Gabor Juhos	a7c5c4390a	ar71xx: register the NAND flash controller device on DB120 SVN-Revision: 33455	2012-09-17 20:30:57 +00:00
Gabor Juhos	7c85646176	ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read SVN-Revision: 33454	2012-09-17 20:30:55 +00:00
Gabor Juhos	3bdf0bc36f	ar71xx: ar934x_nfc: increase DMA retry count SVN-Revision: 33453	2012-09-17 20:30:54 +00:00
Gabor Juhos	b7cb43f6a6	ar71xx: ar934x_nfc: optimize READOOB operation on large page devices SVN-Revision: 33452	2012-09-17 20:30:53 +00:00
Gabor Juhos	96dde2e591	ar71xx: ar934x_nfc: fix RNDOUT operation SVN-Revision: 33451	2012-09-17 20:30:51 +00:00
Gabor Juhos	338b698fb6	ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices SVN-Revision: 33450	2012-09-17 20:30:50 +00:00
Daniel Dickinson	0f254b4b67	dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). SVN-Revision: 33447	2012-09-17 14:17:12 +00:00
Felix Fietkau	e8893fdf7a	ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x SVN-Revision: 33446	2012-09-17 11:17:29 +00:00
Felix Fietkau	ed14ffc7da	ar71xx: fix WP543 image builds SVN-Revision: 33413	2012-09-15 10:21:21 +00:00
Gabor Juhos	61dc6e65c0	ar71xx: merge machine support patches SVN-Revision: 33389	2012-09-13 07:26:28 +00:00
Gabor Juhos	5804b9d1b7	ar71xx: register the NAND controller device on the RB2011 SVN-Revision: 33388	2012-09-13 07:26:26 +00:00
Gabor Juhos	4fd67c3cd4	ar71xx: add device registration code for the AR934x NAND flash controller SVN-Revision: 33387	2012-09-13 07:26:25 +00:00
Gabor Juhos	10cd35c0e7	ar71xx: package the AR934x NAND driver module SVN-Revision: 33386	2012-09-13 07:26:23 +00:00
Gabor Juhos	1e5fdbeae5	ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x SVN-Revision: 33385	2012-09-13 07:26:22 +00:00
Gabor Juhos	40a5f5c16e	ar71xx: define NAND controller base address and register size for AR934X/QCA955x SVN-Revision: 33382	2012-09-12 19:06:38 +00:00
Gabor Juhos	4ee5b528de	ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x SVN-Revision: 33362	2012-09-10 14:38:01 +00:00
Gabor Juhos	2e0e38ad69	ar71xx: fix QCA955X_EHCI_SIZE SVN-Revision: 33360	2012-09-10 14:32:54 +00:00
Jo-Philipp Wich	caa66bd150	fix description of nand/Ath5k profile (#12149 ) SVN-Revision: 33352	2012-09-09 21:40:26 +00:00
Gabor Juhos	aa2f4d4c8d	ar71xx: add initial support for RB2011UAS-2HnD SVN-Revision: 33349	2012-09-09 14:05:32 +00:00
Gabor Juhos	3686e18727	ar71xx: use routerboot_find_tag to find wlan data offset on RB751 SVN-Revision: 33348	2012-09-09 14:05:30 +00:00
Gabor Juhos	ccabe4a1b4	ar71xx: add RouterBoot related helper routines SVN-Revision: 33347	2012-09-09 14:05:28 +00:00
Gabor Juhos	44bf7c7cc1	ar71xx: define MTD partitions for RB2011 SVN-Revision: 33345	2012-09-09 14:05:24 +00:00
Gabor Juhos	6ae5ec16e0	ar71xx: add preliminary support for Mikrotik RB2011L This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 33344	2012-09-09 14:05:22 +00:00
Gabor Juhos	94bac7366c	ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x SVN-Revision: 33343	2012-09-09 14:05:20 +00:00
Gabor Juhos	7592057774	ar71xx: add dynamic MDIO clock calculation SVN-Revision: 33342	2012-09-09 14:05:17 +00:00
Gabor Juhos	88a5478781	ar71xx: use the RLE library for RB751 SVN-Revision: 33338	2012-09-08 17:51:56 +00:00
Gabor Juhos	73df240bb3	ar71xx: add library code for RLE decoding It will be used for the MikroTik boards. SVN-Revision: 33337	2012-09-08 17:51:54 +00:00
Gabor Juhos	f4be8a76de	ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x SVN-Revision: 33335	2012-09-08 13:39:09 +00:00
Gabor Juhos	70d00ac64e	ar71xx: refresh kernel patches SVN-Revision: 33334	2012-09-08 13:39:04 +00:00
Daniel Dickinson	c3b7139ab2	dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. SVN-Revision: 33326	2012-09-06 18:15:26 +00:00
Gabor Juhos	069f544d2b	ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x SVN-Revision: 33318	2012-09-05 19:26:50 +00:00
Gabor Juhos	81bb246a8d	ar71xx: add rssileds to package set in profile for devices which got them. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33317	2012-09-05 19:22:51 +00:00
Gabor Juhos	11c3392b7f	Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" That was based on assumptions. SVN-Revision: 33310	2012-08-29 10:37:55 +00:00
Gabor Juhos	eb9a97a360	ar71xx: all0315n: fix ethernet according to vendor info Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33309	2012-08-29 10:37:54 +00:00
Gabor Juhos	02cb5f9dcd	ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds SVN-Revision: 33308	2012-08-29 10:37:53 +00:00
Gabor Juhos	0c5688cc38	ar71xx: image: fix Profile name for TL-WA701 (closes #12094 ) SVN-Revision: 33295	2012-08-29 10:37:30 +00:00
Gabor Juhos	5fdbb33db4	ar71xx: Buffalo WZR-HP-AG300H LED support An improved LED support for Buffalo WZR-HP-AG300H. There will be two new packages to go with this patch (ar922x-led-fix-hotplug and ar922x-led-fix-init). These packages essentially perform the same task of disabling "JTAG over GPIO pins" function which is currently required for LEDs on AR922x emac GPIO to work, and are both considered a temporary fix that circumvent this problem. [juhosg: add the hotplug script from the proposed ar922x-led-fix-hotplug package to ar71xx/base-files] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33294	2012-08-29 10:11:55 +00:00
Gabor Juhos	f2030c3113	ar71xx: add profile for Allnet devices Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33287	2012-08-27 14:55:38 +00:00
Gabor Juhos	d65c06c15c	ar71xx: generate image for ALL0315N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33286	2012-08-27 14:55:37 +00:00
Gabor Juhos	4079f3163f	ar71xx: sysupgrade for the ALL0315N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33285	2012-08-27 14:55:36 +00:00
Gabor Juhos	abffa4ecfb	ar71xx: rename all0258n.sh to allnet.sh Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33284	2012-08-27 14:55:35 +00:00
Gabor Juhos	1d96b0275c	ar71xx: detect ALL0315N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33282	2012-08-27 14:55:32 +00:00
Gabor Juhos	eebdd633e4	ar71xx: add support for the Allnet ALL0315N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33281	2012-08-27 14:55:31 +00:00
Gabor Juhos	cca873e8e0	ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33280	2012-08-27 14:55:26 +00:00
Gabor Juhos	5a9c7fda3e	ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a regression with board= kernel command line parameter incorrectly initialised. The faulty builds propogated to the snapshots download area. This makes the device unbootable and TP-Link users have to attach the serial to recover. Here is the q&d way i used to identify MIPS boards that didn't have a corresponding entry in the image/Makefile: for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \ \| sed -n '/MIPS_MACHINE/ { s/^[^"]"$[^"]$".*$/\1/; p; }'`; do grep -q ,$i, Makefile \|\| echo $i; done > missing-boards.new Reported-by: Casper on IRC Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33274	2012-08-26 08:15:11 +00:00
Gabor Juhos	f3d5edffdc	ar71xx: image: fix TL-WR1043ND board id (#12079 ) SVN-Revision: 33272	2012-08-26 06:30:37 +00:00
Gabor Juhos	773b33d7d2	ar71xx: image: group and sort {Single,Multi}Profiles SVN-Revision: 33264	2012-08-23 13:17:47 +00:00
Gabor Juhos	a5e0eb0d95	ar71xx: image: group and sort mtdlayout definitions SVN-Revision: 33263	2012-08-23 13:14:35 +00:00
Gabor Juhos	f0ad972aba	ar71xx: image: use the MultiProfile helper for the Madwifi profile SVN-Revision: 33262	2012-08-23 13:11:25 +00:00
Gabor Juhos	333f030b79	ar71xx: image: automatically build a list of SingleProfiles Use that for Default/Minimal profiles. SVN-Revision: 33261	2012-08-23 13:08:15 +00:00
Gabor Juhos	5dce77837f	ar71xx: image: use the new helpers for the ZyXEL images SVN-Revision: 33260	2012-08-23 13:05:05 +00:00
Gabor Juhos	be4be2d82a	ar71xx: image: use the new helpers for the Zcomax images SVN-Revision: 33259	2012-08-23 13:01:55 +00:00
Gabor Juhos	74bdb68ea4	ar71xx: image: use the new helpers for the WRT400 images SVN-Revision: 33258	2012-08-23 12:58:45 +00:00
Gabor Juhos	8cf9a7b1c7	ar71xx: image: use the new helpers for the WZRHPG30XNH images SVN-Revision: 33257	2012-08-23 12:55:35 +00:00
Gabor Juhos	c965d8ead8	ar71xx: image: use the new helpers for the WHRHPG300N images SVN-Revision: 33256	2012-08-23 12:52:25 +00:00
Gabor Juhos	71af43a7c7	ar71xx: image: use the new helpers for the UBNTXM images SVN-Revision: 33255	2012-08-23 12:49:15 +00:00
Gabor Juhos	097e9938b4	ar71xx: image: use the new helpers for the UBNT images SVN-Revision: 33254	2012-08-23 12:46:06 +00:00
Gabor Juhos	216e9b7a92	ar71xx: image: use the new helpers for the TPLINKOLD images SVN-Revision: 33253	2012-08-23 12:42:56 +00:00
Gabor Juhos	48d6081fa5	ar71xx: image: use the new helpers for the TPLINK-LZMA images SVN-Revision: 33252	2012-08-23 12:39:46 +00:00
Gabor Juhos	8546e00157	ar71xx: image: use the new helpers for the TPLINK images SVN-Revision: 33251	2012-08-23 12:36:35 +00:00
Gabor Juhos	27feea1070	ar71xx: image: use the new helpers for the Planex images SVN-Revision: 33250	2012-08-23 12:33:25 +00:00
Gabor Juhos	4dbabe5c21	ar71xx: image: use the new helpers for the PB4X images SVN-Revision: 33249	2012-08-23 12:30:15 +00:00
Gabor Juhos	bbaa0b9200	ar71xx: image: use the new helpers for the OpenMesh images SVN-Revision: 33248	2012-08-23 12:27:06 +00:00
Gabor Juhos	4edc55f475	ar71xx: image: use the new helpers for the Netgear images SVN-Revision: 33247	2012-08-23 12:23:56 +00:00
Gabor Juhos	d9f933b8b8	ar71xx: image: use the new helpers for the MyLoader images SVN-Revision: 33246	2012-08-23 12:20:46 +00:00
Gabor Juhos	a409d0cf46	ar71xx: image: use the new helpers for the DIR825B1 images SVN-Revision: 33245	2012-08-23 12:17:36 +00:00
Gabor Juhos	b7e05e3a59	ar71xx: image: use the new helpers for the CyberTAN images SVN-Revision: 33244	2012-08-23 12:14:26 +00:00
Gabor Juhos	292f074ad7	ar71xx: image: use the new helpers for the Cameo933x images SVN-Revision: 33243	2012-08-23 12:11:17 +00:00
Gabor Juhos	4c9a428614	ar71xx: image: use the new helpers for the Cameo913x images SVN-Revision: 33242	2012-08-23 12:08:07 +00:00
Gabor Juhos	19d840980f	ar71xx: image: use the new helpers for the Cameo7240 images SVN-Revision: 33241	2012-08-23 12:04:57 +00:00
Gabor Juhos	ce91228e2b	ar71xx: image: use the new helpers for the AthGzip images SVN-Revision: 33240	2012-08-23 12:01:47 +00:00
Gabor Juhos	70e3dda99c	ar71xx: image: use the new helpers for the AthLzma images SVN-Revision: 33239	2012-08-23 11:58:37 +00:00
Gabor Juhos	31a88650d7	ar71xx: image: use the new helpers for the ALFA images SVN-Revision: 33238	2012-08-23 11:55:27 +00:00
Gabor Juhos	2379e6f2a3	ar71xx: image: add a few helper functions These functions will be used to simplify the Makefile. SVN-Revision: 33237	2012-08-23 11:52:18 +00:00
Gabor Juhos	6ebc77af73	ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template SVN-Revision: 33236	2012-08-23 11:49:07 +00:00
Gabor Juhos	a2f82cf7ec	ar71xx: add profile and build image for the TEW-712BR SVN-Revision: 33234	2012-08-22 20:18:44 +00:00
Gabor Juhos	8744f8d183	ar71xx: TEW-712BR user space support SVN-Revision: 33232	2012-08-22 20:12:24 +00:00
Gabor Juhos	8b3d95bba9	ar71xx: add support for the TRENDnet TEW-712BR board SVN-Revision: 33231	2012-08-22 20:09:13 +00:00
Gabor Juhos	4073317695	ar71xx: fix serial clock calculation on AR933x Closes #12031. SVN-Revision: 33230	2012-08-22 19:11:10 +00:00
Gabor Juhos	2811d6c183	ar71xx: fix comment style in mach-tl-wr2543n.c SVN-Revision: 33227	2012-08-22 12:42:59 +00:00
Gabor Juhos	dc13dc1d54	ar71xx: fix mtd layout of the AP113 The 'mtdparts=' prefix and the name of the flash device is missing. SVN-Revision: 33226	2012-08-22 12:39:46 +00:00
Gabor Juhos	5a694e09c8	ar71xx: add ALL0305 board alias For the pure convenience of having a correctly named image and system name in /proc/cpuinfo , until we can do that by having system names in DTS... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33224	2012-08-22 12:33:22 +00:00
Gabor Juhos	0517183b9c	ar71xx: add support for TP-Link TL-WDR3600 The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has only two antennas. [juhosg: remove the custom machine type, change the board name instead] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 33219	2012-08-22 09:43:18 +00:00
John Crispin	968ac3fd03	add led defintion for the WR2543 5GHz WLAN LED Signed-off-by: Andy Leiserson <andy@leiserson.org> SVN-Revision: 33215	2012-08-22 09:10:24 +00:00
Gabor Juhos	182a18a369	ar71xx: setup WLAN LED for the TL-WA901ND v2 Closes #11889. SVN-Revision: 33202	2012-08-16 07:11:30 +00:00
Gabor Juhos	5fc4b7f5fd	ar71xx: uci-defaults/leds for ALL0258N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33165	2012-08-13 14:01:38 +00:00
Gabor Juhos	e320a7e649	ar71xx: simplify misc IRQ handling SVN-Revision: 32948	2012-08-02 11:25:49 +00:00
Gabor Juhos	3e1e52a524	ar71xx: fix AR934X_EHCI_SIZE SVN-Revision: 32947	2012-08-02 11:25:46 +00:00
Gabor Juhos	b873051706	ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND SVN-Revision: 32946	2012-08-02 09:54:41 +00:00
Gabor Juhos	e29d6bec6f	ar71xx: image: allow to use board specific code in the lzma-loader SVN-Revision: 32945	2012-08-02 09:54:33 +00:00
Gabor Juhos	79a8660d67	ar71xx: init switch hw_reset on the TL-WR1043ND board SVN-Revision: 32944	2012-08-02 09:54:28 +00:00
Gabor Juhos	563400ef10	ar71xx: ew-dorin: added router firmware generation [juhosg: remove dead code] Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> SVN-Revision: 32934	2012-08-01 12:24:57 +00:00
Gabor Juhos	8eabe64e6b	ar71xx: ew-dorin: added USB support Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> SVN-Revision: 32933	2012-08-01 12:24:56 +00:00
Gabor Juhos	1af4fd7660	ar71xx: Buffalo WLAE-AG300N wireless led patch Here is the uci-defaults version of the led support for the Buffalo WLAE-AG300N. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32932	2012-08-01 12:24:54 +00:00
Gabor Juhos	010aec0619	ar71xx: Buffalo WLAE-AG300N initial support The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32931	2012-08-01 12:24:52 +00:00
John Crispin	87a72d68f1	fix typo in modules.mk This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR. Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> SVN-Revision: 32870	2012-07-25 19:52:30 +00:00
Florian Fainelli	accbc20045	move watchdog driver to target specific modules.mk SVN-Revision: 32854	2012-07-25 15:50:10 +00:00
Florian Fainelli	23ffbad602	move target specific spi modules SVN-Revision: 32853	2012-07-25 15:50:04 +00:00
Florian Fainelli	1859500829	move target specific leds modules to ar71xx modules.mk SVN-Revision: 32852	2012-07-25 15:50:02 +00:00
Gabor Juhos	21de1b9d85	ar71xx: enable I2C_GPIO, the PB44 board needs that SVN-Revision: 32738	2012-07-15 17:52:52 +00:00
Gabor Juhos	7daf851adf	ar71xx: fix PB44 board detection SVN-Revision: 32737	2012-07-15 17:52:50 +00:00
Gabor Juhos	c7fa38484c	ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi SVN-Revision: 32736	2012-07-15 17:52:48 +00:00
Gabor Juhos	33220828dc	ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0 The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is identical, but requires different firmware headers: TL-WDR4300: 00000040 43 00 00 01 00 00 00 01 00 00 00 00 76 fb 83 40 \|C...........v..@\| TL-WDR4310: 00000040 43 10 00 01 00 00 00 01 00 00 00 00 38 2b 50 6c \|C...........8+Pl\| [juhosg: change commit message, use a different model name] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> SVN-Revision: 32683	2012-07-12 13:38:40 +00:00
Gabor Juhos	d3c8852fd1	ar71xx: select ATH79_DEV_M25P80 for the WRT400N board SVN-Revision: 32679	2012-07-12 08:34:22 +00:00
Gabor Juhos	c75c895d24	ar71xx: airrouter power led support This patch adds support for power led to Unifi Airrouter AP. [juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch] Signed-off-by: Rocco Folino <lordzen@autistici.org> SVN-Revision: 32678	2012-07-12 08:34:21 +00:00
Gabor Juhos	466f010303	ar71xx: unifi reset button support This patch adds support for reset button to Ubiquiti UniFi AP. [juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch] Signed-off-by: Rocco Folino <lordzen@autistici.org> SVN-Revision: 32677	2012-07-12 08:34:20 +00:00
Gabor Juhos	5ce9c90ca8	ar71xx: airrouter reset button support This patch adds support for reset button to Ubiquiti Airrouter AP. [juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch] Signed-off-by: Rocco Folino <lordzen@autistici.org> SVN-Revision: 32676	2012-07-12 08:34:18 +00:00
Gabor Juhos	fe015f399f	ar71xx: swizzle address for PCI byte/word access on AR71xx Closes #11683. SVN-Revision: 32639	2012-07-06 16:33:12 +00:00
Gabor Juhos	b39df5bb81	ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board SVN-Revision: 32638	2012-07-06 11:12:02 +00:00
Gabor Juhos	e258367c19	ar71xx: merge new board patches into the generic patch SVN-Revision: 32637	2012-07-06 11:12:01 +00:00
Gabor Juhos	b020a7e7c3	ar71xx: OM2P LC sysupgrade patch Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 32635	2012-07-06 11:11:58 +00:00
Gabor Juhos	eabf96dc22	ar71xx: set firmware version for the TL-WR2543N This ensures that the resulting firmware can be flashed from the latest (v3.13.17) offical firmware. SVN-Revision: 32617	2012-07-05 16:25:31 +00:00
Gabor Juhos	7c932579fa	ar71xx: make 2.4GHz wlan LED work on the WR2543N Because ath9k does not supports separate LEDs for different bands yet, the 2.4GHz LED will show the activity, even if the 5GHz band is selected. SVN-Revision: 32615	2012-07-05 16:25:26 +00:00
Gabor Juhos	b2f0476871	ar71xx: OM2P sysupgrade support Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 32613	2012-07-05 08:26:57 +00:00
Gabor Juhos	797944d3f1	ar71xx: add support for the OpenMesh OM2P-LC board Patch-by: Marek Linder <marek@open-mesh.com> SVN-Revision: 32611	2012-07-05 08:26:53 +00:00
Gabor Juhos	1ea2a3cfd8	ar71xx: add profile and build image for the Atheros AP136 reference board SVN-Revision: 32609	2012-07-05 08:26:51 +00:00
Gabor Juhos	b219848bfc	ar71xx: AP136 user-space support SVN-Revision: 32608	2012-07-05 08:26:50 +00:00
Gabor Juhos	f0cda65bb6	ar71xx: add initial support for the Qualcomm Atheros AP136 board SVN-Revision: 32607	2012-07-05 08:26:48 +00:00
Gabor Juhos	d1b237b335	ar71xx: add initial support for the QCA955X SoCs SVN-Revision: 32606	2012-07-05 08:26:47 +00:00
Gabor Juhos	7284cf73d6	ar71xx: refactor PCI code to allow registering multiple PCI controllers SVN-Revision: 32605	2012-07-05 08:26:45 +00:00
Felix Fietkau	bfef2d17eb	ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW) SVN-Revision: 32599	2012-07-04 10:55:56 +00:00
Gabor Juhos	b8618fd3f2	ar71xx: improve MDIO busy wait code SVN-Revision: 32586	2012-07-03 15:24:02 +00:00
Gabor Juhos	86013d40d5	ar71xx: remove the built-in MTD map of the ALL0258N Pass the mtd_layout via the kernel command line instead. Also increase the kernel partition size to 1024k, so current kernel can fit in. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32585	2012-07-03 15:24:01 +00:00
Felix Fietkau	5570b76642	ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762 ) SVN-Revision: 32520	2012-06-28 16:05:08 +00:00
Gabor Juhos	7c87391c55	ar71xx: create profile and build image for the TL-WDR4300 board SVN-Revision: 32461	2012-06-19 11:51:20 +00:00
Gabor Juhos	2d97a52045	ar71xx: add user space support for the TL-WDR4300 SVN-Revision: 32460	2012-06-19 11:51:18 +00:00
Gabor Juhos	8b9931fd27	ar71xx: add support for the TL-WDR4300 board SVN-Revision: 32459	2012-06-19 11:51:17 +00:00
Gabor Juhos	e6a10d5cdd	ar71xx: refresh patches SVN-Revision: 32458	2012-06-19 11:51:15 +00:00
Gabor Juhos	86c6543259	ar71xx: make AR8327 LEDs working on the DB120 board SVN-Revision: 32457	2012-06-19 10:44:17 +00:00
Gabor Juhos	f509a87f2d	ar71xx: remove superfluous include of asm/mach-ath79/pci.h SVN-Revision: 32455	2012-06-19 10:13:43 +00:00
Gabor Juhos	1a1121158f	ar71xx: add a common function to configure USB power GPIOs SVN-Revision: 32454	2012-06-19 10:13:41 +00:00
Gabor Juhos	27fea0b6d7	ar71xx: correctly detect NETGEAR WNDRMAC This patch helps properly detect a WNDRMAC device. Before this patch the model is detected as "NETGEAR ?????????N". Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> SVN-Revision: 32453	2012-06-19 10:13:38 +00:00
Gabor Juhos	ee9bc123fb	ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC This adds kmod-leds-wndr3700-usb package to a default build for WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED. Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru> SVN-Revision: 32452	2012-06-19 10:13:37 +00:00
Felix Fietkau	26cf21df02	ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) SVN-Revision: 32447	2012-06-19 00:22:04 +00:00
Felix Fietkau	5d364d0ca1	ar71xx: add support for reading the MAC address from OTP ROM on AR933x SVN-Revision: 32446	2012-06-19 00:21:58 +00:00
Felix Fietkau	dddf321b6e	ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection SVN-Revision: 32336	2012-06-13 12:54:22 +00:00
Felix Fietkau	624505df56	ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) SVN-Revision: 32095	2012-06-06 19:37:49 +00:00
Felix Fietkau	73b8805e78	ar71xx: fix PHY setup on TL-MR3020 (fixes #11572 ) SVN-Revision: 32093	2012-06-06 17:24:12 +00:00
Felix Fietkau	dc9675282e	ar71xx: add a helper function for setting up PHY4 swapping on ar933x SVN-Revision: 32092	2012-06-06 17:24:09 +00:00
Felix Fietkau	02ab0d3ef9	ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install SVN-Revision: 32090	2012-06-06 17:24:01 +00:00
John Crispin	a4d96aae8d	bump to 3.3.8 SVN-Revision: 32055	2012-06-05 06:57:51 +00:00
Luka Perkov	7f00e5ffc6	uboot-envtools: update to 2012.04.01 SVN-Revision: 32051	2012-06-04 21:55:49 +00:00
Gabor Juhos	cd7ab1d30b	ar71xx: add default LED setup for the DB120 board SVN-Revision: 31997	2012-05-29 16:39:23 +00:00
Gabor Juhos	4e40bdc190	ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992	2012-05-29 16:39:17 +00:00
Felix Fietkau	a9cd8446f3	ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality SVN-Revision: 31956	2012-05-28 20:39:50 +00:00
Felix Fietkau	367e4b3994	ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack SVN-Revision: 31934	2012-05-28 02:55:59 +00:00
Felix Fietkau	8039a1bbb2	ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x SVN-Revision: 31925	2012-05-27 21:02:41 +00:00
Gabor Juhos	8865f0923e	ar71xx: fix TL-WR1041 image size SVN-Revision: 31923	2012-05-27 17:21:47 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	c57409e79d	ar71xx: fix an insignificant typo Patch from #11485. SVN-Revision: 31847	2012-05-23 21:05:30 +00:00
Gabor Juhos	013f434f5b	ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD Patch by Kamil Trzciński <ayufan@osk-net.pl> SVN-Revision: 31846	2012-05-23 21:05:25 +00:00
Gabor Juhos	758f670376	ar71xx: add support for TP-Link TL-MR3040 Support for TP-Link TL-MR3040. Power LED not working - always on red, after start should be green. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 31845	2012-05-23 21:05:24 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Felix Fietkau	a3f2fd187b	ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) SVN-Revision: 31736	2012-05-15 10:36:39 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Gabor Juhos	93c9980b94	ar71xx: fix build error if PCI is disabled SVN-Revision: 31646	2012-05-07 21:16:22 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Felix Fietkau	0ff3c396d3	kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes SVN-Revision: 31637	2012-05-06 21:19:14 +00:00
Gabor Juhos	9486904079	ar71xx: add profile and build image for the TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31610	2012-05-05 17:02:41 +00:00
Gabor Juhos	ab897ab04e	ar71xx: add support for the TP-Link TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608	2012-05-05 17:02:35 +00:00
Gabor Juhos	56f2e08537	ar71xx: update 3.3 patches SVN-Revision: 31602	2012-05-05 13:56:35 +00:00
Gabor Juhos	8fffc6d6df	ar71xx: fix a typo in the db120 mach file Reported-by: Sven Eckelmann <sven@narfation.org> SVN-Revision: 31601	2012-05-05 13:56:30 +00:00
Gabor Juhos	cbfce53831	kernel: update linux 3.3 to 3.3.4 SVN-Revision: 31541	2012-04-30 08:38:11 +00:00
Gabor Juhos	3e3a4d3d6b	ar71xx: allow to disable link polling on unused PHYs SVN-Revision: 31533	2012-04-29 18:29:24 +00:00
Gabor Juhos	a447f1810c	ar71xx: enable MIB counters in the built-in switch of the AR934x SVN-Revision: 31476	2012-04-25 13:02:11 +00:00
Gabor Juhos	59b0c1b2b9	ar71xx: TL-WR741NDv4: add WLAN LED config On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 31461	2012-04-24 11:38:44 +00:00
Jonas Gorski	8fd383ae2e	kernel: update linux 3.3 to 3.3.3 SVN-Revision: 31460	2012-04-24 09:25:38 +00:00
Gabor Juhos	9140d4ee44	ar71xx: remove duplicated AP121 Kconfig entry SVN-Revision: 31382	2012-04-20 16:50:16 +00:00
Gabor Juhos	da2cc2c79a	ar71xx: nuke 3.2 support SVN-Revision: 31360	2012-04-19 21:32:05 +00:00
Gabor Juhos	9854d6fb7f	ar71xx: switch to 3.3.2 SVN-Revision: 31359	2012-04-19 21:31:58 +00:00
Gabor Juhos	a6b4b5fd6e	ar71xx: sync 3.3 config SVN-Revision: 31358	2012-04-19 21:31:53 +00:00
Gabor Juhos	ef97415b92	ar71xx: merge/reorganize 3.3 patches SVN-Revision: 31357	2012-04-19 21:31:50 +00:00
Gabor Juhos	408de85883	ar71xx: use ap91_pci_init for RB751{,G} SVN-Revision: 31356	2012-04-19 21:31:48 +00:00
Gabor Juhos	0a9832b50d	ar71xx: move USB device registration directly into rb751{,g}_setup SVN-Revision: 31355	2012-04-19 21:31:43 +00:00
Gabor Juhos	78967e6640	ar71xx: add ap9x_pci_get_wmac_data helper SVN-Revision: 31354	2012-04-19 21:31:42 +00:00
Gabor Juhos	5c9ca38e47	ar71xx: add sanity checks to decode_rle Also use -EINVAL instead of -1. SVN-Revision: 31353	2012-04-19 21:31:40 +00:00
Jonas Gorski	a8f2bc682e	kernel: also update the targets to use 3.2.15 Thanks Gabor for spotting it. SVN-Revision: 31337	2012-04-17 13:12:14 +00:00
Jonas Gorski	3a9b6dc313	kernel: update linux 3.3 to 3.3.2 SVN-Revision: 31336	2012-04-17 12:51:02 +00:00
Jonas Gorski	16b4cbcdd6	kernel: update linux 3.2 to 3.2.14 SVN-Revision: 31222	2012-04-09 14:48:51 +00:00
Gabor Juhos	f14fd53e3c	ar71xx: image: build initramfs images for the WHR boards SVN-Revision: 31209	2012-04-06 06:45:08 +00:00
Gabor Juhos	e295a077ce	ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD Great collaboration on these two fantastic routers on the openwrt forum: https://forum.openwrt.org/viewtopic.php?id=32320 Above all kudos to aryufan. Well done and thank you everyone else who contributed. To-Do: LED for wlan is not yet activated To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by the router Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com> [juhosg: fix line wrapped patch, fix checkpatch errors, add missing kernel patches] SVN-Revision: 31208	2012-04-06 06:45:07 +00:00
Gabor Juhos	fe6d66afe2	ar71xx: add rb750 to diag.sh Support status led in diag.sh for RB750 Patch from: Evangelos Arkalis <arkalis.e@gmail.com> SVN-Revision: 31207	2012-04-06 06:45:04 +00:00
Jonas Gorski	d87efd8c3c	kernel: update linux 3.2 to 3.2.13 and refresh patches Also remove a duplicate patch from lantiq (already in generic). SVN-Revision: 31158	2012-04-01 07:56:55 +00:00
Gabor Juhos	b77217d963	ar71xx: boost SPI flash read performance mtd_speedtest results: page read speed old new delta DB120 929 KiB/s 2597 KiB/s +179.55% TL-WR1043ND v1 754 KiB/s 2166 KiB/s +187.27% TL-WR703N v1 745 KiB/s 2176 KiB/s +192.08% TL-MR3220 v1 752 KiB/s 2154 KiB/s +186.44% TL-WR2543ND v1 564 KiB/s 2130 KiB/s +277.66% TL-WR741ND v2 525 KiB/s 1767 KiB/s +236.57% ALFA-AP96 702 KiB/s 1977 KiB/s +181.62% WNDR3700 697 KiB/s 1965 KiB/s +181.92% SVN-Revision: 31118	2012-03-27 19:38:17 +00:00
Gabor Juhos	102c6df148	ar71xx: improve SPI flash read/write performance mtd_speedtest results: page write speed old new delta DB120 209 KiB/s 226 KiB/s +8.13% TL-WR1043ND v1 122 KiB/s 148 KiB/s +21.31% TL-WR703N v1 153 KiB/s 194 KiB/s +26.80% TL-MR3220 v1 130 KiB/s 156 KiB/s +20.00% TL-WR2543ND v1 158 KiB/s 202 KiB/s +27.85% TL-WR741ND v2 122 KiB/s 152 KiB/s +24.59% ALFA AP96 229 KiB/s 260 KiB/s +13.54% WNDR3700 202 KiB/s 223 KiB/s +10.40% page read speed old new delta DB120 691 KiB/s 929 KiB/s +34.44% TL-WR1043ND v1 372 KiB/s 754 KiB/s +102.69% TL-WR703N v1 375 KiB/s 745 KiB/s +98.67% TL-MR3220 v1 372 KiB/s 752 KiB/s +102.15% TL-WR2543ND v1 307 KiB/s 564 KiB/s +83.71% TL-WR741ND v2 315 KiB/s 525 KiB/s +66.67% ALFA AP96 515 KiB/s 702 KiB/s +36.31% WNDR3700 515 KiB/s 697 KiB/s +35.34% SVN-Revision: 31117	2012-03-27 19:38:15 +00:00
Gabor Juhos	6455178a6a	ar71xx: image: build initramfs images for more boards SVN-Revision: 31116	2012-03-27 19:38:13 +00:00
Gabor Juhos	e2bd975a2a	ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers SVN-Revision: 31115	2012-03-27 19:38:11 +00:00
Gabor Juhos	c7966a12b5	ar71xx: image: pass mtdlayout variables by value SVN-Revision: 31114	2012-03-27 19:38:10 +00:00
Gabor Juhos	692e47f49f	ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs SVN-Revision: 31113	2012-03-27 19:38:08 +00:00
Gabor Juhos	6cd5fb7001	ar71xx: remove the built-in MTD map of the AP96 board Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31112	2012-03-27 19:38:07 +00:00
Gabor Juhos	61ee283899	ar71xx: remove the built-in MTD map of the PB92 board Pass the mtd_layout via the kernel command line instead SVN-Revision: 31111	2012-03-27 19:38:05 +00:00
Gabor Juhos	1094dc1996	ar71xx: remove the built-in MTD map of the Zcomax devices Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31110	2012-03-27 19:38:04 +00:00
Gabor Juhos	24554ef187	ar71xx: reclaim the 'user_property' partition on WHR-* boards SVN-Revision: 31109	2012-03-27 19:38:02 +00:00
Gabor Juhos	87e4ec687b	ar71xx: remove the built-in MTD maps of several boards We are passing the MTD layout via the kernel command line, so it makes no sense to duplicate it in mach-* files. The patch removes the built-in MTD maps of the following boards: * AP113 * ALFA N2/N5 * DIR-600 * DIR-615 * DIR-825 * TEW-6{3,5}2BRP * TEW-673GRU * WHR-G301N * WHR-HP-GN * WHR-HP-G300N SVN-Revision: 31108	2012-03-27 19:38:01 +00:00
Gabor Juhos	e6b685650b	ar71xx: use modules for LED triggers SVN-Revision: 31107	2012-03-27 19:37:59 +00:00
Gabor Juhos	e28cd648b7	ar71xx: disable CONFIG_{I2C,SPI}_GPIO SVN-Revision: 31104	2012-03-27 19:37:53 +00:00
Gabor Juhos	6627f45a87	ar71xx: sync 3.3 config SVN-Revision: 31103	2012-03-27 19:37:52 +00:00
Gabor Juhos	f4d1e3d147	ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 SVN-Revision: 31102	2012-03-27 19:37:51 +00:00
Gabor Juhos	ff5b7ef713	linux: refresh patches against 3.3 SVN-Revision: 31047	2012-03-20 15:55:07 +00:00
Gabor Juhos	c8bf90d414	ar71xx: fix IRQ number for the AR7240 OHCI controller SVN-Revision: 31044	2012-03-20 15:02:48 +00:00
Gabor Juhos	c1dc6df8bd	kernel: update linux 3.2 to 3.2.12 SVN-Revision: 31028	2012-03-19 18:23:31 +00:00
Gabor Juhos	f86e412389	ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027	2012-03-19 15:57:07 +00:00
Gabor Juhos	b50cfe077c	ar71xx: sync kernel configs SVN-Revision: 31026	2012-03-19 15:57:06 +00:00
Gabor Juhos	8a2e4b49de	ar71xx: add initial support for RB750GL SVN-Revision: 31025	2012-03-19 15:57:04 +00:00
Gabor Juhos	d19f3dd512	ar71xx: make rb750_latch_change 'static void' SVN-Revision: 31024	2012-03-19 15:57:03 +00:00
Gabor Juhos	5348f46c80	ar71xx: add latch_change field to rb750_led_platform_data SVN-Revision: 31023	2012-03-19 15:57:01 +00:00
Gabor Juhos	8a471efe01	ar71xx: add platform data for the RB750 NAND driver SVN-Revision: 31022	2012-03-19 15:56:59 +00:00
Gabor Juhos	e89df99083	ar71xx: use a different pll value on DB120 SVN-Revision: 31018	2012-03-19 11:11:22 +00:00
Gabor Juhos	e9b45ebaba	ar71xx: add AR934x specific interface speed setup for ge0 SVN-Revision: 31017	2012-03-19 11:11:20 +00:00
Gabor Juhos	6028889727	ar71xx: remove static MTD maps from AP121/DB120 boards SVN-Revision: 31016	2012-03-19 11:11:19 +00:00
Felix Fietkau	db6e326c56	targets: replace madwifi in profiles with ath5k, madwifi is unmaintained SVN-Revision: 31015	2012-03-19 09:58:13 +00:00
Gabor Juhos	6ac12fbb3c	ar71xx: use AR8327 on the DB120 board SVN-Revision: 31012	2012-03-18 22:06:58 +00:00
Gabor Juhos	f601339e79	ar71xx: add profile and generate image for the JA76PF2 board SVN-Revision: 30958	2012-03-16 18:00:40 +00:00
Gabor Juhos	6036151187	ar71xx: add support for the jjPlus JA76PF2 board SVN-Revision: 30957	2012-03-16 18:00:34 +00:00
Gabor Juhos	a680662391	ar71xx: change LED name prefix on the jjplus boards SVN-Revision: 30956	2012-03-16 18:00:26 +00:00
Gabor Juhos	c00b53f3d0	ar71xx: move micrel PHY driver to the generic linux target SVN-Revision: 30946	2012-03-15 09:25:53 +00:00
Gabor Juhos	ff909edf94	ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports SVN-Revision: 30926	2012-03-13 17:29:38 +00:00
Gabor Juhos	cd6a4cde13	ar71xx: ag71xx: start aneg on switch PHYs after reset SVN-Revision: 30925	2012-03-13 17:29:37 +00:00
Gabor Juhos	7c9534cfd7	ar71xx: ag71xx: poll PHY status of all available switch ports SVN-Revision: 30924	2012-03-13 17:29:36 +00:00
Gabor Juhos	8449eecf5f	ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch SVN-Revision: 30923	2012-03-13 17:29:34 +00:00
Gabor Juhos	1c5ac02a29	ar71xx: reset the switch on AR934x before ethernet device registration SVN-Revision: 30922	2012-03-13 17:29:33 +00:00
Gabor Juhos	17d3131d3c	ar71xx: fix a typo in ar71xx_regs.h SVN-Revision: 30921	2012-03-13 17:29:31 +00:00
Gabor Juhos	66df117d1b	ar71xx: use a dummy callback for interfaces with fixed speed SVN-Revision: 30913	2012-03-12 20:38:58 +00:00
Gabor Juhos	8b2b37ae58	ar71xx: merge ar934x_bo_ddr_flush patch SVN-Revision: 30912	2012-03-12 20:38:57 +00:00
Gabor Juhos	b0bb0793b9	ar71xx: enable UART function for early_printk/console SVN-Revision: 30909	2012-03-12 17:32:39 +00:00
Gabor Juhos	ccc939ebc0	ar71xx: remove a 3.3 patch, it is already in 3.3-rc7 SVN-Revision: 30903	2012-03-12 16:27:57 +00:00
Gabor Juhos	0814e61841	ar71xx: fix Compex WPE72 detection SVN-Revision: 30902	2012-03-12 16:27:56 +00:00
Gabor Juhos	088dd4e879	ar71xx: stop image building if a loader is missing SVN-Revision: 30877	2012-03-11 14:03:28 +00:00
Gabor Juhos	31584880bf	ar71xx: add watchdog driver to the default package list SVN-Revision: 30852	2012-03-08 09:00:17 +00:00
Gabor Juhos	2d89fa7f43	ar71xx: fix WPS button polarity on TL-WR2543N SVN-Revision: 30849	2012-03-07 19:50:53 +00:00
Gabor Juhos	c455a0f7be	ar71xx: ag71xx: fix get_port_link callback SVN-Revision: 30841	2012-03-07 16:32:35 +00:00
Gabor Juhos	5a83b3a5c7	ar71xx: ag71xx: use the generic get_port_link implementation SVN-Revision: 30840	2012-03-07 16:32:34 +00:00
Gabor Juhos	86d852927e	ar71xx: refresh patches against 3.3-rc5 SVN-Revision: 30801	2012-03-03 14:10:29 +00:00
Gabor Juhos	7052847972	ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled SVN-Revision: 30768	2012-03-01 19:49:05 +00:00
Gabor Juhos	9698a499b6	kernel: update linux 3.2 to 3.2.9 SVN-Revision: 30767	2012-03-01 19:49:02 +00:00
Gabor Juhos	6b37484883	ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038 ) SVN-Revision: 30712	2012-02-24 20:41:38 +00:00
Felix Fietkau	c918810414	ar71xx: switch to kmod-gpio-button-hotplug SVN-Revision: 30660	2012-02-20 10:51:48 +00:00
Gabor Juhos	3d20de331d	ar71xx: fix image signature for UBNT-XM boards SVN-Revision: 30626	2012-02-18 14:45:52 +00:00
Gabor Juhos	3004f30f01	ar71xx: remove duplicated define from the D-Link profile SVN-Revision: 30577	2012-02-16 09:03:27 +00:00
Daniel Dickinson	1bb8a7613e	Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default SVN-Revision: 30571	2012-02-16 07:45:28 +00:00
Daniel Dickinson	b797f72319	d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 SVN-Revision: 30570	2012-02-16 07:38:33 +00:00
Daniel Dickinson	c736e2d4b0	Fix partitions for Cameo-based boards; kernel 3.2 is bigger SVN-Revision: 30569	2012-02-16 07:29:26 +00:00
Daniel Dickinson	4685a51301	image: For Cameo-based board fix adding mtd layout to kernel commandline) SVN-Revision: 30568	2012-02-16 07:24:45 +00:00
Gabor Juhos	9a0e17857e	ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards SVN-Revision: 30508	2012-02-13 17:11:58 +00:00
Gabor Juhos	1c57a22aae	ar71xx: add model detection for TL-WR842N/ND SVN-Revision: 30507	2012-02-13 17:11:57 +00:00
Gabor Juhos	3708227f96	ar71xx: zero partition parser data in m25p80 Ths fixes parsing of RedBoot partitions. SVN-Revision: 30427	2012-02-10 20:19:06 +00:00
Gabor Juhos	6c07149c2d	ar71xx: fix platform description SVN-Revision: 30419	2012-02-10 15:27:49 +00:00
Gabor Juhos	766999085a	ar71xx: ag71xx: add BQL support It will be usable only from linux-3.3. Based on a patch by Dave Taht <dave.taht@bufferbloat.net> SVN-Revision: 30417	2012-02-10 14:56:47 +00:00
Gabor Juhos	fc069f030b	ar71xx: add dummy DQL helper functions for 3.2 SVN-Revision: 30416	2012-02-10 14:56:44 +00:00
Gabor Juhos	32a18a05f8	ar71xx: add preliminary support for 3.3 SVN-Revision: 30410	2012-02-10 11:53:56 +00:00
Felix Fietkau	512df38f5c	ar71xx: disable DDR flush for ethernet on AR934x, it is no longer necessary SVN-Revision: 30409	2012-02-10 11:46:37 +00:00
Felix Fietkau	61f48beadd	ar71xx: fix db120 board detection SVN-Revision: 30408	2012-02-10 11:46:31 +00:00
Gabor Juhos	73b9a8bf9b	ar71xx: allow to build ag71xx w/o PCI support enabled SVN-Revision: 30407	2012-02-10 11:46:10 +00:00
Gabor Juhos	fe0c7aac66	ar71xx: merge 3.2 fixes SVN-Revision: 30406	2012-02-10 08:19:33 +00:00
Gabor Juhos	d72bde99cd	ar71xx: merge files-3.2 to files SVN-Revision: 30405	2012-02-10 08:19:31 +00:00
Gabor Juhos	81b7aaefbe	ar71xx: nuke 2.6.39 support SVN-Revision: 30404	2012-02-10 08:19:28 +00:00
Gabor Juhos	650d777f3d	ar71xx: switch to 3.2.5 SVN-Revision: 30403	2012-02-10 08:19:27 +00:00
Gabor Juhos	abeab97efc	ar71xx: refresh 3.2 patches SVN-Revision: 30402	2012-02-10 08:19:25 +00:00
Gabor Juhos	f754063159	ar71xx: 3.2: remove stray semicolons from the PCI fixup patch SVN-Revision: 30400	2012-02-09 21:19:57 +00:00
Felix Fietkau	848dedeb8b	ar71xx: fix ar934x usb reset handling on 3.2 SVN-Revision: 30399	2012-02-09 20:39:41 +00:00
Gabor Juhos	09c45f50d4	ar71xx: 3.2: get rid of an unused variable in ath79_spi.c SVN-Revision: 30391	2012-02-08 20:47:58 +00:00
Gabor Juhos	c126bed503	ar71xx: 3.2: fix AHB clock name in rb4xx_spi SVN-Revision: 30390	2012-02-08 20:47:56 +00:00
Gabor Juhos	81f15f5026	ar71xx: add profile and build image for the TEW-673GRU board SVN-Revision: 30377	2012-02-08 16:26:27 +00:00
Gabor Juhos	48e85cd47b	ar71xx: add support for the TRENDNet TEW-673GRU board SVN-Revision: 30376	2012-02-08 16:26:25 +00:00
Felix Fietkau	d9ff9c44ee	ar71xx: add usb on the pb92 board SVN-Revision: 30007	2012-02-03 09:44:51 +00:00
Gabor Juhos	41bd6bd282	ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards SVN-Revision: 29978	2012-01-31 20:49:34 +00:00
Gabor Juhos	c315ce403b	ar71xx: merge DIR-600 A1 and DIR-615 E4 support SVN-Revision: 29976	2012-01-31 18:37:29 +00:00
Gabor Juhos	dd47afc197	ar71xx: fix ethernet LEDs on the DIR-600-A1 board SVN-Revision: 29975	2012-01-31 18:37:24 +00:00
Gabor Juhos	8200f0c61a	ar71xx: unify LED names on D-Link boards SVN-Revision: 29974	2012-01-31 18:37:15 +00:00
Gabor Juhos	faeca86e50	ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973	2012-01-31 18:37:09 +00:00
Gabor Juhos	97e4ddd012	ar71xx: add support for TP-Link TL-MR11U Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> SVN-Revision: 29972	2012-01-31 18:37:01 +00:00
Gabor Juhos	8766f32b8c	ar71xx: compress kernel binaries in Image/Prepare stage The lzma compressed kernel is used by one of the loaders. SVN-Revision: 29971	2012-01-31 18:36:54 +00:00
Gabor Juhos	d5d37febb4	ar71xx: use dynamically allocated partitions in wrt160nl_part SVN-Revision: 29970	2012-01-31 18:36:51 +00:00
Florian Fainelli	eeb00634a7	add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935	2012-01-28 13:19:49 +00:00
Florian Fainelli	405a0f3905	refresh 3.2 patches SVN-Revision: 29934	2012-01-28 13:19:43 +00:00
Gabor Juhos	b9b768b8d3	ar71xx: use 64k block size for WZR-HP-AG300H SVN-Revision: 29917	2012-01-27 10:42:41 +00:00
Gabor Juhos	ac8116739a	ar71xx: fix sysupgrade image building of atheros boards after r29899 SVN-Revision: 29916	2012-01-27 07:51:09 +00:00
Gabor Juhos	013fe76b36	ar71xx: create the temporary directory before building initramfs images Thanks to Florian for reporting. SVN-Revision: 29915	2012-01-26 21:28:34 +00:00
Gabor Juhos	a5538a18d4	ar71xx: create a profile and build images for Compex WPE72 [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29914	2012-01-26 17:01:44 +00:00
Gabor Juhos	e1e84badaa	ar71xx: add support for Compex WPE72/WPE72NX This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29912	2012-01-26 17:01:41 +00:00
Gabor Juhos	038d4e0d77	ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29905	2012-01-25 07:44:45 +00:00
Gabor Juhos	c11ac55b29	ar71xx: TL-MR3020: fix GPIO polarity for button and switch This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29904	2012-01-25 07:44:43 +00:00
Gabor Juhos	4f3d6c9ae9	ar71xx: use the lzma loader on the Planex boards SVN-Revision: 29900	2012-01-24 20:12:10 +00:00
Gabor Juhos	5fa9768cee	ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage SVN-Revision: 29899	2012-01-24 20:12:08 +00:00
Gabor Juhos	095c236694	ar71xx: fix the AP/Router LED definitons on MZK-W300NH SVN-Revision: 29897	2012-01-24 18:40:38 +00:00
Gabor Juhos	23e1b451dc	ar71xx: preset WLAN LED config on MZK-W300NH SVN-Revision: 29896	2012-01-24 18:40:36 +00:00
Gabor Juhos	23836d5908	ar71xx: remove hardcoded MTD layout from planex files SVN-Revision: 29895	2012-01-24 18:40:34 +00:00
Gabor Juhos	859c915077	ar71xx: pass mtdlayout to Planex boards via command line SVN-Revision: 29894	2012-01-24 18:40:33 +00:00
Gabor Juhos	6ad9bf8d17	ar71xx: remove an unused header file SVN-Revision: 29893	2012-01-24 18:40:31 +00:00
Gabor Juhos	17bb003891	ar71xx: nuke fs_all variable in image/Makefile SVN-Revision: 29880	2012-01-24 09:47:25 +00:00
Gabor Juhos	1fb88e2541	ar71xx: create interim kernel files in a separate dir This reduces the size of the ImageBuilder tarball a lot. SVN-Revision: 29879	2012-01-24 09:47:23 +00:00
Gabor Juhos	a43e2f508f	ar71xx: prebuild all loaders in Image/Prepare stage SVN-Revision: 29878	2012-01-24 09:47:22 +00:00
Gabor Juhos	44517a3789	ar71xx: 3.2: fix build errors if PCI is not enabled SVN-Revision: 29870	2012-01-23 08:52:21 +00:00
Gabor Juhos	778db0a13d	ar71xx: fix compiler warning if PCI is not enabled SVN-Revision: 29869	2012-01-23 08:52:18 +00:00
Gabor Juhos	af015f956c	ar71xx: add initial support for 3.2 Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH SVN-Revision: 29868	2012-01-22 22:38:19 +00:00
Gabor Juhos	386cbfe45b	ar71xx: move arch specific files to files-2.6.39 SVN-Revision: 29867	2012-01-22 22:38:11 +00:00
Gabor Juhos	7b7427e52c	ar71xx: build ALFA AP96 images with default profile as well SVN-Revision: 29866	2012-01-22 22:33:15 +00:00
Gabor Juhos	e7dee3aeed	ar71xx: wrt160nl_part: include module.h and fix compiler warnings SVN-Revision: 29856	2012-01-22 17:55:38 +00:00
Gabor Juhos	a7d344565b	ar71xx: tplinkpart: include module.h SVN-Revision: 29855	2012-01-22 17:55:36 +00:00
Gabor Juhos	6c2638c5e2	ar71xx: rename vsc7385 spi driver SVN-Revision: 29853	2012-01-22 13:51:57 +00:00
Gabor Juhos	bb16739db9	ar71xx: rename ap81 spi driver SVN-Revision: 29852	2012-01-22 13:51:56 +00:00
Gabor Juhos	5ef8b922fa	ar71xx: rename rb4xx spi drivers SVN-Revision: 29851	2012-01-22 13:51:54 +00:00
Gabor Juhos	aad175d5b6	ar71xx: rename the nxp_74hc153 driver SVN-Revision: 29850	2012-01-22 13:51:52 +00:00
Gabor Juhos	ef1c53b7b7	ar71xx: change board id of the UniFi board SVN-Revision: 29849	2012-01-22 13:51:50 +00:00
Gabor Juhos	f90e578903	ar71xx: include linux/module.h in the micrel phy driver SVN-Revision: 29848	2012-01-22 13:51:49 +00:00
Gabor Juhos	fbf81c8e79	ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c SVN-Revision: 29713	2012-01-11 18:00:50 +00:00
Gabor Juhos	67f62cf5cf	ar71xx: disable ath79 in order to get rid of Kconfig warnings SVN-Revision: 29711	2012-01-11 09:14:19 +00:00
Gabor Juhos	88d8cdd503	ar71xx: pb44_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29710	2012-01-11 09:14:18 +00:00
Gabor Juhos	e1b7995aef	ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove SVN-Revision: 29709	2012-01-11 09:14:17 +00:00
Gabor Juhos	67444c7795	ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers SVN-Revision: 29708	2012-01-11 09:14:15 +00:00
Gabor Juhos	0f566a376c	ar71xx: ar71xx_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29707	2012-01-11 09:14:14 +00:00
Gabor Juhos	09a6e3f662	ar71xx: ar71xx_spi: save and restore regs from probe/remove SVN-Revision: 29706	2012-01-11 09:14:13 +00:00
Gabor Juhos	714a9bd641	ar71xx: ar71xx_wdt: add shutdown handler SVN-Revision: 29705	2012-01-11 09:14:11 +00:00
Gabor Juhos	9727256330	ar71xx: refresh patches SVN-Revision: 29683	2012-01-07 19:36:43 +00:00
Gabor Juhos	4edff7d3ef	ar71xx: add a profile and build images for the TL-WR2543N/ND SVN-Revision: 29682	2012-01-07 19:36:42 +00:00
Gabor Juhos	a1dcbc66a6	ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680	2012-01-07 19:36:35 +00:00
Gabor Juhos	a56bdeff9d	ar71xx: allow to specify max read size for m25p80 Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. SVN-Revision: 29679	2012-01-07 19:36:33 +00:00
Gabor Juhos	67b2814842	ar71xx: local mac support on the wndr3700 The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> SVN-Revision: 29675	2012-01-07 17:24:44 +00:00
Gabor Juhos	6c74274c8d	generic: improve MIPS kexec support It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). SVN-Revision: 29674	2012-01-07 16:29:16 +00:00
Gabor Juhos	f638c6207b	ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards SVN-Revision: 29672	2012-01-06 15:54:59 +00:00
Gabor Juhos	1e848b17ad	ar71xx: add support for Redwave RW2458N Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669	2012-01-06 07:20:59 +00:00
Gabor Juhos	84cd8a5ee0	ar71xx: fix RB-750 network configuration SVN-Revision: 29668	2012-01-06 07:20:54 +00:00
Gabor Juhos	8eb0b7ab3d	ar71xx: fix sections mismatch warnings in the nand drivers SVN-Revision: 29667	2012-01-05 18:08:33 +00:00
Gabor Juhos	232eb83f74	ar71xx: fix LED configuration on the RB-750 SVN-Revision: 29666	2012-01-05 18:08:28 +00:00
Gabor Juhos	d65c6fe720	ar71xx: create profile and build image for the ALFA AP96 board SVN-Revision: 29663	2012-01-04 21:13:57 +00:00
Gabor Juhos	b8f0d86115	ar71xx: add inital support for the ALFA Network AP96 board The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662	2012-01-04 21:13:54 +00:00
Gabor Juhos	807e046193	ar71xx: specify console kernel parameter for the Compex boards SVN-Revision: 29660	2012-01-04 17:30:59 +00:00
Gabor Juhos	923f3e3752	ar71xx: allow to use the command line hack on compex devices SVN-Revision: 29659	2012-01-04 17:30:58 +00:00
Gabor Juhos	2f53f82203	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658	2012-01-04 17:30:57 +00:00
Gabor Juhos	301b1b4f92	ar71xx: show correct model name on TL-WA701N/ND boards SVN-Revision: 29657	2012-01-04 17:30:55 +00:00
Gabor Juhos	ac68f0d8fa	ar71xx: add profile and build image for the TL-WA701N/ND boards SVN-Revision: 29656	2012-01-04 17:30:54 +00:00
Gabor Juhos	72019009c7	ar71xx: fix network configuration for the TL-WA901N/ND boards SVN-Revision: 29654	2012-01-04 17:30:52 +00:00
Gabor Juhos	90bfef9ec9	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653	2012-01-04 17:30:50 +00:00
Gabor Juhos	5eb502d9c1	ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652	2012-01-04 17:30:49 +00:00
Gabor Juhos	1045c83527	ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651	2012-01-04 17:30:47 +00:00
Gabor Juhos	88223f87d1	ar71xx: use the new om-watchdog package for OM2P Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648	2012-01-04 17:30:41 +00:00
Gabor Juhos	8854c90119	ar71xx: add profile and build factory image for the Hornet-UB board SVN-Revision: 29637	2012-01-01 19:30:29 +00:00
Gabor Juhos	1d3de89f3c	ar71xx: build images for the ALFA Network N2/N5 boards SVN-Revision: 29636	2012-01-01 19:30:28 +00:00
Gabor Juhos	1e68f10b87	ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635	2012-01-01 19:30:25 +00:00
Gabor Juhos	5c067db8a7	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631	2011-12-31 15:02:46 +00:00
Gabor Juhos	fff02e6ea8	ar71xx: enable SWCONFIG_LEDS SVN-Revision: 29630	2011-12-31 15:02:40 +00:00
Gabor Juhos	8c2482f76e	ar71xx: ag71xx: implement get_port_{link,stats} callbacks SVN-Revision: 29626	2011-12-31 15:02:26 +00:00
Gabor Juhos	557009bbdb	ar71xx: fix LEDs on the WRT400N SVN-Revision: 29624	2011-12-31 13:54:11 +00:00
Gabor Juhos	76dacee995	ar71xx: enable sysupgrade support for airrouter Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614	2011-12-27 16:59:43 +00:00
Gabor Juhos	c6ee919b2a	ar71xx: fix sysupgrade on PB42/PB44 boards SVN-Revision: 29613	2011-12-27 16:57:01 +00:00
Felix Fietkau	db0a1db257	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 ) SVN-Revision: 29598	2011-12-22 05:43:53 +00:00

... 7 8 9 10 11 ...

2156 commits